1) nickel-coated carbon fiber
镀镍碳纤维
1.
ABS composites filled with nickel-coated carbon fibers were prepared by heat compression molding method,and the effects of fiber length and content on their electromagnetic shielding properties were analyzed.
采用热压工艺制备了镀镍碳纤维(CF)增强(丙烯腈/丁二烯/苯乙烯)共聚物(ABS)复合材料,研究了CF长度及含量对其电磁屏蔽特性的影响。
2.
In this paper,the preparation method and shielding effectiveness(SE)of PC/ABS composite engi- neering plastics with nickel-coated carbon fiber(NCF)are researched.
研究了镀镍碳纤维(NCF)增强工程塑料(PC/ABS)的制备和影响其屏蔽效能的因素。
2) electrolessly nickel-plated carbon fiber
化学镀镍碳纤维
1.
The relation between the phosphorus content of the nickel coat on electrolessly nickel-plated carbon fiber (CF/Ni-P) and its microstructure and electromagnetic properties in acidic and alkaline plating liquids is studied.
研究了在酸性和碱性镀液中,化学镀镍碳纤维(CF/Ni-P)的镀层含磷量与其微结构及电磁性能的关系。
3) Al film on carbon fiber
镀铝碳纤维
4) metal coated carbon fiber
镀膜碳纤维
1.
Cement specimens containing carbon fibers and metal coated carbon fibers of different composition and length were made, tested and analyzed.
研究了水泥中分别加入碳纤维和镀膜碳纤维所制成的导电复合材料在不同载荷下的导电性能 ,探索其用于智能水泥的可能性 。
5) copper-coated carbon fiber
镀铜碳纤维
1.
Two-step sintering process was adopted to prepare fiber/NiFe2O4 composite ceramic inert anodes with copper-coated carbon fiber by solid-state reaction.
以高温固相合成法,采用两步烧结法制备镀铜碳纤维增强的纤维/NiFe2O4复合陶瓷惰性阳极,即先以NiO、Fe2O3、微量V2O5和MnO2为原料制备NiFe2O4尖晶石基体材料,然后以该NiFe2O4尖晶石基体材料和镀铜碳纤维为原料,采用冷压烧结法制备纤维/NiFe2O4复合陶瓷惰性阳极。
6) electro-copper plating of carbon fibers
碳纤维电镀铜
补充资料：碳纤维上浆剂
分子式：
CAS号：
性质：指碳纤维经表面处理后进行的上胶剂处理，又称碳纤维上浆剂。其作用是保护碳纤维表面处理(特别是臭氧处理或等离子体处理)后产生的表面活性，有利于改善与树脂母体的黏合力及后加工性能，防止毛丝的产生。上胶剂的种类有聚酰胺类和环氧树脂类等。以聚α-(N,N-二甲胺)-己内酰胺或其共聚物为例，碳纤维经涂覆该上浆剂后，复合材料强度由未上胶前的16.66GPa提高至23.52GPa。
CAS号：
性质：指碳纤维经表面处理后进行的上胶剂处理，又称碳纤维上浆剂。其作用是保护碳纤维表面处理(特别是臭氧处理或等离子体处理)后产生的表面活性，有利于改善与树脂母体的黏合力及后加工性能，防止毛丝的产生。上胶剂的种类有聚酰胺类和环氧树脂类等。以聚α-(N,N-二甲胺)-己内酰胺或其共聚物为例，碳纤维经涂覆该上浆剂后，复合材料强度由未上胶前的16.66GPa提高至23.52GPa。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条