1) Cell
[英][sel] [美][sɛl]
泡孔
1.
The cell structure of the samples was observed and the changing regularity of mechanical properties with the rubber powder diameter was studied.
试验结果表明:泡孔的形成、形状及尺寸与胶粉颗粒的大小有关。
2.
At the end of 1990s, the preparation of microcellular polymer foams(MPF) by using supercritical fluids(SCF) were commercialized.
然后对聚合物微发泡材料的理论研究进展进行了介绍,主要回顾了3个方面的研究内容,包括气体在聚合物中的溶解行为、泡孔的形成和长大机理以及聚合物/气体体系的流变行为等。
3.
Microcellular wood fiber-plastic composites(WPC) foams were prepared by a single-screw foaming extruder with supercritical fluid injection.
所制备的木塑泡沫材料的平均泡孔直径小于50μm,泡孔密度大于106个/cm3。
2) Bubble
[英]['bʌbl] [美]['bʌbḷ]
泡孔
1.
Three steps in forming of microcellular plastics namely forming of homogeneous gas/polymer system,nucleation and growing and shaping of gas bubbles are introduced.
并分析了加工工艺因素(温度、压力)等对制品中泡孔尺寸和密度的影响:泡孔直径随挤出压力的增加而减小;泡孔密度随压力的增加而增加;泡孔直径随压力降速率的增大而减小;泡孔密度随压力降速率的增大而增加;而适当提高温度有利于减小泡孔直径、增加泡孔密度。
3) microcellular foaming
微孔发泡
1.
Effect of Foaming Parameter on Cell Morphology in Microcellular Foaming of Supercritical CO_2/PP;
发泡工艺对超临界CO_2／PP微孔发泡泡孔形态的影响
2.
Microcellular foaming polymer materials for the side of cone of loudspeaker;
扬声器折环用微孔发泡高分子材料
3.
Study on Effect of Vibration on Microcellular Foaming of PC
振动对PC微孔发泡过程的影响研究
5) microcellular
微孔发泡
1.
Based on the work of professor Suh of Massachusetts University,the execllent thermal characteristics,processing behavior and mechanical property in particular of the microcellular polymer material were described briefly.
Suh教授等研制开发的微孔发泡塑料为主线,简述了微孔发泡高分子材料优异的力学性能、热性能及加工性能,较详细地介绍了该材料在工业生产中的应用现状,并指出了微孔发泡高分子材料发展的方向。
2.
The research background, the development history, the properties, manufacture, and the potential application of microcellular foam based on the work of professor Suh of Massachusetts university were reviewed, and it would promote the development of this science in our country.
微孔发泡材料是新型的改性热塑性高分子材料 ,微孔的引入提高了高分子材料的韧性、绝缘性、耐热性和耐疲劳性能等。
6) Cellular Property
泡孔性能
补充资料：泡孔
分子式：
CAS号：
性质：亦即微孔，是组成泡沫塑料单个小孔穴的最小结构单元。小孔穴部分或全部为泡壁包围，它是在生产泡沫塑料时，由于发泡剂分解或机械导入气体、或挥发生的挥发、可溶物质溶出的方法形成的。
CAS号：
性质：亦即微孔，是组成泡沫塑料单个小孔穴的最小结构单元。小孔穴部分或全部为泡壁包围，它是在生产泡沫塑料时，由于发泡剂分解或机械导入气体、或挥发生的挥发、可溶物质溶出的方法形成的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条