1) plate mill
中板轧机
1.
Design improvement on the upper WR balancing cylinder of plate mill;
中板轧机上工作辊平衡缸设计改进
2.
Reformation of main drive system of plate mill of Handan Iron and Steel Co.,Ltd .;
邯钢中板轧机主传动系统的改造
3.
The construction,force calculation and motor power calculation are described in the article for the hold-down system in plate mills.
论述中板轧机压下装置的组成及结构、力的计算、电机功率的计算。
2) Medium Plate Mill
中板轧机
1.
Prediction of Rolling Force for Medium Plate Mill by Artificial Neural Networks;
中板轧机轧制压力人工神经网络预报
2.
Application of large power DC drive unite in medium plate mill;
大功率直流传动装置在中板轧机上的应用
3.
The technology parameters of 3-high、4-high medium plate mill of Jinan Iron and Steel Group General Corporation have been measured.
对济钢三辊、四辊中板轧机的工艺参数进行测试,结果表明:压下规程应进一步改善;四辊轧机还有一定的设备潜力;三辊轧机采用横纵和纵横轧制方式代替角轧,双机轧制薄宽钢板和采用控轧控冷工艺是可行的;操作中应避免咬入时的冲击以减少设备事故;并采用轧制法分别测定了三辊、四辊轧机的刚度。
3) Plate Mill of Semi-Continuous Rolling
半连轧中板轧机
4) medium plate mill
中厚板轧机
1.
Application of Elman neural network to width spread prediction in medium plate mill;
Elman神经网络在中厚板轧机宽展预测中的应用
2.
Non-linearity of vertical vibration of medium plate mill
中厚板轧机垂直振动的非线性
3.
This paper presented optimum calculation method of the width variation in medium plate mill, based on the improved BP network Levenberg-Marquardt training rules.
利用Matlab人工神经网络工具箱,采用改进的BP网络Levenberg Marquardt训练规则优化计算中厚板轧机的宽展,通过对该网络隐含层神经元个数的调整,使收敛速度加快,提高了宽展的预测精度。
5) plate mill
中厚板轧机
1.
AGC system for 3500 mm plate mill in Shougang Group;
首钢3500mm中厚板轧机AGC基础自动化系统
2.
Plate tracking function for Shougang plate mill;
首钢中厚板轧机的轧件跟踪
3.
Control system of circulating water plant for plate mill's ACC device;
中厚板轧机轧后加速冷却装置循环水处理控制系统
6) heavy plate mill
中厚板轧机
1.
The three dimensional elastic contact multipole-BEM and the corresponding program are successfully used in solving the distributions of traction in the press down screw-pairs of 3500 heavy plate mill,which is a large scale computing subject.
运用三维弹性摩擦接触多极边界元对3500中厚板轧机压下螺纹副进行面力场的数值解析。
2.
The three-dimensional elastic contact multipole-BEM and the corresponding program are successfully used in solving the distributions of traction in the press down screw-pairs of 3500 heavy plate mill, which is a large scale computing subject.
将三维弹性摩擦接触多极边界元法及软件应用于3500中厚板轧机压下螺纹副三维面力场的大规模运算课题。
补充资料：3300mm中厚板轧机(上海第三钢铁厂)
3300mm中厚板轧机(上海第三钢铁厂)
3300mm中厚板轧机(上海第三钢铁厂)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条