1) nano-carbon black
纳米炭黑
1.
Structure and properties of nano-carbon black filled Lyocell-based carbon fiber;
纳米炭黑填充Lyocell基碳纤维的结构与性能
2.
Structure and properties of nano-carbon black filled Lyocell fiber;
纳米炭黑填充的Lyocell纤维的结构与性能
3.
The effect of nano-carbon black on the rheological behavior of cellulose/NMMO·H2O solution and structure and properties of Lyocell fibers were investigated.
研究了纳米炭黑添加剂对纤维素/NMMO·H2O溶液流变行为及Lyocell纤维结构与性能的影响。
2) nano carbon black
纳米炭黑
1.
Study on electrical and electrothermal properties of nano carbon black cement mortar;
纳米炭黑水泥砂浆的导电性与电热特性研究
2.
Modified nano carbon black reinforced butadiene-styrene latex and its application in tire repair liquid
改性纳米炭黑增强丁苯胶乳及其在轮胎修补液中的应用
3.
In this paper,to make full use the merit of cheapness and good dispersivity for nano carbon black,by adding nano carbon black in the carbon fiber concretes to improve its electrical conductivity properties.
采用在碳纤维混凝土中加入纳米炭黑来改善其导电性能,充分利用了纳米炭黑价格低廉分散性好的优点。
3) carbon black nanoparticle
纳米炭黑
1.
Oil-soluble carbon black nanoparticles were synthesized by surface graft modification.
通过表面接枝改性获得了亲油性的纳米炭黑粒子,扫描探针显微镜(SPM)和透射电镜(TEM)测试结果表明:炭黑粒子的尺寸为24~300nm。
2.
In ultrasonic field,nanocomposite coating was got by adding oil-soluble carbon black nanoparticles synthesized by surface graft modification into paint.
在超声场作用下,将接枝改性及缩醛化反应制备的油溶性纳米炭黑粒子(24nm~300nm)加入到普通油漆中,获得了纳米炭黑复合涂料。
4) nanometer carbon black
纳米炭黑
1.
Nanometer carbon black-phenolic resin composite binders were prepared by dispersing evenly various amounts of nanometer carbon black N220 in phenolic resin by adding KH-550 coupling agent and high-speed mixing.
采用加KH-550偶联剂和高速搅拌的方法,将不同量的纳米炭黑N220均匀分散在酚醛树脂中,制成纳米炭黑-酚醛树脂复合结合剂,研究了纳米炭黑含量对复合结合剂黏度及其经1500℃炭化后碳结构的影响,并采用这些复合结合剂制备了w(C)=3%的低碳镁碳试样。
5) nano-silica
纳米白炭黑
1.
The optimum technological conditions for synchronous preparation of nano-silica and active carbon from carbon rice husk were researched and the main factors for improvement of product quality were discussed.
研究了由稻壳同时制备纳米白炭黑和活性炭的最佳工艺条件,并对提高产品质量的主要因素作了初步探讨。
2.
In this paper,the effect of system reaction temperature and time to the preparation of nano-silica has been studied by the experiment of TEM,XRD and EDS.
利用透射电镜(TEM)、X射线衍射仪(XRD)和能谱仪(EDS)等分析方法研究了硫酸沉淀法制备纳米白炭黑过程中体系反应温度和溶胶制备反应时间对制备过程的影响。
3.
The effect of the modified nano-silica on the neoprene is investigated, the amount of coupling agent and modification conditions are also optimized.
研究纳米白炭黑经硅烷偶联剂(Si-75)湿法改性后对氯丁橡胶抗疲劳性能的影响,并对改性剂的用量、改性工艺条件进行了优化。
6) nano-grafted carbon black
纳米接枝炭黑
补充资料：低滞后炭黑
分子式：
CAS号：
性质：亦称低着色残差炭黑(low hysteresis carbon black)，是国外20世纪80年代中期开发的一个炭黑新品种。它的结构较高，加工性能好，炭黑聚集体直径分布宽。用于轮胎可以赋予胶料较低的生热性、低滚动阻力和良好的耐磨性，是节能降耗的优良品种。其生产方法一般采用梯级式反应炉，两级喷油：一级是通过轴向伸入的探管，由里向外；另一级是通过喉管喷油点由外向里，由此而生成低滞后炭黑。
CAS号：
性质：亦称低着色残差炭黑(low hysteresis carbon black)，是国外20世纪80年代中期开发的一个炭黑新品种。它的结构较高，加工性能好，炭黑聚集体直径分布宽。用于轮胎可以赋予胶料较低的生热性、低滚动阻力和良好的耐磨性，是节能降耗的优良品种。其生产方法一般采用梯级式反应炉，两级喷油：一级是通过轴向伸入的探管，由里向外；另一级是通过喉管喷油点由外向里，由此而生成低滞后炭黑。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条