1) add alkaline methods
加碱方式
2) heating methods
加热方式
1.
The small-diameter lumbers of Daimyo Oak(Quercus dentata) were dried with consecution-heat method and intermittent-heating methods(intermittent 2h and intermittent 6h) to study the occurred stress of surface layer of them during conventional drying process.
结果表明,随着试材的含水率降低,其表层全应力最初表现为拉应力,拉应力增大到最大值后,逐渐减小直至消失,然后转变为压应力,压应力达到最大值后,逐渐减小直到干燥结束;残余应力是先逐渐增大,达到最大后又减小;3种加热方式下,试材表层应力的变化趋势基本一致,但是试材的表层应力间歇加热的明显小于连续加热的,间歇6h试材的表层应力最小;同一含水率水平下,表层应力弦切板的比径切板大。
2.
The results showed that the change of tress of surface layer with three kinds of heating methods were in a similar way.
研究小径木白桦锯材在连续加热方式和间歇加热方式(间歇2h和间歇6h)干燥过程中表层应力的产生、发展变化规律。
3.
The dechlorination of PVC by thermal decomposition with different heating methods and carrier gas characteristics were studied.
为了使含氯废塑料能喷入高炉必须进行脱氯处理 ,研究了热解脱氯时加热方式及载气性质对脱氯率的影响。
3) Heating mode
加热方式
1.
Extracted from the authors' new book on induction heating,this comprehensive overview of gear hardening includes sections on material selection,hardness patterns,coil design and heating modes.
本文摘自作者关于电磁感应热处理的新书,全面地概述了齿轮淬火,包括零件的材料选取、硬度模式、线圈设计和加热方式等。
2.
Extracted from the authors' new book on induction heating,this comprehensive overview of gear hardening includes sections on material selection,hardness patterns,coil de- sign and heating modes.
本文摘自作者关于电磁感应热处理的新书，全面地概述了齿轮淬火，包括零 件的材料选取、硬度模式、线圈设计和加热方式。
4) heating method
加热方式
1.
The influence of heating method on the quality of extrusion ice cream;
加热方式对挤压冰淇淋品质的影响
2.
The selection of heat source and heating method not only influences the quality of treated glass fiber products,but also influences the production cost directly.
热源和加热方式的选择不但影响玻璃纤维表面处理产品性能质量,而且直接影响到生产成本。
3.
It is considered that heating method,selection and reasonable utilize of filler metals and fluxes,and structure design of welding joint are dominating factors influencing the welding quality,and the heating method has revolutionary significance for the fabrication of PCD tools.
对国内外PCD工具研制现状进行了综合评述 ,认为加热方式、钎料钎剂的选择与合理使用以及焊接接头的结构设计是影响PCD工具焊接质量的主要因素 ,而加热方式对于PCD工具制作具有革命性意义。
5) adding potassium way
加钾方式
6) enzyme addition
加酶方式
补充资料：油气田开发方式(见油气田生产方式)
油气田开发方式(见油气田生产方式)
development pattern of oil and gas field:see recovery pattern of oil and gas field
a垃d gas月e卫d) 、‘。尸卫Jlent见油气田小冰、*pa士teroof ojl
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条