1)  chelating polymer
螯合聚合物
2)  chelic polymer
螯合聚合物
3)  chelate polymer
螯合聚合物
4)  chelating
螯合
1.
Influence of the chelating treatment onperoxide bleaching of the triploid ofpolulus tomentosa pulp;
螯合处理对三倍体毛白杨纸浆过氧化氢漂白效果的影响
2.
From the point of ion exchange and chelating,the high adsorption selectivity was investigated by the peculary structure of amidoxime fiber(combined with crosslinking structure and the maximal conversion of cyano) and Au ion.
从离子交换和螯合吸附的角度,根据偕胺肟基纤维本身的交联结构和最大氰基转化特点以及金离子本身的结构特点对其高选择吸附性能进行了解析。
3.
A new L-phenylalanine resin (PSAcylPhe) was prepared by chloroacetylated polystyrene (PSAcylCl) instead of merrifield resin (PSCH2Cl) and applied for chelating Ni2+.
用氯乙酰化聚苯乙烯(Chloroacetylized Polystyrene,PS-Acyl-Cl)树脂替代氯甲基树脂与苯丙氨酸(Phenylalanine,Phe)反应制备了PS-Acyl-Phe型螯合树脂,并研究了该树脂在pH、螯合时间、Ni2+浓度等不同条件下对Ni2+的螯合性能,得到了Ni2+型介质的最佳螯合条件:Ni2+溶液浓度为0。
5)  chelate
螯合
1.
Optimized Preparation Conditions for Chelate of Auricularia Polysaccharides with Zn(Ⅱ) and IR Spectrum Analysis;
黑木耳多糖与Zn(Ⅱ)螯合物的制备工艺及红外光谱分析
2.
Preparation and bioactivity of Ca~(2+) chelate of hydrolysate by enzymolysis from the waste fish proteins;
鱼蛋白酶水解物的钙螯合修饰及其功能活性
3.
This chelating starch was used to chelate copper(Ⅱ) ion,then determining the concentration of the metal ion solution before and after chelating by atomic absorption spectrometry,and discussed the influence of the metal ion solution,chelating time and the added capacity of chelator.
以淀粉为原料,用其接枝丙烯酸甲酯,然后与二乙烯三胺反应,合成具有多个酰胺基和胺基的螯合淀粉(SMAEN)。
6)  chelation
螯合
1.
Synthesis of pyridine-2-carboxaldehyde modified chitosan and its chelation properties;
2-吡啶甲醛改性壳聚糖的合成及螯合性能的研究
2.
Pyridine-2-Carboxaldehyde Chitosan( PYCTS) with good chelation properties was synthesized from Chitosan(CTS)and pyridine-2-Carboxaldehyde.
以壳聚糖和2-吡啶甲醛为原料,合成了具有高螯合性能的2-吡啶甲醛缩壳聚糖(PYCTS)。
3.
To cope with this problem, a high temperature tolerable organoclay (XNORB) is synthesized with optimally selected quartered ammonium and by chelation.
目前采用传统方法制备的有机土在高温下容易分解失去功效 ,解析出来的表面活性剂会降低油包水乳化钻井液的电稳定性 ,通过优选季铵盐和采用螯合技术合成一种高温稳定的有机土XNORB。
参考词条
补充资料:螯合聚合物
分子式:
CAS号:

性质:又称高分子螯合物,螯型聚合物。螯合物是一种特殊络合物,指在络合物中一个分子可以提供多配位基团,形成螯型结构的络合物。如果提供多配位的分子是聚合物大分子时称为螯合物。这种能够提供多配位基团的聚合物称为聚合物螯合剂。螯合聚合物如果从来源划分有天然高分子螯合物,如血红素、辅酶A、维生素B12、叶绿素等,它们在医学和农业方面具有重要意义。使用更多的是合成螯合物。从配位体的结构分析,螯合结构可以作为高分子的侧基形式出现,也可以作为高分子的主链的组成部分,以前一种螯合物的种类较多。作为螯合物在配位基团中需要有配位原子存在,常见的配位原子是原子外层存在未成键孤对电子的第五族至第七族元素,如O,N,S,P,As,Se等。有时处在多电状态的π键也可以提供配位功能,如聚二茂铁螯合物。带有螯合基团的聚合物在与金属离子形成螯合物后,其物理化学性质为发生较大变化,如化学、力学、热学、电学、磁学等性质。高分子螯合物有的可以作为耐高温材料、半导体材料,有的可以作为化学反应的催化剂,特别是用于立体或光学专一性或选择性化学反应的许多催化剂是螯合聚合物。螯合聚合物还可以作为输送氧的载体、光敏树脂,聚合反应引发剂、光稳定剂、抗静电剂、黏合剂和表面活性剂等,用途较为广泛。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。