1) angle of arrival
撞击角度
2) impact
撞击
1.
Numerical study on the impact absorption behavior of compound tubes;
复合管撞击吸能特性的数值研究
2.
Failure behavior of laminated composite cylindrical shells under axial impact loading;
层合圆柱壳轴向撞击失效行为的试验研究
3.
Experiment Study on the Impacting Hurt Between RBC and Solid Surface;
红细胞-固面撞击损伤的实验研究
3) collision
撞击
1.
The elastic-plastic dynamic response of elastic foundation in collision;
弹性地基梁受撞击的弹塑性动力响应
2.
A spring between the ship and the structure is taken into account,and the moment separation between the moving ship and the structure during the collision can be predicted.
通过引入合理的撞击模型,建立了水面运动船只低速撞击埋置框架结构的传递矩阵-节点耦合矩阵动力分析模型。
4) crash
撞击
1.
The overall thought of application of the passive safety protection technology in the design and research of the crashworthiness of urban railcar sets is discussed.
探讨了运用被动安全防护技术实施城市轨道动车组耐撞击性能系统设计的总体思想,并以某城市轨道车辆部分低地板动车组为研究对象,采用非线性动态有限元技术,进行了耐撞击系统设计和结构撞击仿真分析。
2.
According to the structural specialties of passenger car designed for Iran,the design of the energy-absorbing structure was done in this paper,and the technical problems existing in structuctural design were solved,finally a numerical simulation of crashing was also done using the ANSYS/LS-DYNA3D.
针对出口伊朗客车的结构特点 ,进行吸能结构设计 ,解决了吸能结构设计中存在的技术问题 ,并利用ANSYS/LS -DYNA3D软件进行撞击数值模拟计
3.
Feng s novels reveal modern people s confused and impetuous mentality in the crash and mingling of traditional culture and modern civilization.
小说揭示出现代人在传统文化和现代文明撞击、交融中的困惑、浮躁的心态。
5) impinging streams
撞击流
1.
Wet process for flue gas desulfurization by absorption in impinging streams(Ⅰ):equipment design;
撞击流吸收器燃煤烟气湿法脱硫(Ⅰ)——装置设计
2.
Preparation of nanosized titania by reactionprecipitation in impinging streams;
撞击流反应-沉淀法制取纳米二氧化钛
3.
Features of Liquid-continuous impinging streams and their Applications in preparation of ultrafine powders;
液体连续相撞击流特性及其在超细粉体制备中的应用
6) impinging stream
撞击流
1.
Absorbents selection of flue gas desulphurization with impinging streams;
撞击流燃煤烟气湿法脱硫吸收剂的选择
2.
Research on preparation technology of high purity nano-sized magnesium hydroxide by impinging stream;
撞击流制备高纯纳米氢氧化镁技术研究
3.
Characteristics of pressure fluctuation in submerged circulative impinging stream reactor;
浸没循环撞击流反应器的压力脉动特性
参考词条
补充资料：Anglelapping角度研磨
angle lapping 的目的是为了测量junction的深度，所作的芯片前处理，这种采用光线干涉测量的方法就称之angle lapping。公式为xj=λ/2 nf即junction深度等于入射光波长的一半与干涉条纹数之乘积。但渐渐的随着vlsi组件的缩小，准确度及精密度都无法因应。如srp(spreading resistance prqbing)也是应用angle lapping的方法作前处理，采用的方法是以表面植入浓度与阻值的对应关系求出junction的深度，精确度远超过入射光干涉法。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。