2) High Titanium Ferroalloy
高钛铁
1.
The situation of smelting high titanium ferroalloy in the laboratory is briefly introduced.
简述了实验室条件下用铝热法冶炼高钛铁(Ti>65%)的情况,讨论了影响钛回收率的主要素。
2.
At present producing of high titanium ferroalloy mainly.
高钛铁是一种用途较为广泛的特种铁合金,是冶炼铁基高温合金和优质不锈钢不可缺少的材料,尤其是在提高军用、航空等高级合金钢的质量方面有着不可取代的作用。
3.
At pressent, the major method of producing top-quality high titanium ferroalloy is remelting, however, this method is used waste titanium as raw materials and the production cost is relatively high, which restricts its extensive application.
高钛铁是指含钛量为65%～75%的钛铁合金,是一种用途较为广泛的特种铁合金。
3) high purity titanium
高纯钛
1.
At last this paper indicates that the combination of some methods is the best approach of obtaining high purity titanium,and the development of new methods is beneficial to reduction of complexity of process.
详细介绍了高纯钛的应用现状,并对高纯钛的主要生产方法——克劳尔法、碘化法、熔盐电解法、电子束熔炼精炼法等进行了综述,指出只有几种方法结合才能获得纯度要求非常高的高纯钛;研发新的制备方法,克服传统制备工艺的复杂性,提高生产效率,降低生产成本,是高纯钛制备研究的发展方向。
2.
In this paper,combined with thermodynamics and crystal growth theory,the high purity titanium is obtained by chemical vapor deposition process.
本文结合热力学和晶核长大理论,采用 CVD(Chemical Vapor Deposition)法实验提纯钛,并对实验过程的成核热力学因素进行了分析,研究不同温度下化学气相沉积高纯钛的动力学特征,以及不同的动力学控制机制下气相过饱和度和结晶温度对高纯钛的结晶行为的影响。
4) high titanium slag
高钛渣
1.
The high titanium slag smelted with pellet in electric furnace,titanium slag smelted in oxidizing-roasting closed electric furnace,titanium slag smelted in pre-reducing closed electric furnace,titanium slag smelted with ore fines in electric furnace and research and development of PUS slag are introduced in detail.
重点介绍了用攀枝花钛精矿球团冶炼高钛渣、氧化-密闭电炉冶炼高钛渣、预还原-密闭电炉冶炼高钛渣和粉矿直接入电炉冶炼高钛渣的小试、中试和半工业性试验结果,以及用攀枝花钛矿和云南钛矿制备高钛渣的对比试验结果。
2.
Taking 94% and 90% high titanium slag as the raw material respectively to produce crude TiCl4 through boiling chloridization process,the effects of two kinds of high titanium slag on boiling chloridization process was analyzed.
分别以94%品位高钛渣和90%品位高钛渣为原料,采用沸腾氯化工艺制备粗TiCl4,分析了两种品位高钛渣对沸腾氯化工艺的影响。
3.
开发出一种低温快速还原钛铁矿生产高钛渣的新工艺,该工艺将钛铁矿和碳质还原剂(如煤粉)粉体的粒度磨细到10μm左右时,可在600℃左右实现快速还原反应将铁还原出来,冷却后通过磁选分离方式得到高钛渣和铁粉。
5) high-titanium slag
高钛渣
1.
Through the experimental study on degradation of ortho-nitrophenol solution with high-titanium slag as photocatalytic materials, the effects of reaction time, oxidant H_2O_2, electric voltage and pH value of solutions on photacatalytic activity were investigated.
通过以高钛渣为光催化材料降解邻硝基酚溶液的实验,研究了反应时间、添加强氧化剂H2O2、外加电场、溶液 pH值对其光催化性能的影响。
6) blast furnace slag bearing titania
高炉钛渣
1.
Analysis of carbothermal reduction of TiO_2 and extraction of titanium carbonitride from the blast furnace slag bearing titania;
TiO_2碳热还原与高炉钛渣提取碳氮化钛分析
补充资料：7000kV的高钛渣冶炼电炉(锦州铁合金厂)
7000kV的高钛渣冶炼电炉(锦州铁合金厂)
7000kV高钛渣冶炼电炉(锦州铁合金厂)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条