1) absorbency
[英][əb'sɔ:bənsi] [美][əb'sɔrbənsɪ]
吸液倍率
1.
The absorbency and adsorption of the self-preparing poly(acrylic acid) superabsorbent(PAAS) are investigated in single and binary nitrate solutions of heavy metal ions.
在Pb2+、Ni2+、Cd2+、Zn2+、Mn2+和Cu2+的一、二元溶液中,PAAS的吸液倍率随时间延长而增加,约50min达吸液平衡,一元金属离子溶液中平衡吸液倍率为160~190g/g,而对Cr3+溶液,最大为120g/g;二元金属离子混合溶液中平衡吸液倍率都在150~180g/g之间,有Cr3+存在时平衡吸液倍率最小。
2) water absorbency
吸水倍率
1.
The effects of crosslinker,initiator,neutralizaiton degree,reaction temperature,expanded vermiculite and mass ratio of monomers on water absorbency are researched.
考察了交联剂用量、引发剂用量、单体浓度、中和度、反应温度、膨胀蛭石含量及单体质量比对吸水倍率的影响,试验结果表明:当膨胀蛭石含量为20wt%时,交联剂用量为0。
2.
In this paper,the effects of valence and kind of various metal ions and pH values of the external solutions on water absorbency of the polyacrylamide/attapulgite superabsorbent composite were studied systematically.
系统考察了金属离子的价态、种类以及溶液的pH值对聚丙烯酰胺/凹凸棒粘土复合高吸水性树脂吸水倍率的影响。
3.
Factors such as molecular weight, kind of crosslinking agent,amount of crosslinking agent,absorbing temperature and absorbing time affecting on water absorbency were studied.
考察了原料分子量、交联剂种类、交联剂用量、吸水温度以及吸水时间等对树脂吸水倍率的影响。
3) absorbency
[英][əb'sɔ:bənsi] [美][əb'sɔrbənsɪ]
吸水倍率
1.
The maximum absorbency of the superabsorbent in dist.
9%的水溶液中吸水倍率为133g/g。
2.
The influence of the dosage of dispersant,acetone and ammonium persulfate on the absorbency performance of the polymer was also investigated.
以丙烯酸为原料,N,N-亚甲基双丙烯酰胺为交联剂,PVA1788为高分子乳化剂,环己烷为溶剂,采用先乳化后聚合的方式,制备具有多孔结构的共聚物,然后进行表面交联处理得到吸水速度小于10 s的高吸水性树脂,同时还研究了分散剂用量、丙酮用量和过硫酸铵用量对树脂吸水倍率的影响。
4) water absorbent rate
吸水倍率
1.
Effects of ions on water Absorbent rate of water retaining agent
不同价态离子对保水剂吸水倍率的影响
2.
The effects of phosphate and potassium fertilizers on water absorbent and nutrients holding ability of water retaining agent(WRA) were studied by determining water absorbent rate and amounts of absorbed and fixed fertilizers by WRA in different phosphate and potassium fertilizers,such as ammonium phosphate,super phosphate,potassium chloride,and potassium sulfate.
通过对保水剂在磷肥、钾肥溶液中的吸水倍率和对肥料养分吸持量的测定,研究了不同磷、钾肥对保水剂吸水、保肥性能的影响。
3.
The effects of nitrogen fertilizers on water absorbent and nutrients holding ability of water retaining agent(WRA) were studied by determining water absorbent rate and amounts of absorbed and fixed fertilizers by WRA in different nitrogen fertilizers,such as urea,ammonium bicarbonate,ammonium nitrate,ammonium sulfate,and ammonium chloride.
测定保水剂在不同氮肥(尿素、碳酸氢铵、硝酸铵、硫酸铵、氯化铵)溶液中的吸水倍率和对肥料养分的吸持量,分析不同氮肥对保水剂吸水、保肥性能的影响。
5) oil-absorption times
吸油倍率
1.
The influences of modifier content was analysed on oil-absorption speed and times of the high oil-absorption resin,the influences of cross linker,dispersant,initiator and polymerization temperature were investigated on oil-absorption times of the high oil -absorption resin.
分析了改性剂的用量对树脂吸油速率和吸油倍率的影响,研究了交联剂、分散剂、引发剂以及聚合温度等对树脂吸油倍率的影响。
6) saline solution absorption
吸盐水倍率
1.
Water absorption, saline solution absorption and breaking strength were improved by up to 35.
14％,吸盐水倍率最高可增加54。
补充资料：浓氯化钠注射液 ,高渗氯化钠注射液,高张氯化钠注射液
药物名称：浓氯化钠注射液
英文名：Injection 10% Sodium Chloride
别名：浓氯化钠注射液 ,高渗氯化钠注射液,高张氯化钠注射液
外文名： Injection 10% Sodium Chloride, Hypertonic saline
适应症： 用于脱水症及调节体内水与电解质的平衡。
用量用法： 静脉滴注，临用前稀释，用量与浓度视病情需要而定。
注意事项： 心、肾功能不全者慎用。
规格： 注射剂：１ｇ／１０ｍｌ，本品为氯化钠的高渗灭菌水溶液。
类别：调节水、电解质及酸碱平衡药
英文名：Injection 10% Sodium Chloride
别名：浓氯化钠注射液 ,高渗氯化钠注射液,高张氯化钠注射液
外文名： Injection 10% Sodium Chloride, Hypertonic saline
适应症： 用于脱水症及调节体内水与电解质的平衡。
用量用法： 静脉滴注，临用前稀释，用量与浓度视病情需要而定。
注意事项： 心、肾功能不全者慎用。
规格： 注射剂：１ｇ／１０ｍｌ，本品为氯化钠的高渗灭菌水溶液。
类别：调节水、电解质及酸碱平衡药
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条