1) adsorption amount of plasticizer
增塑剂吸收量
1.
This paper discussed the feasibility of alternating the sequences of charging traditional main dispersing agents in the isothermal water charging process for the production of PVC by 70 m3 polymerizer,the influences arising therefrom on the stability of system,and the desired beneficial changes for PVC resins in properties,such as adsorption amount of plasticizer.
讨论了国内70 m3聚合釜等温水加料工艺传统的主分散剂加料顺序更迭的可行性,以及由此产生的对体系稳定性的影响程度和期望的PVC树脂在增塑剂吸收量等方面的有益变化。
2) plasticizer take-up test
增塑剂吸收试验
3) plasticizer acceptance
增塑剂吸留量
4) absorbed dose
吸收剂量
1.
Absorbed dose point kernels of beta ray source;
β放射性核素辐射源的吸收剂量点核函数
2.
Estimation of internal irradiation absorbed dose for nanometer-iron nuclide targeted therapy of liver cancer;
纳米铁核素靶向治疗肝癌的内照射吸收剂量估算
3.
Average Absorbed Dose of Entire Body Caused by Per Unit Neutron Fluence for Monoenergetic Neutron for Chinese Man;
单位中子注量照射中国参考人产生的全身平均吸收剂量
6) Absorbed dose rate
吸收剂量率
1.
We have calculated a series of thyroid s absorbed dose rate when the γ ray which was generated from the warhead penetrated the various depths of the lead glass via the model.
以甲状腺为研究对象,应用蒙特卡罗方法通用软件MCNP4B程序建立模型,模拟计算了操作人员在操作核弹头时,弹头中产生的γ射线透过各种厚度的铅玻璃时人体甲状腺吸收剂量率。
2.
The absorbed dose rates from 10B(n,a)7Li,14N(n,p)14C,1H(n,r)2D and fast neutron elastic scattering reaction are considered.
吸收剂量率主要来自以下四个反应:~(10)B(n,α)~7Li,~(14)N(n,p)~(14)C,~1H(n,γ)~2D,快中子弹性散射反应。
3.
Neutron and γ-ray absorbed dose rate in the air at 1 m distance from the source were calculated with the results of 1.
cm2,距离该源1 m处空气对中子和γ射线的吸收剂量率分别为1。
补充资料：增塑剂TBP
国标编号 ----
CAS号 13463-40-6
分子式 Fe(CO)5
分子量 195.90
粘稠的黄色液体;沸点102.8℃(99.5kPa);熔点-21℃;溶解性:溶于水，溶于乙醇、乙醚、苯、强碱和浓酸;密度：;稳定性:遇光、热易分解;危险标记;主要用途:用作雷普法(Reppe)烯烃加一氧化碳、水制脂肪醇的催化剂。热介得纯铁粉，用作磁性材料
2.对环境的影响:
急性毒性：LD5012mg/kg(兔经口)；240mg/kg(兔经皮)；22mg/kg(豚鼠经口)；LC507g/m3/10M
3.现场应急监测方法:
便携式化学发光检测器
4.实验室监测方法:
磺基水杨酸比色法《空气中有害物质的测定方法》(第三版)杭士平主编
菲绕啉比色法《空气中有害物质的测定方法》(第三版)杭士平主编
5.环境标准:
前西德(1975) 车间卫生标准0.8mg/m3
6.应急处理处置方法:
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条