1) roll shell
辊套
1.
Numerical simulation of temperature field in roll shell under twin-roll casting;
铸轧辊辊套断面温度场的数值模拟
2.
介绍了采用有限差分法并建立两个模型来求解铸轧中铸轧辊辊套温度场的方法和结果。
3.
Productivity is increased by using new material cast roll shell.
采用新材料铸轧辊辊套提高了带坯通过量,分析了影响板形的各种因素,解决了铸轧生产中的鼓包问题。
2) roller shell
辊套
1.
Influence of magnetoconductivity of roller shell on magnetic induction in roll casting zone;
辊套材料的导磁性对铸轧区磁感应强度的影响
2.
According to the actual working conditions of roller shell in the process of continuous roll-casting,simulating analysis for the temperature distribution of roller shell in the condition of periodic thermal shock is introduced.
根据连续铸轧过程中铸轧辊辊套的实际工况,对铸轧辊辊套在受到铸坯周期性热冲击情况下温度分布规律进行了仿真分析,得到了在考虑铸轧辊辊套与铸坯接触界面热导时,铸轧辊辊套在不同铸轧速度时的稳态温度分布规律。
3) roll sleeve
辊套
1.
Temperature field and thermal deformation of roll sleeve in twin-roll strip casting;
双辊薄带连铸用结晶辊套温度场及其热变形
2.
Development of Heavy Bimetallic Centrifugal Composite Roll Sleeve;
大型双金属离心复合辊套的研制
3.
The work roll sleeve material for melted steel powder reclaiming rolling mill has been developed,the melted steel powder is from 4 kinds of different chemical compositions of Cr-Mo-V series material.
开发了4种成分不同的Cr-Mo-V系炼钢粉尘回收轧机用工作辊辊套材料,通过临界点及连续转变曲线测定、热处理工艺筛选、深冷淬火试验以及显微组织与力学性能分析等确定了热轧辊辊套材料的最佳成分与热处理工艺。
4) Roller
[英]['rəʊlə(r)] [美]['rolɚ]
辊套
1.
Analysis for skin effect of heat transfer in the roller and the maximal casting velocity during two-roll casting;
双辊铸轧中辊套传热的集肤效应及最大铸轧速度
5) roll ring
辊套
1.
Development of Heavy Centrifugal Composite Roll Ring;
大型离心复合辊套的生产研制过程
2.
The cold and hot fatigue property of PCrNi3MoV roll ring after double quenching has been studied in this article,which described when the heating temperature is in the range of 500-700℃,it has higher plasticity,and when the room temperature is within 450 ℃,the roll ring has higher cold and hot fatigue lifetime.
研究了PCrN i3MoV辊套通过双液淬火后的冷热疲劳特性,指出,当加热温度在500~700℃范围时,PCrN i3MoV辊套具有较高塑性,在室温~450℃温度区间具有较高的冷热疲劳寿命。
6) roll sleeve
轧辊辊套
补充资料：辊辊
1.犹混混。形容苟且混世。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条