1) temperature resistance
耐温性
1.
The viscosities which change with the temperature,the transmittancy and the temperature resistance of the samples were studied.
采用环氧氯丙烷作为交联剂,对纤维素原料和羧甲基纤维素(CMC)成品进行交联改性,采用两种不同的反应途径制备交联改性的CMC产品,通过对各自产品粘度随温度的变化以及透光度、耐温性的研究,发现先羧甲基化后交联的产品的性能更为优异。
2.
The temperature resistance of 10 kinds of domestic and overseas fluid loss additives is systematically researched by use of DTA and inherent viscosity of additives in aqueous solution after aging.
采用差热分析法和水溶液密封老化后的特性粘度法，全面系统地研究了国内外十种降滤失剂的耐温性。
3.
There mainly analyzed the test that required by GB as temperature resistance,the test of flame under oxide pressure,the test of leakage safety machine,the test of rubber materials and the test of metal materials.
重点对国家标准要求的耐温性试验、氧气压力激燃试验、安全泄放装置试验、橡胶材料试验及金属材料试验等项目进行了分析和讨论。
2) heat resistance
耐温性
1.
The crosslinking of HPG fracturing fluid by CZB-03 (an organic borate+zirconate crosslinker composed of organic zirconate crosslinker OZ-1 treated by a mixed adsorption inhibitor and of organic borate crosslinker OB-200 in equal mass ratio) and the heat resistance of and the damage caused by the gelled fluid are studied experimentally with 0.
实验研究了有机硼锆交联剂CZB 0 3(有机锆交联剂OZ 1用一种复合吸附抑制剂处理后与等质量的有机硼交联剂OB 2 0 0的复配物 )与HPG的交联性能、冻胶耐温性和伤害性 ,实验体系为加有 0 。
2.
6%(by wt),it has no obvious effect on the paper breaking length,tearing index and endurance times but with the increase of the dosage of reversible thermochromatic material the breaking length decreased obviously but the tear index and endurance times changed little;reversible thermochromatic paper had a higher pressure resistance and heat resistance.
6%时,其对纸张裂断长、撕裂指数和耐折次数影响均较小,但随着其用量的继续增加,裂断长明显降低,撕裂指数和耐折次数没有发生显著变化;可逆温致变色纸张具有较高的耐压性和耐温性。
3) temperature tolerance
耐温性
1.
Although much attention has been focused on the development of water absorptivity polymeric resin for loss circulation plugging during drilling operation, the corresponding inspecting standard of temperature tolerance of this novel material hasn’t been established.
虽然聚合物树脂类堵漏剂的研究和开发引起了广泛关注,但其检验标准特别是耐温性的检验方法尚未完全确立。
4) thermal resistance
耐温性
5) Thermal Stability
耐温性
6) temperature and salt tolerance
耐温耐盐性
补充资料：耐温变性
分子式：
CAS号：
性质：指涂膜经受高温和低温急速变化情况时，抵抗被破坏的能力。是检验涂膜在骤冷骤热情况下，由于涂膜机械强度变化而引起的开裂、起泡、脱皮等破坏现象。通常在高温如60℃保持一定时间后，再在低温如-20℃放置一定时间，经过若干次循环，最后观察涂膜变化情况。具体的温度、放置时间、循环次数等，应根据产品标准予以规定。
CAS号：
性质：指涂膜经受高温和低温急速变化情况时，抵抗被破坏的能力。是检验涂膜在骤冷骤热情况下，由于涂膜机械强度变化而引起的开裂、起泡、脱皮等破坏现象。通常在高温如60℃保持一定时间后，再在低温如-20℃放置一定时间，经过若干次循环，最后观察涂膜变化情况。具体的温度、放置时间、循环次数等，应根据产品标准予以规定。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条