1) high volume fraction
高体分
1.
The properties thermal expansion and process of high volume fractions SiC_P/Mg composites by vacuum-gas pressure infiltration;
高体分SiC_p/Mg复合材料真空气压浸渗工艺及其热膨胀性能
2) high solid
高固体分
1.
Hydroxyl acrylic acid resin(HAR) with high solid and low viscosity was polymerized from an appropriate acrylic acid monomer in solution.
采用溶液聚合法合成了高固体分低粘度的羟基丙烯酸树脂(HAR),详细讨论了引发剂、链转移剂、反应温度、溶剂等对HAR粘度的影响。
2.
The title high solid acrylic resin is prepared by using solution polymerization process.
采用溶液聚合法合成高固体分丙烯酸树脂,用凝胶渗透色谱(GPC)法分析引发剂的种类和用量、反应温度及聚合工艺对丙烯酸树脂的相对分子质量及其分布的影响。
3.
A series of novel high solid silicone modified hydroxyl acrylic resins for automotive coatings were synthesized using different amount of organosilane coupling agent KH 570 as modifier.
用不同含量的硅烷偶联剂 KH570作为改性剂,合成一系列新型汽车涂料用有机硅改性高固体分羟基丙烯酸树脂,通过水接触角,粘度,铅笔硬度,附着力,耐冲击性等的测试,研究了制备工艺,硅烷偶联剂的含量对树脂性能的影响。
3) high-solid
高固体分
1.
This paper reviews the development situation of high-solid aviation coatings with low solvent content and low pollution.
简要介绍了低溶剂、低污染的高固体分航空涂料的发展概况。
2.
A new type high-solid acrylic resin has been produced.
合成了一种新型高固体分功能性丙烯酸树脂 ,研究了单体组成及用量、引发体系、反应温度与时间对树脂性能的影响 。
3.
This article is on the synthesis of high-solid acrylic resin which performs wonderfuly without environmenetal pollution.
讨论了性能优异且不污染环境的高固体分丙烯酸树脂的合成以及合成工艺、单体选择和配比对树脂性能的影响。
4) high-solids
高固体分
1.
This article describes the synthesis of high-solids hydroxyl alkyd resin using castor oil, polyol and polybasic acid and discusses in detail its synthesis method, match with TDI additive and some physicochemical properties of high-solids poyurthane varnish.
对蓖麻油、多元醇、多元酸的羟基醇酸树脂的合成及与TDI加成物配合制备高固体分聚氨酯清漆进行了论述。
5) high solid content
高固体分
1.
The synthetic technology and contitions of melamine resin with low viscosity and high solid content were discussed, the effect of mole ratio of reactants, temperature and pH on reaction process and performance of the resin wave discussed as well.
叙述了低粘度高固体分水溶性蜜胺树脂的合成工艺和条件。
2.
,gained high solid content alkyd resin.
以废旧回收的聚酯高分子材料(PET)为原料,经过高温酸降解反应后,再加入多元醇、催化剂等反应,制成高固体分醇酸树脂。
6) polymer melts
高分子熔体
1.
Segment diffusion and chain relaxation modes in polymer melts or in concentrated polymer solutions are dominated by certain physical laws which are specifically regarded to represent the universal features of polymer dynamics.
高分子熔体或浓溶液中链段扩散和链的弛豫模式满足普适的物理定律,这些定律代表了高分子链动力学的普遍特征。
2.
An internal strain tensor was adopted to represent the conformation structures for polymer melts.
提出了一个高分子熔体内部结构流变模型，采用大分子构象张量表述，并结合经典弹性力学与大分子动力学求得自由能各向异性唯象表达式，运用Ｈａｍｉｌｔｏｎｉａｎ／ＰｏｉｓｏｎＢｒａｃｋｅｔ方法从自由能函数和耗散张量推导建立了高分子构象张量动力学方程与相应的应力张量表达式。
3.
In the first chapter, mainly concerned on the designing and testing process of a new PTV (particle tracking velocimetry) rheometer for polymer melts.
研究分析了市场上目前存在的流变仪及其特点,针对我们特定的研究对象高分子熔体的相关性质改进了传统流变仪的设计,参考Akron大学王十庆教授高分子溶液PTV流变仪,扩大仪器测量的范围与精度,从而使研究的剪切场更接近于工业加工过程中的剪切场。
补充资料：高体
1.高的品位。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条