3) medium plate mill
中厚板轧机
1.
Application of Elman neural network to width spread prediction in medium plate mill;
Elman神经网络在中厚板轧机宽展预测中的应用
2.
Non-linearity of vertical vibration of medium plate mill
中厚板轧机垂直振动的非线性
3.
This paper presented optimum calculation method of the width variation in medium plate mill, based on the improved BP network Levenberg-Marquardt training rules.
利用Matlab人工神经网络工具箱,采用改进的BP网络Levenberg Marquardt训练规则优化计算中厚板轧机的宽展,通过对该网络隐含层神经元个数的调整,使收敛速度加快,提高了宽展的预测精度。
4) plate mill
中厚板轧机
1.
AGC system for 3500 mm plate mill in Shougang Group;
首钢3500mm中厚板轧机AGC基础自动化系统
2.
Plate tracking function for Shougang plate mill;
首钢中厚板轧机的轧件跟踪
3.
Control system of circulating water plant for plate mill's ACC device;
中厚板轧机轧后加速冷却装置循环水处理控制系统
5) heavy plate mill
中厚板轧机
1.
The three dimensional elastic contact multipole-BEM and the corresponding program are successfully used in solving the distributions of traction in the press down screw-pairs of 3500 heavy plate mill,which is a large scale computing subject.
运用三维弹性摩擦接触多极边界元对3500中厚板轧机压下螺纹副进行面力场的数值解析。
2.
The three-dimensional elastic contact multipole-BEM and the corresponding program are successfully used in solving the distributions of traction in the press down screw-pairs of 3500 heavy plate mill, which is a large scale computing subject.
将三维弹性摩擦接触多极边界元法及软件应用于3500中厚板轧机压下螺纹副三维面力场的大规模运算课题。
6) Plate rolling
中厚板轧制
1.
Analysis of the head-end bending in plate rolling and “differential biting” control of it;
中厚板轧制板头弯曲原因分析与“差动咬人”控制法
2.
The temperature variation during plate rolling was simulated by using FEM.
采用有限元(FEM)程序模拟计算了中厚板轧制过程中的温度变化,得到与实测温度符合甚好的模拟结果。
3.
This paper introduces the variation of plan view during plate rolling, the principle and procedure of trimming-free plate production.
介绍了中厚板轧制平面形状的变化规律 ,阐述了勿需切边生产方法的原理、实施步骤及软件的开发。
补充资料：精轧孔型
精轧孔型
finishing pass
1 ingzho kongxing精轧孔型(finishing pass)使轧件断面面积减小的同时，还使轧件的断面形状与尺寸均接近于成品的孔型。精轧孔型又称预轧孔型，一般是指成品孔型之前的2一4个孔型。在轧制异形断面型材时，精轧孔型的数量较多。例如，轧制钢轨的轨形孔型、轧制槽钢的槽形孔型、轧制工字钢的工字形孔型等均为精轧孔型。轧制普通断面型材时，精轧孔型数量较少。例如，轧制圆钢时，成品孔之前的2一4个孔型为精轧孔型。它们或为方一椭圆孔型，或为椭圆一圆一椭圆孔型，或为椭圆一立椭圆一椭圆孔型，或为方一扁箱一立椭圆一椭圆孔型等。轧制方钢时，其精轧孔型或为箱形孔，或为椭圆一方一椭圆孔型，或为菱一方一菱形孔型，或为菱一菱孔型等。 (朱殿强)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条