1) reinforced particle size
![点击朗读](/dictall/images/read.gif)
增强体颗粒尺寸
2) Particle Size
![点击朗读](/dictall/images/read.gif)
颗粒尺寸
1.
Influence of aggregate particle size on the expansion behavior of mortar bars under autoclave condition;
颗粒尺寸对砂岩集料压蒸膨胀行为的影响
2.
Preparation of mixed particle sizes of Ni(OH)_2 electrode and its charge-discharge performance;
混合颗粒尺寸Ni(OH)_2正极的制备及其充放电性能
3.
On-line Particle Size Measurement Using Light Extinction;
![点击朗读](/dictall/images/read.gif)
颗粒尺寸在线测量的光透消光法
3) grain size
![点击朗读](/dictall/images/read.gif)
颗粒尺寸
1.
Comparison and research of grain size measurement of ultrafine powder;
![点击朗读](/dictall/images/read.gif)
超微颗粒尺寸测量方法比较研究
2.
When the grain size decreases, the moisture sensitivity increases, and the time of effect increases too.
粉料颗粒尺寸减小时敏感度增高,响应时间加快。
4) particulate reinforcement
![点击朗读](/dictall/images/read.gif)
颗粒增强体
5) particle reinforcement
![点击朗读](/dictall/images/read.gif)
颗粒增强体
6) reinforcers
![点击朗读](/dictall/images/read.gif)
增强体颗粒
1.
The effects of high energy ball milling and general mixing on the spatial distribution of reinforcers of the SiC p(B 4C p)/Al composites have been investigated systematically by means of qualitative and quantitative methods.
采用定性和定量手段系统比较了高能球磨法与常规混合法对SiCp(B4Cp)/Al复合材料增强体颗粒分布均匀性的影响。
补充资料:刚性颗粒增强体
分子式:
CAS号:
性质:作为陶瓷基复合材料增强体的刚性颗粒,一般具有以下特点:(1)高模量、高硬度、高强度、高热稳定性及化学稳定性;(2)增强体与基体之间应有一定的结合度;(3)增强体的热膨胀系数比基体材料大,形成热膨胀系数失配,促使基体处于径向受张,切向受压的应力状态;(4)在一定的范围内,增强体的颗粒越大,复合材料的韧性可以提高但强度降低;(5)不同形貌的刚性颗粒增强体对于裂纹的偏折,桥联作用不同。刚性颗粒增强陶瓷基复合材料,比单相陶瓷具有更好的常温力学性能,比延性颗粒补强陶瓷基复合材料具有更好的高温力学性能。这类材料能够耐高温,高应力,是制造切削刀具,高速轴承和陶瓷发动机部件的优良候选材料。
CAS号:
性质:作为陶瓷基复合材料增强体的刚性颗粒,一般具有以下特点:(1)高模量、高硬度、高强度、高热稳定性及化学稳定性;(2)增强体与基体之间应有一定的结合度;(3)增强体的热膨胀系数比基体材料大,形成热膨胀系数失配,促使基体处于径向受张,切向受压的应力状态;(4)在一定的范围内,增强体的颗粒越大,复合材料的韧性可以提高但强度降低;(5)不同形貌的刚性颗粒增强体对于裂纹的偏折,桥联作用不同。刚性颗粒增强陶瓷基复合材料,比单相陶瓷具有更好的常温力学性能,比延性颗粒补强陶瓷基复合材料具有更好的高温力学性能。这类材料能够耐高温,高应力,是制造切削刀具,高速轴承和陶瓷发动机部件的优良候选材料。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条