说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 硬盘基片
1)  hard disk substrate
硬盘基片
1.
Then its CMP properties on hard disk substrate with nickel-phosphorous plated was studied.
进而研究了其在镍磷敷镀的硬盘基片CMP中的抛光特性。
2.
Chemical-mechanical polishing of hard disk substrate with nickel-phosphorous plated in the prepared nanometer SiO 2 slurry was studied.
制备了一种纳米SiO2 抛光液 ,并研究了镍磷敷镀的硬盘基片在其中的抛光性能 ,ChapmanMP2 0 0 0 +表面形貌仪测得抛光后表面的平均粗糙度 (Ra)和波纹度(Wa)分别为 0 0 5 2nm及 0 0 63nm ,为迄今报道的硬盘抛光的最低值。
3.
Chemical mechanical polishing(CMP)is widely used to obtain the atom-scale planarization surface in the manufacturing of computer hard disk substrate.
目前,普遍采用化学机械抛光(Chemical-mechanical polishing,CMP)技术对计算机硬盘基片(盘片)表面进行原子级平整。
2)  hard magnetic disc substrate
硬磁盘基片
1.
In order to obtain the contact pressure distribution and its effect on the flatness errors of aluminum hard magnetic disc substrates,based on the lapping practices of the substrates,the elastic contact mechanical model and boundary conditions between the substrate and PVA fixed abrasive stones are established when the substrate is lapped.
目的为了获得铝质硬磁盘基片研磨过程中的接触压强分布对基片平面度的影响规律。
3)  hard disk substrates
硬盘基板
1.
MgO-Al2O3-SiO2 glass ceramic is an excellent potential material for hard disk substrates with good mechanical properties,and it can essentially meet the requirements of hard disks with higher storage capacity and higher rotation speed.
MgO-A l2O3-SiO2系微晶玻璃是一种优良的磁盘基板备选材料,该材料具有良好的力学性能,能够满足高性能硬盘基板用材料的要求。
4)  hard disk pack
硬磁盘片叠
5)  Disk Substrate
磁盘基片
1.
Research on Mirror Turning Technology for Disk Substrate;
磁盘基片镜面车削技术的研究
6)  HDC Hard Disk in a Chip
芯片硬盘(32引脚,72MB)
补充资料:硬盘转速
   

    转速(Rotationl Speed),是硬盘内电机主轴的旋转速度,也就是硬盘盘片在一分钟内所能完成的最大转数。转速的快慢是标示硬盘档次的重要参数之一,它是决定硬盘内部传输率的关键因素之一,在很大程度上直接影响到硬盘的速度。硬盘的转速越快,硬盘寻找文件的速度也就越快,相对的硬盘的传输速度也就得到了提高。硬盘转速以每分钟多少转来表示,单位表示为RPM,RPM是Revolutions Perminute的缩写,是转/每分钟。RPM值越大,内部传输率就越快,访问时间就越短,硬盘的整体性能也就越好。

    硬盘的主轴马达带动盘片高速旋转,产生浮力使磁头飘浮在盘片上方。要将所要存取资料的扇区带到磁头下方,转速越快,则等待时间也就越短。因此转速在很大程度上决定了硬盘的速度。

    家用的普通硬盘的转速一般有5400rpm、7200rpm两种,7200rpm高转速硬盘也是现在台式机用户的首选;而对于笔记本用户则是4200rpm、5400rpm为主,虽然已经有公司发布了7200rpm的笔记本硬盘,但在市场中还较为少见;服务器用户对硬盘性能要求最高,服务器中使用的SCSI硬盘转速基本都采用10000rpm,甚至还有15000rpm的,性能要超出家用产品很多。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条
盘片