1) technology
[英][tek'nɔlədʒi] [美][tɛk'nɑlədʒɪ]
工艺方法
1.
Two methods were used to dry squid tub in hot-air drying technology.
采用热风干燥技术对鱿鱼胴体进行了2组不同工艺方法的试验研究,对2种试验结果进行了对比分析。
2.
A test system to test shear stress under different operating methods, different conditions and different technologies was constructed and reasonable effective operating method and technology were obtained.
采用一测试系统测量在不同的操作方法、不同的操作环境以及不同的工艺手段下的螺柱承受剪切力的能力 ,以此得到合理有效的操作和工艺方
2) technique
[英][tek'ni:k] [美][tɛk'nik]
工艺方法
1.
At the same time,it introduces the technology features,the technique and die design,and so on.
通过实例阐述了能有效降低损耗及温升的冲槽切气隙新工艺的优点,并对其工艺特点、工艺方法、模具设计等进行了介绍,很好地解决了转子车气隙工艺存在的缺点。
2.
By analysis of drawings,machining measures,this key problem is solved effectively through improving the requirement of valve seat size and machining techniques.
经过对产品图纸、现生产手段进行综合分析,通过改进气门座尺寸要求,改进加工工艺方法,有效地解决了这一关键质量问题。
3.
This paper introduces a new technique of one-off membrane making for copper tube of condenser, which can be done without many temporary systems.
介绍了对凝汽器铜管进行一次性造膜新的工艺方法 ,该方法不需要加装很多临时系统 ,按照造膜原理 ,在循环水管线加一加药管 ,连续向循环水中加药 ,药液与循环水混合后 ,在凝汽器和水塔水池之间循环 ,调整循环水的pH值和Fe2 + 离子浓度 ,使Fe2 + 离子逐渐沉积到铜管内壁 ,从而实现对凝汽器的成膜。
3) process
[英][prə'ses] [美][prə'sɛs]
工艺方法
1.
Study on Slow Wire Cutting Processes for Fine Pitch Gear;
小模数齿轮数控慢走丝线切割加工工艺方法的研究
2.
Gear shaving is a process of high-efficiency on the gear precision work,but the tooth profile error of gear shaving is a hot issue.
通过分析剃齿加工过程的动力学特性,阐述了剃齿加工齿形误差产生和传递的成因,提出了剃齿加工的齿形精度是受剃齿啮合时的接触点数、剃前齿形误差传递、剃前齿形误差复映等多种因素所影响的,探讨分析了消除和减少齿形误差的工艺方法,对进一步分析剃齿齿形误差、剃齿刀修形和研究分析剃齿工艺、提高齿轮加工质量具有一定的指导作用。
3.
The four processes in general use for recovering silver from silver nitrate solutions and them features are presented.
阐述分析了从硝酸银溶液中提取白银的4种常见工艺方法、特点及在生产应用中注意的问题。
4) technological method
工艺方法
1.
This paper introduces the technological method, technical characteristics and operation parameters of the units of desulfurization,dewatering and sulfur recoverying of imported 50×10~4m~3/d skidmounted natural gas purification equipment,discusses some technological problems and proposes some opinions.
本文介绍了50×10~4m~3/d引进撬装天然气净化装置脱硫、脱水及硫回收单元的工艺方法、技术特点及操作参数,并对某些工艺问题进行讨论,提出看法。
5) Processing method
工艺方法
1.
This paper is a historical review of propellant types and of processing methods that have been used in the USA in last 50 years.
回顾了近 50年来美国所用的推进剂类型及工艺方法 ,介绍了可浇铸和可挤压型推进剂 ,讨论了很多氧化剂 ,包括早期固体推进剂中所用的高氯酸钾直至现在所用的硝胺。
2.
Extrusion is a processing method for fine machining of hole with highefficiency.
挤压加工是孔精加工中高效率的工艺方法,它能大大提高孔的精度、粗糙度和耐磨性,特别是对大直径的深孔,具有良好的效果。
3.
According to the problems in the machining process and resolving measures, the concrete processing method of this kind of part is provided.
以某型零件中实际球面的加工为例,浅析了球面以车代磨的加工工艺方法,针对加工过程中所遇到的问题,介绍了该类零件的具体加工方法。
6) process method
工艺方法
1.
The concept,history and process features of the surface rolling strengthening technology for metal parts were introduced,the strengthening mechanism and different process methods of surface rolling technology were summarized,and future developing trends of the technology were prospected.
介绍了金属零件表面滚压强化技术的概念、历史和工艺特点,综述了表面滚压技术的强化机理和各种工艺方法,展望了该技术今后的发展趋势。
补充资料：古代绞缬工艺方法
古代绞缬工艺方法 大体分为四类：一、缝绞法：用针线穿缝与绞扎的办法来作防染加工。通过叠坯、缝绞、浸水、染色、整理五道工序完成。二、夹板法。织物被巧妙折叠之后，再用对称的几何小板块将其缚扎起来，经染色，可获得防白花纹。三、将坯绸用经向或对角折叠，在不同的位置上以织物自身打结抽紧，然后浸水染色即可。四、叠坯或不叠坯加以绑扎，以造成防白花纹。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条