1) aluminized coating
渗Al涂层
1.
The aluminized coating on the surface of gas turbine blade was prepared by using slurry process.
采用无机盐料浆法在涡轮发动机叶片材料表面制备渗Al涂层试样,对其进行1 000℃,200 h高温氧化性能试验,利用扫描电镜和光镜对氧化后的涂层表面形态进行了观察,并绘制了氧化动力学曲线和拟合氧化动力学方程。
2.
The aluminized coating on the surface of K4104 superalloy were prepared by using slurry process.
结果表明,渗Al涂层在氧化过程中已转变成连续致密的-αAl2O3氧化层和富铝的-βNiAl化合物层,使基体合金得到有效地保护,渗Al涂层具有良好的抗高温氧化性能。
3.
By adopting a slurry process an aluminized coating is formed on the high-temperature nickel-base alloy surface of blade material K4104.
采用料浆法在涡轮叶片材料K4104镍基高温合金表面制备渗Al涂层,利用静态高温氧化以及多种物理测试方法研究了渗Al涂层的防护性能。
2) Al-Si coatings
渗Al-Si涂层
1.
High temperature oxidation properties of Al-Si coatings on a DZ4 supperalloy;
DZ4合金渗Al-Si涂层抗高温氧化机理研究
3) Al-Si coating
Al-Si涂层
1.
Research on corrosion resistance of an Al-Si coating on a K4104 high-temperature alloy;
K4104高温合金Al-Si涂层耐腐蚀性能研究
2.
Al-Si coatings were prepared on the superalloy K4104 by the slurry process.
用无机盐料浆法在K4104镍基高温合金表面制备了渗Al-Si涂层。
3.
Al-Si coating were prepared on nickel-base superalloy ЖС6У by molten slurry process.
用熔烧型料浆法在镍基高温合金ЖС6У表面制备了Al-Si涂层。
4) Al/Ni coating
Al/Ni涂层
5) Fe-Al coating
Fe-Al涂层
1.
Al/Ni coating and Fe-Al coating using for the bonding coaling were obtained by plasma spraying.
用等离子喷涂技术制备了用作粘结底层的Al/Ni、Fe-Al涂层,研究对比了这两种涂层在锌液中的耐腐蚀性能。
2.
Results show that with the increasing of temperature,the corrosion rate of all Fe-Al coatings also increased,the corrosion resistance of the Fe-Al coating with addition of Cr3C2 is superior to those without or with addition of WC.
结果表明:随温度升高,4种Fe-Al涂层的腐蚀增重都增加,添加Cr3C2比添加WC或不添加任何增强的Fe-Al涂层有更高的耐腐蚀性。
6) Al-Si coatings
Al-Si涂层
1.
The Al-Si coatings on the surface of DZ4 superalloy were re-prepared by using slurry process.
用料浆法在DZ4镍基高温合金表面"二次"制备Al-Si涂层,依据GB/T13303-91对DZ4合金料浆渗铝硅试样进行1 100℃×300 h抗高温氧化实验。
补充资料：渗渗
1.寒冷貌。 2.指因害怕而产生发冷的感觉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条