1) function block
功能块
1.
The configuration and function block of fieldbus device;
现场总线仪表的功能块及其组态
2.
Paralleling IEC function blocks in distributed control systems;
分布式控制系统中IEC功能块的并行化策略
3.
Analysis on mode and parameter status of function block application process in foundation fieldbus based on high speed Ethernet;
基于高速以太网的基金会现场总线功能块应用进程模态分析
2) functional block
功能块
1.
A primary research in the computer-aided design of the functional blocks of the extrusion tooling for plastic profiles used for construction was made through the development of the software.
通过软件的开发 ,对建筑用塑料异型材挤出模中功能块的计算机辅助设计进行了初步的探索。
2.
Functional block structure is more complicated than the main profile and more difficult to be formed into the needed profile.
相对于型材主体来说,功能块结构比较复杂,准确成型较困难。
3.
The advances of WorldFIP FieldBus and the configures of distributed functional block are analyzed.
分析WorldFIP现场总线及其控制系统分布式功能块组态的特点,参考著名的TCPI/P协议族,提出了基于WorldFIP现场总线携带协议的分布式功能块通信协议模型-WIP协议,该协议族的设计实现了点对点、及广播式的信息传输,同时为了解决主控制站对从站灵活组态的问题,协议族中的功能块管理层协议层实现了总线设备功能块的组态、启动、停止和参数修改等功能,并在实际应用中得到验证。
3) function blocks
功能块
1.
Computer aided process planning method based on function blocks;
基于功能块的计算机辅助工艺规划方法
2.
Function Blocks (FBs) play important roles in interoperability, auto\|diagnose and control of intelligent instrument.
功能块是实现现场智能仪表互操作、自诊断和自适应功能的基础。
3.
The concept of the instantiation of fieldbus function blocks is proposed based on the characteristics of the foundation fieldbus function blocks.
首先介绍了基金会现场总线功能块的特点,在此基础上提出了功能块实例化的概念。
4) function module
功能块
1.
It also introduces the concept of function module and a new kind of coding way,crossover operator and mutational operator.
提出了功能块的概念,介绍了一种新的编码方式、交叉算子和突变算子。
2.
Thus this paper studies the control system of automatic silk screen printing machine based on function module of PLC,details the operational principle of the control system,expounds the process of serical communication between omron PLC and inverters from mitsub.
因此,本文研究了基于PLC功能块的自动丝网印花机控制系统,叙述了系统工作原理,阐述欧姆龙PLC和三菱变频器的串行通信的过程,着重研究基于功能块串行通讯程序的结构及其实现过程。
5) function block number
功能块块号
1.
The effect of function block number assignment on the result of logic calculation in logic configuration of distributed control system(DCS) is analyzed in this paper.
针对DCS逻辑组态中功能块块号分配对逻辑运算结果的影响,提出了合理分配功能块块号的方法及运用时序图法进行逻辑运算的过程,避免出现运算结果滞后及错误的逻辑运算结果的现象,这对有关的技术人员非常有帮助。
6) Functional Module
功能模块
1.
It was introduced that how programmable logic controller(PLC)and functional modules in control systems for precise extrusion equipment were applied to realize the control for precise extrusion.
介绍了在精密挤出成型设备控制系统中如何应用可编程序控制器 (PLC)及其各种功能模块 ,来实现精密挤出成型过程中的各种控制功能 ,并通过挤出过程中各种影响质量因素和对控制过程中的几个闭环控制系统的分析 ,来进一步说明如何实现真正意义上的精密挤出成型。
2.
Using mixed language programming technique, the present paper has designed and set up program package for data-processing of electromagnetic sounding of frequency domain, described basic functions of various functional modules and gave examples of applying this software package to actual data processing.
本文利用混合语言编程技术,设计编制了频率域电磁测深资料处理程序包,描述了程序各功能模块的基本功能,给出了利用该软件包对实际数据处理的例子。
3.
To meet the demand of the conversion of DC voltage ratio signals to ARINC 429 data signals,based on the simple analysis of I/O signal properties,signal conversion modules and implementation concepts of the functional modules are discussed.
在某大型系统中需要将直流电压比率信号变换为ARINC429数据信号,本文在简单分析输入输出信号特性的基础上,对信号变换的组成模块以及各功能模块的实现方案进行了论述。
补充资料:人脑的功能分化左右大脑半球的功能特化
李瑞端绘
[图]
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条