1) multiple thin film method
复合薄膜法
1.
Presence of Methane Sulfonic Acid(MSA) in individual particles was determined with an electron microscope using multiple thin film method.
2μm),利用复合薄膜法和电子显微镜检测甲磺酸粒子。
2.
The optimal reaction conditions of multiple thin film method were determined.
通过实验确定了复合薄膜法的最佳反应条件为 :硝酸灵膜厚度为 1 2nm ,BaCl2 膜厚度为 2nm ;采用辛醇蒸汽来促进粒子与复合薄膜的反应 ;样品在蒸汽中的处理时间为1 8h。
3.
The aerosol particles were measured with bulk analyses by ion chromatography and analyses of individual particles by multiple thin film method and X_ray analysis technique.
用离子色谱对粒子总量进行了总体分析 ,用复合薄膜法和X_射线分析法对单个粒子进行了分析 。
2) composite film
复合薄膜
1.
Expandable graphite-filled polymer (LDPE) composite film materials for flame retardancy;
EG填充无卤阻燃型LDPE复合薄膜阻燃性能研究
2.
Preparation and anticoagulation evaluation of emodin/poly(lactic acid) composite films;
大黄素/聚乳酸物复合薄膜的制备及抗凝血研究
3.
Structure and properties of MoS_2-Ti composite films deposited by unbalanced magnetron sputter ion plating;
非平衡磁控溅射离子镀MoS_2-Ti复合薄膜的结构及性能
3) composite films
复合薄膜
1.
TiO2-SiO2 composite films is prepared doping a cationic surfactant cetyltrimethlammonium bromide(CTAB) by solgel method.
利用红外光谱(IR)研究掺杂薄膜表面结构特征;紫外分光光度计UV-VIS-NIR研究不同实验条件下制备的复合薄膜吸收透过性的影响;利用反射式椭圆偏振光谱仪(ELLIP)测试薄膜的椭偏参数及Cauchy模型对椭偏参数进行计算机数据拟和,获得了掺杂的TiO2-SiO2复合薄膜光学常数在300-700nm波长范围的色散关系。
2.
Optical behavior of composite films was researched.
讨论了纳米TiO2在线型低密度聚乙烯(LLDPE)/低密度聚乙烯(LDPE)复合体系中的分散和体系流变行为,研究了复合薄膜的光学性能。
4) Composite thin films
复合薄膜
1.
ITO/TiO2/CdS composite thin films were successfully prepared in aqueous system by electrodeposition of CdS nanoparticles on ITO/TiO2substrate.
实验表明,电镀液的组成、实验温度可影响薄膜中CdS纳米粒子的生长,从而使不同条件获得的复合薄膜电极的光电转换效率不同,实验温度为40℃、电镀液的组成为CCd2+=0。
2.
The uniform and transparent nanometer TiO2/SiO2 composite thin films were prepared successfully on clear glass in this paper.
用溶胶-凝胶法在清洁的玻璃表面成功制备了均匀透明的纳米TiO2/SiO2复合薄膜,并用扫描电镜,红外光谱仪,综合热分析仪和接触角测定仪对薄膜的结构和性质进行了研究。
5) laminated films
复合薄膜
1.
Application of Aqueous PU Adhesive Modified by Epoxy Resin in Laminated Films;
环氧改性水性聚氨酯胶粘剂在复合薄膜中的应用
2.
It was found that the properties of copolymer PUA were super to that blend PUA in the applications of laminated films.
结果表明,在复合薄膜应用方面,共聚型PUA乳液的性能优于共混型PUA乳液。
3.
A series of aqueous polyurethane adhesives were synthesized by means of four polymer polyatomic alcohols;properties of aqueous polyurethane adhesives were investigated taking vacuum aluminum laminated films of VMCPP, VMPET,OPP,and PE as laminated films;at the same time,the effect of polyurethane structure on peeling strength and drying speed of isocyanates and adding solvent were analyzed.
用不同结构聚酯二元醇为原料合成出一系列水性聚氨酯(PU)胶粘剂,以CPP镀铝膜、PET镀铝膜、OPP、PE为复合薄膜,探讨了聚酯结构对水性PU胶粘剂粘接性能的影响,同时还分析了异氰酸酯类型、外加溶剂对剥离强度和干燥速度的影响。
6) composite thin film
复合薄膜
1.
Preparation and characterization of PANI/CuTsPc composite thin films by layer-by-layer self-assembly
聚苯胺/磺化酞菁铜自组装复合薄膜的制备与表征
2.
Optical absorption characteristics of nanometer-sized metal particles dispersed composite thin films are investigated based on the Mie scattering theory.
根据M ie散射理论,研究了金属纳米颗粒镶嵌在载体介质中的复合薄膜的光吸收特性,计算得到Cu的介电常数与波长的关系。
3.
The results indicated that ZnO/TiO2 composite thin film with good crystal and absorption spectrum can be obtained after dipped in Zn(Ac)2 for 3 h with proper heat treatment,and.
用丝网印刷结合溶胶凝胶法制备了多孔TiO2薄膜,用溶液浸渍法制备了ZnO/TiO2复合薄膜;对薄膜的热处理制度、表面形貌、横断面结构、吸光度等进行了分析;组装电池,测试了电池的光电性能,结果表明:浸渍Zn(Ac)23 h,经过适当的热处理后,可以形成结晶良好,吸光度较好的ZnO/TiO2复合薄膜,电池的开路电压,短路电流以及光电转换效率均得到较大的提高。
补充资料：导电薄膜层合复合法
分子式：
CAS号：
性质：属于复合导电材料制备方法中层状复合法之一。其制备过程首先以导电材料(包括金属和非金属导电材料)制备导电性薄膜，然后与高分子基体材料进行层状复合，构成由导电层和非导电层组成的复合材料。其导电机理为电流在复合材料中的导电层中运动，非导电层起支撑和隔离作用。其导电能力仅与其中导电材料的性质有关，但是其导电性能具有明显各向异性。以导电高分子材料与常规高分子材料进行薄膜层合复合时能提高导电材料的机械和化学稳定性。
CAS号：
性质：属于复合导电材料制备方法中层状复合法之一。其制备过程首先以导电材料(包括金属和非金属导电材料)制备导电性薄膜，然后与高分子基体材料进行层状复合，构成由导电层和非导电层组成的复合材料。其导电机理为电流在复合材料中的导电层中运动，非导电层起支撑和隔离作用。其导电能力仅与其中导电材料的性质有关，但是其导电性能具有明显各向异性。以导电高分子材料与常规高分子材料进行薄膜层合复合时能提高导电材料的机械和化学稳定性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条