1) Microcellular polycarbonate foam
聚碳酸酯微孔泡沫塑料
2) polyisocyanurate foam
聚异氰脲酸酯泡沫塑料
3) urethane foam
聚氨基甲酸酯泡沫塑料
4) microcellular foam
微孔泡沫塑料
1.
The progress of research on preparing methods of microcellular PC foams was summarized, including batch microcellular foaming,continuous extrusion and mould pressing .
阐述了聚碳酸酯(PC)微孔泡沫塑料的制备方法,包括间歇成型法、连续挤出成型法、模压成型法;综述了PC纳米复合微孔泡沫塑料的制备;介绍了PC微孔泡沫塑料的拉伸性能、疲劳性能、时温效应及电性能;并提出了PC微孔泡沫塑料的应用前景和研究方向。
2.
Introduce the characteristics and application range of microcellular foams, analyse the technological study situation at home and abroad.
介绍了微孔泡沫塑料的特点及其应用,分析了国内外对微孔泡沫塑料的研究现状。
3.
Process and research progress of microcellular foam are reviewed.
综述了微孔泡沫塑料的生产方法 ,介绍了其研究进展。
5) microcellular foams
微孔泡沫塑料
1.
The aim of the introdution is to arouse the attention to this wildly applied and friendly environmental material,so as to promote further developments of microcellular foams.
介绍了微孔泡沫塑料的主要成型技术,详细阐述了连续挤出法的成型工艺及主要工艺条件对最终制品的影响。
2.
By now, the main technologies used to manufacture microcellular foams are periodic means, improved batch means, injection molding means, pressure molding means and continuous extrusive.
微孔泡沫塑料是一种新型的高分子材料，其泡孔直径小(1～10μm)，泡孔密度大(10~9～10~(12)个／cm~3)，泡孔分布均匀。
3.
Because the microcells can blunt the tips of the cracks existing in the material and can hold the cracks' extension under the stress, thus the microcellular foams have excellent mechanical properties.
微孔泡沫塑料是指泡孔直径1μm到10μm之间,泡孔密度10~9到10~(12)个/cm~3之间的发泡塑料。
6) microcellular foam plastics
微孔泡沫塑料
1.
Progress of process technologies,properties and foaming mechanism of microcellular foam plastics was introduced.
介绍了微孔泡沫塑料的性能、成型原理和成型技术的研究进
补充资料：零回弹泡沫塑料
分子式：
CAS号：
性质：回弹性很低的MDI基低硬度软质泡沫。密度<100kg/m3，抗撕、抗拉和压缩变定性能优良。低频率下(1.5kHz)空气阻尼性好，低温下不变硬，具有优良的吸能作用。用作汽车吸声、减振材料。
CAS号：
性质：回弹性很低的MDI基低硬度软质泡沫。密度<100kg/m3，抗撕、抗拉和压缩变定性能优良。低频率下(1.5kHz)空气阻尼性好，低温下不变硬，具有优良的吸能作用。用作汽车吸声、减振材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条