1) zinc based alloy
锌基合金
1.
Study of new additive for zinc based alloy electroplating;
一种新型锌基合金电镀添加剂的研究
2.
The hot deformation behaviors of a self-developed zinc based alloy which could replace HPb59-1 brass used as structural pieces were investigated by means of the isothermal compression test.
采用热模拟试验机对一种自行研制的高强度易切削锌基合金进行了等温热压缩试验。
3.
Combining with silicone rubber moulding and precision casting technology, zinc based alloy mould for the plastic products was obtained.
模具材料使用锌基合金 ,模具制作周期短、成本低、质量好。
2) zinc-based alloy
锌基合金
1.
Prediction of HAZ tribological properties of fusion welded zinc-based alloy by means of artificial neural network;
基于人工神经网络的锌基合金熔化焊HAZ摩擦学性能预测
2.
Microstructure and properties of extruded profiles of zinc-based alloys;
锌基合金挤压型材的组织与性能
3.
Taking the molding mould for the saddle foamed plastic pads as an example, the casting technological process for the curve-surface cavity zinc-based alloy die was stated.
以鞍座泡沫塑料垫成型模为例 ,阐述了曲面型腔模具的锌基合金铸模工艺 ,同时将三维温度场电算技术在铸模过程模拟预测中进行了有效的应用。
3) zinc base alloy
锌基合金
1.
Effect of chemical composition on mechanical properties of zinc base alloy;
化学成分对锌基合金性能的影响
2.
On the basis of rapid prototype and analysis on cooling system optimization,zinc base alloy plaster casting method was applied to the manufacture of insert blocks of plastic mould with inner optional-laying cooling water channel.
现在快速样件和冷却系统优化分析的基础上,用锌基合金石膏型铸造的方法对内置任意布置冷却水道的塑料模具镶块进行了试制,取得了满意的效果。
3.
The laws of anomalous codeposition of zinc base alloy were summed up, the development and present situations of the anomalous codeposition mechanism were summarized briefly, and several new mechanisms were reviewed in detail.
总结了锌基合金异常共沉积的规律,概述了锌基合金异常共沉积机理研究的发展现状,对几种较新的机理进行了综合评述。
4) zinc-base alloy
锌基合金
1.
In this paper, the effects of rare earth on the structure and properties of zinc-base alloy are studied.
研究了稀土对锌基合金的组织、性能的影响。
5) zinc Alloy
锌基合金
1.
Development and Application of Zinc alloy Plating Technology;
电镀锌基合金工艺的发展及应用
2.
The corrosion resistance in neutral and acidic media of the zinc alloy layer is determined.
在热镀锌镀液 (纯Zn、Zn <0 1 %Al、Zn <0 1 %Ni)中添加微量稀土元素 ,对其所形成的锌基合金层在中性及酸性介质中的耐腐蚀性进行了测定。
6) zinc alloy mould
锌基合金模
1.
The article explains the manufacture and application of the zinc alloy mould from the characteristic of zinc.
从锌基合金模的特点出发,阐述了锌基合金模的研制以及应用情况。
补充资料：锌基合金阳极
分子式：
CAS号：
性质：防腐用语。锌中加入少量铝、镉、锰等形成合金，能消除铁的有害作用，并提高锌合金中铁的临界含量的牺牲阳极。目前应用广泛的是Zn-A1-Cd系三元锌基合金牺牲阳极。它具有溶解性能好、电流效率高、价廉、加工容易等特点。特别是对油轮舱内钢的保护时，由于它与钢结构撞击时不会产生火花，所以很安全，是惟一能在此情况下使用的牺牲阳极。
CAS号：
性质：防腐用语。锌中加入少量铝、镉、锰等形成合金，能消除铁的有害作用，并提高锌合金中铁的临界含量的牺牲阳极。目前应用广泛的是Zn-A1-Cd系三元锌基合金牺牲阳极。它具有溶解性能好、电流效率高、价廉、加工容易等特点。特别是对油轮舱内钢的保护时，由于它与钢结构撞击时不会产生火花，所以很安全，是惟一能在此情况下使用的牺牲阳极。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条