1) Zn cladding coating
锌熔覆层
2) cladding
[英]['klædɪŋ] [美]['klædɪŋ]
熔覆层
1.
RE-WC-steel composite coatings were prepared on 45 steel substrate by using WC particle and 1Cr18Mn8Ni5N stainless steel by means of modified arc spray technique,then the coatings were fused by argon shielded arc cladding.
获得了由弥散分布的强化相增强的熔覆层,强化相主要是WC/W_2C;熔覆层与基体之间为冶金结合;熔覆层硬度可达750HV0。
2.
A hard and wear resistant Ni35B\|SiC coating is formed on a Q235 steel substrate by argon shielded arc cladding.
采用氩弧熔覆工艺在Q235基材上熔覆Ni35BSiC,获得硬度和耐磨性高的熔覆层。
3.
The results show that there is an obvious bright intermediate belt between cladding alloy layer and the body, good metallurgic bonding is formed.
对熔覆层显微组织形貌、硬度分布进行了分析研究。
3) cladding layer
熔覆层
1.
The cracks in the laser cladding layer are the main obstacle of the laser cladding technology application.
熔覆层中的裂纹是激光熔覆技术应用的主要障碍。
2.
The features and microstructure of the cladding layer and interface layer between cladding layer and copper substrate were analyzed.
对熔覆层和熔覆层与基体结合区的形貌和微观组织进行了研究。
3.
Based on the artificial neural network(ANN),a model is established to describe the laser cladding parameters and the characteristic and performance of laser cladding layers.
基于人工神经网络(ANN)技术,采用MATLAB作为开发平台,建立了激光熔覆参数与熔覆层特征及性能之间的关系模型。
4) the number of clad layers
熔覆层数
6) cladding coating
熔覆涂层
1.
Study on shearer's pick with plasma cladding coating;
等离子熔覆涂层截齿的实验研究
2.
Plasma cladding coating in coal mine;
等离子熔覆涂层技术在煤矿中的应用
补充资料：有机覆层:有机覆层
在基体材料表面覆以有机材料的材料保护层。在机械製造中﹐有机覆层的绝大部分是涂装层﹐或称油漆层。此外﹐也有用橡胶或塑料作为覆层的。需要抗酸﹑硷和抗腐蚀性气体和液体的钢铁件﹐常用厚约 3毫米的橡胶(如氯丁橡胶)或塑料(如氯化亚乙烯共聚物)黏在表面﹐可长期保护基体不受腐蚀。这种覆层主要用在大型抗蚀容器或排气系统中。埋在土壤中的金属构件﹐常以聚乙烯带包裹保护。在喷鉬或喷不锈钢的表面上涂覆聚四氟乙烯﹐在150℃温度下摩擦係数很低﹐磨损轻微﹐适於製造低载荷和要求高度清洁的滑动轴承﹐或用在食品﹑精细包装和纺织机械上。各国的Du﹑Dx轴承都是以塑料与金属复合製成的。通过静电喷涂将环氧树脂﹑氯化聚醚﹑聚四氟乙烯以及聚氯乙烯等塑料粉末涂覆在金属表面﹐可获多种抗化学腐蚀性极好的覆层﹐可用於输水﹑污水处理和海洋平台的设备上。有机覆层在辉光放电情况下﹐有机单体可以聚合成无针孔的有机膜﹐用作电容器的介质层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条