1) Photoelectric conversion
光电转换
1.
Synthesis and photoelectric conversion of perylene polyimide containing triarylamine units;
含三苯胺结构苝聚酰亚胺的合成及光电转换性能研究
2.
Three squarylium cyanine dyes (Sqs) were investigated to explore their applications in photoelectrochemical solar cells for photoelectric conversion.
考察了三种方酸菁染料修饰纳米晶ＴｉＯ２薄膜电极表面应用于光电化学太阳能电池进行光电转换的情况，发现它们的光电化学性能参数按照Ｓｑ３＞Ｓｑ２＞Ｓｑ１的顺序，随着染料在纳米晶ＴｉＯ２上吸附力的增强而提高。
3.
The theoretical model of the photoelectric film is focused on the analysis of the effects of the structure and technical parameters of the device itself on the photoelectric conversion efficiency of the device.
所建立的光电薄膜理论模型侧重于分析器件本身的结构和工艺参数对器件光电转换效率的影响,给出了光电薄膜不同结构参数和工艺参数与薄膜性能的关系,并利用VC++进行编程,分析计算简便。
2) Photovoltaic conversion
光电转换
1.
Implementation of photovoltaic conversion with self diagnostic function basing on IEEE-1394b;
基于IEEE-1394b协议带有自诊断功能的光电转换实现
2.
Study on the photovoltaic conversion of ZnO/Si heterojunction;
ZnO/Si异质结的光电转换特性研究
3.
Implementation of self diagnostic function of photovoltaic conversion Circuit based on IEEE1394b
具有自诊断功能的IEEE1394b光电转换电路的实现
3) photoelectricity transform
光电转换
1.
According to the principal of photoelectricity transform,the authors developed a k ind of photoelectricity leak detector for blast furance dust collection system of bag type.
利用光电转换原理，研制了高炉煤气除尘布袋光电检漏仪。
2.
WT5”BZ]:In this paper we discuss the traits of photoelectricity transform which impact on digital watermark and propose a robust digital watermark algorithm which can be applied to photoelectricity transform.
本文研究了光电转换对数字水印的影响 ,提出了可应用于光电转换的鲁棒性的数字水印算法和研究思路 ,并给出了实验结
4) photovoltaic
[英][,fəutəuvɔl'teiik] [美][,fotovɑl'teɪk, -vol-]
光电转换
1.
Fabrication and photovoltaic investigation of polypyrrole-TiO_2 nanocomposite films prepared by in-situ self-assembly method;
聚吡咯-二氧化钛自组装复合膜的制备及其光电转换性质
2.
In Photovoltaic Solar Assisted Heat Pump (PV-SAHP) system, the heat pump recycle were used for the compound photovoltaic\thermal utility.
光伏-太阳能热泵(PV-SAHP)系统通过热泵循环，提高、稳定了太阳能光热转换的输出温度，同时维持光电转换在较低工作温度下进行，提高了光电转换效率。
5) photo-electric conversion
光电转换
1.
Electric ciruit design of photo-electric conversion in glass-bottle counter;
玻璃瓶计数器的光电转换电路设计
2.
It is described that by use of photo-electric conversion method, the length information of on-line steel plate used for solding petroleum steel tube is fed into a monolithic computer and recorded automatically, and finally the results as shift number, specifications, material quality, length etc.
用光电转换方法把钢板在线上的长度信息输入到单片机进行自动记录,最终给出班次、规格、材质、长度等打印结果。
6) E/O
电/光转换
1.
After E/O conversion, the detected signals are sent to PC for processing and display through fiber.
介绍了一种利用光纤进行数据传输的场强测量系统,它利用单片机控制实现自动调谐和信号检测,检测到的信号经过电/光转换器得到光信号后,通过光纤传送到微机后进行数据处理和显示。
补充资料：光电转换
光电转换
photovoltaic conversion
guang dian zhuanhuan光电转换(photovol俪e~~)通过光伏效应把太阳辐射能直接转换成电能的过程。单晶硅太阳电池的理论极限转换效率为28%，但实用太阳电池的转换效率比这要低得多。近几年，随着制造太阳电池技术不断进步，光电转换效率有很大提高。目前，实用单晶硅太阳电池的转换效率已达14%，多晶硅ro%，非晶硅5.5%。影响太阳电他转换效率的主要原因:①电池表面的光反射造成的损失;②部分载流子损失;③长波被底电极吸收转换成热造成的损失;④设计或制造工艺问题。近几年，人们为提高光电转换效率进行不懈的努力，取得了一些进展，如在太阳电池受光面涂一层膜以减少反射损失，采用控制杂质浓度，或在电池底层加个背面电场来减少载流子损失等。总之，提高光电转换效率的方法很多，但要较大幅度提高光电转换效率，应多种技术并用，才能收到良好效果。(毛兆明)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条