1) engineering commissioning
工程调试
1.
The composition of dispatching operational sheet system in Mudanjiang Electric Power Bureau was introduced,particularly emphasizing on the power system model and its implementation method,including five-preventing ,that is safety function,set-upping simulation drawings of power grid and engineering commissioning.
介绍了牡丹江电业局调度操作票系统的构成,着重阐述了该系统的电力系统模型和实现方法,包括“五防”安全把关功能、电网模拟图形的建立和工程调试。
2.
The engineering commissioning of EAST is the charge of the magnetic coils for purpose of testing the performance of the device and the main parameters of its subsidiary system.
EAST工程调试实验是为了测试主机性能和主要分系统的关键参数而进行的磁体通电实验。
2) program debugging tool
程序调试工具
1.
This paper introduces to Z80 users a Z80 program debugging tool——-Program Z80DEBUG.
本文介绍了在 PC 机上开发的 Z80程序调试工具——Z80DEBUG 软件,并论述了总体目标设计,程序实现技术以及应用实例。
3) program debugging
程序调试
1.
The traditional ARM program debugging methods have some disadvantages,including simple functions,expensive price,bad performance and complicated implementation.
针对通常情况下ARM程序调试方法存在功能简单、实现复杂、调式性能不佳和价格昂贵等问题,论述了运用EDA设计原理构建一种基于ARM的可视化重构调试平台的实现方法,分析了重构调试平台的结构,阐述了重构调试平台进行程序调试的过程。
2.
Aiming at the limitation of the development and debugging of TMS320LF2407A application system,such as the difficulties in designing the PCB,resource wasting and programming the FLASH repeatedly,the program debugging methods based on the combination of internal FLASH and SARAM are put forward in this paper.
针对TMS320LF2407A应用系统开发调试中存在布线困难、资源浪费以及反复擦写等缺点,提出了基于内部FLASH与SARAM结合的程序调试方法,提高了资源利用率和开发效率。
4) remote debug
远程调试
1.
Research and Implementation of the Simulator Based Remote Debugging System;
基于模拟器远程调试系统的研究与实现
2.
Research and Implementation of Remote Debug Technology for ARM-Based Embedded System;
ARM调试系统主要包括调试器、协议转换器以及位于它们之间的远程调试协议。
5) debug process
调试过程
1.
The key points and procedures of the reliability management of debug process for military electronic equipment were discussed.
分析了电子装备调试试验与可靠性的关系,提出了对电子装备调试过程实施管理的工作要点和实施程序,总结了行之有效的管理方法。
2.
The automation test system of radio altimeter is developed and the working principle is introduced The structure and design method of the system′s hardware module are presented Finally the test software is discussed in detail The system has been used, and the automation test in debug process can be well realize
该系统现已投入运行 ,实现了无线高度表调试过程的自动化测试。
6) remote debugging
远程调试
1.
An approach adopting the technology of controlling by PC computer to implement embedded remote debugging is addressed in this paper.
为解决嵌入式系统不支持本地调试且开发周期较长的问题,提出了一种通过PC机控制嵌入式系统的远程调试方案;对嵌入式系统远程调试所采用的关键技术及其工作原理作了详细说明,介绍了调试器基本功能的实现过程;实践证明该设计方案较好地解决了嵌入式系统调试过程中受限于系统自身资源与空间的问题,缩短了系统开发周期,达到了设计要求。
2.
In this paper, we analyzed the principle of Gdbstub which is used for remote debugging Linux kernel, and presented the improvement methods for gdbstub.
分析了利用Gdbstub远程调试Linux内核的原理,提出了对Gdbstub的改进方法,首先实现了目标机上运行的程序在调试模式和正常运行模式之间的切换,其次,在Gdbstub中增加了测定程序段运行时间的功能。
3.
<Abstracts>An approach adopting the technology of inserting stub to implement embedded remote debugging is addressed in this paper.
为解决嵌入式系统不支持本地调试,且开发周期较长的问题,提出了一种采用软件插桩技术针对嵌入式系统的远程调试方案;对嵌入式系统远程调试所采用的关键技术及其工作原理作了详细说明,介绍了调试器基本功能的实现过程、交叉调试所用到的远程通信协议,最后重点剖析了调试器的设计与实现要点;实践证明该设计方案较好地解决了嵌入式系统调试过程中受限于系统自身资源与空间的问题,缩短了系统开发周期,达到设计要求。
补充资料：坦克维修工程车(见坦克保养工程车、坦克修理工程车)
坦克维修工程车(见坦克保养工程车、坦克修理工程车)
tank maintenance %26 repair vehicle
一““、、’v‘丈人1以gUflgCnengChe坦克维修工程车(:artk Inaintenane。%26repair vehicle)装有坦克维修设备、仪器、工具的技术保障车辆。见坦克保养工程车、坦克修理工程车。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条