1) high-sulfur crude oil
高硫油
1.
Aiming at the fact that crude oil storage equipment will be seriously corroded in high-sulfur crude oil,the composite anti-static anticorrosion coating is prepared using polyurethane as film-forming material and graphite powder as conducting medium.
针对高硫油对原油储存设备腐蚀严重的实际,选用聚氨酯树脂为成膜物质,石墨为导电介质制备抗静电防腐涂层,采用失重法研究了石墨含量、硫浓度、温度对涂层耐蚀性的影响。
2) sour
高硫
1.
Causes of pressure drop increasing too fast in hydrocracker beds with sour feedstock being processed, more severe equipment corrosion and impurity content increase in product were analyzed.
通过对加氢裂化装置在加工高硫原料过程中出现的裂化反应器床层压力降上升过快、设备腐蚀加重以及产品中杂质含量升高等问题进行分析研究 ,发现这些问题是由于脱丁烷塔操作不正常造成的 ,并提出了解决问题的办法 ,实际生产表明 ,这些方法很有成
2.
By using the hydotreating reactor which was added during the capacity expansion transform of the hydrocracker, inferior coker gas oil after filtration was hydrotreated with sour vacuum gas oil under high pressure to provide FCC feedstock, and FCC slurry was blended into the coker feedstock.
利用加氢裂化装置扩能改造时新增的一个反应器,对经过过滤的劣质焦化蜡油和高硫直馏蜡油进行高压加氢精制,为催化裂化装置提供原料,催化裂化油浆则掺入焦化原料中,形成延迟焦化-加氢裂化-催化裂化联合工艺技术。
3) high sulfur
高硫
1.
Design of atmospheric tower for refining crude oil with high sulfur and high acid value;
炼制高硫、高酸值原油常压塔的设计
2.
Abstract FH-40B is a high activity hydrofining catalyst developed by Fushun Research Institute of Petro- leum and Petrochemicals(FRIPP)for processing high sulfur light distillate feeds.
FH-40B加氢精制催化剂是抚顺石油化工研究院近年来针对加工高硫轻质馏分油而开发的新一代馏分油加氢精制催化剂。
4) HS alloy
高硫合金
1.
Through experiments and tryouts,HS alloy was used to make the sliding plate,the performance-price rate reaching 1:8,compared with the domestically made QSu-4-4-4.
经过实验与试用后,将滑板改用HS高硫合金材质,相对国产的QSn-4-4-4材料,性能价格比达到1:8,铜滑板使用寿命不足两个月,目前HS滑板的使用寿命可达半年以上。
5) high sulphur coal
高硫煤
1.
Parameter optimization of aggregate desulphurization process for high sulphur coal;
高硫煤团聚脱硫工艺参数优化
2.
Derivation and acqucisition of knowledge of expert system about feasibility for desulphurization of high sulphur coal;
高硫煤脱硫可行性专家系统知识的来源与获取
3.
Demineralization and desulphurization of high sulphur coal from YMSH and SBSH was investigated using aqueous sodium hydroxide followed by hydrochloric acid treatment Compared to the alkali and acid alone,successive treatments with the alkali and acid resulted in significant removal of mineral matters and sulphur from the coal.
对来自湖南YMS煤矿和贵州SBS煤矿的高硫煤进行脱硫和脱矿物的研究。
6) high-sulfur coal
高硫煤
1.
Desulfuration technique of high-sulfur coal from Chenghe mining area;
澄合高硫煤固硫技术初探
2.
Enrichment and geochemical origin of some trace elements in high-sulfur coal from Kaili,eastern Guizhou Province;
凯里高硫煤中某些微量元素的富集及成因分析
3.
The high-sulfur coal desulphurization by heavy medium cyclone,flotation machines and falcon centrifuge equipment are used in experiment.
分别采用重介旋流器、浮选机及Falcon离心机三种设备对滇东北地区高硫煤进行脱硫试验研究。
参考词条
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。