1) Filler
[英]['fɪlə(r)] [美]['fɪlɚ]
填充剂
1.
Application of filler Austin Black in inner liner compound of TBR tire;
填充剂Austin Black在全钢载重子午线轮胎气密层胶中的应用
2.
Research on Filler Used for Package Resin;
封装树脂用填充剂的研究
3.
The viscosity of PVC paste became greater with increasing filler amount.
探讨了加入不同填充剂、温度及存放时间对PVC糊黏度的影响。
2) filling agent
填充剂
1.
The preparation techniques of protein filling agents have been summarized,and the prospects of the future research on them have been introduced.
对各类蛋白填充剂的制备方法进行了综述,并对未来蛋白填充剂的研究方向进行了展望。
2.
Modified feather keratin filling agent was prepared by hydro lyzing fea ther under alkaline condition and grafting with acrylic acid in redox system of potassium persulphate-sodium bisulfite.
在碱的催化下先将羽毛水解,然后在K2S2O8-NaHSO3氧化还原体系的引发下,用丙烯酸对羽毛水解物进行接枝改性,制备出了一种改性羽毛蛋白填充剂。
3.
It is introduced that how to use the waste residue and sludge of paper making with waste paper comprehensively, in this paper some practicable application technology was showed as follows: A technology, to prepare fibrous composite filling agent; technology B to prepare agglutinating porous bricks.
废纸造纸产生的污泥如何综合利用,通过研究开发和中试,有多项应用技术可供选择,其中主要有A项技术制备纤维复合填充剂,B项技术制备烧结多孔砖等墙体砌块材料的填料。
3) fillers
填充剂
1.
In this paper, the effects of curing agents, fillers, softeners and reclaimed RNBR on the properties of China-made hot NBR3604 were studied .
选择国产热法ＮＢＲ３６０４为原料，研究了硫化剂、填充剂、软化剂、再生ＮＢＲ等对其力学性能、耐油和耐溶剂性能的影响；并将ＮＢＲ３６０４与其它极性橡胶（氯丁橡胶、氟橡胶、丙烯酸酯橡胶）以及ＡＮ含量较低的ＮＢＲ进行了对比。
2.
The results showed that fractal dimension and the fillers had a close relation.
基于分形理论对新型粉末NBR-PVC互穿网络结构进行分析,提出用分形维数来定量描述共混界面的几何特征,结果发现:分形维数与填充剂类型有密切关系,当加入单甘酯后,分形维数越小,单甘酯对混合界面所起到的增容作用越好,两相界面之间越模糊,制品力学性能越好。
3.
Effects of different fillers,different plasticizers on the cover properties of light PVC conveyor belts were studied.
研究了不同填充剂、增塑剂对PVC轻型输送带覆盖胶性能的影响。
4) Diluent
[英]['diljuənt] [美]['dɪljuənt]
填充剂
1.
Effects of Solid Diluents on Activity of Beauverin bassiana Spores;
白僵菌填充剂对孢子活力的影响研究
2.
Screening of diluents and disintegrants of Xiao′er Qingrezhike dispersible tablets;
小儿清热止咳分散片的填充剂与崩解剂筛选
3.
It is shown that a certain quantity of antioxidative, oil—com patible and rust—proof additives and diluents, when added in grease, may result in excellent extreme pressure abrasion resistance.
结果表明,在润滑脂中加入适量的抗氧、油性、防锈添加剂,以及填充剂,可制得极压抗磨性很好的润滑脂。
5) bulking agent
填充剂填料
6) filler
[英]['fɪlə(r)] [美]['fɪlɚ]
填料;填充剂
补充资料：填充剂
分子式：
CAS号：
性质：又称填料、填充物。加入物料中改善性能或降低成本的固体物质。通常不含水，中性，不与物料组分起不良作用的有机物、无机物、金属或非金属粉末均可用作填充剂。常用的有高岭土、硅藻土、滑石粉、石墨、炭黑、氧化铝粉、玻璃粉、石棉粉、云母粉、石英粉、碳纤维、粉末状软木、金刚砂等。胶黏剂中加入填气剂，可降低成本、减小线膨胀系数和收缩率，增加导热性，提高胶层稳定性，增加耐热性和机械强度，改变胶液的流动性和调节黏度等。
CAS号：
性质：又称填料、填充物。加入物料中改善性能或降低成本的固体物质。通常不含水，中性，不与物料组分起不良作用的有机物、无机物、金属或非金属粉末均可用作填充剂。常用的有高岭土、硅藻土、滑石粉、石墨、炭黑、氧化铝粉、玻璃粉、石棉粉、云母粉、石英粉、碳纤维、粉末状软木、金刚砂等。胶黏剂中加入填气剂，可降低成本、减小线膨胀系数和收缩率，增加导热性，提高胶层稳定性，增加耐热性和机械强度，改变胶液的流动性和调节黏度等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条