1) roller
[英]['rəʊlə(r)] [美]['rolɚ]
托辊
1.
Experimental study on CP-DMCI supporting roller;
CP-DMCI托辊的试验研究
2.
Analysis on the reliability of roller in belt conveyor;
胶带机中托辊的可靠性分析
3.
Experimental study on the new-style roller tube of belt conveyer
带式输送机新型托辊管体试验研究
2) idler
[英]['aɪdlə(r)] [美]['aɪdlɚ]
托辊
1.
Two-end machining boring machine specially designed for belt conveyor idler body;
带式输送机托辊辊体专用双面镗床的设计
2.
Determination middle idler s best length for 3-idler belt conveyer;
3托辊组带式输送机中间托辊最佳长度探讨
3.
Design of test instrument of resistance parameters and running adaptation of conveyor idler:Mechanical drive system of the test instrument;
输送机托辊阻力及跑合试验综合性能测试仪的设计(上)——测试仪机械传动系统
3) carrier roller
托辊
1.
In view of the concentricity problems of the hole throats on both ends of the carrier roller, the drawing marking principles are discussed; Technical analysis is made for different marking forms and the corresponding process and testing methods are put forward.
针对托辊两端孔颈同轴度问题,讨论托辊部件两端孔同轴度的图样标注原则。
2.
The reaction force on belt and the load on carrier rollers under the conditions of clamped and simply supported edges are expressed respectively.
建立了带托板带式输送机皮带的力学模型 ,导出反映托板位置与托板接触反力和辊上压力关系的方程 ,以及固支边界模型和简支边界模型下皮带反力和托辊压力的表达式。
4) supporting roller
托辊
1.
Working out technology and controlling the quality on supporting roller of belt conveyor;
带式输送机托辊的工艺制定与质量控制
2.
Theoretical analysis of deviation prevention for rubber belt by the slotted supporting roller with an angle of lead dip;
前倾槽形托辊胶带防偏的机理分析
3.
A kind of dumbbell typed entirety supporting roller used for supporting the carrying belt and the wind leaf bucket-dustpan typed accumulated material mopping up device employed in sweeping up the accumulated material in the tail section we.
借鉴消化国外输送机械新技术,创新设计出具有全封闭式结构、拆卸性结构及全程底板耐磨设计特点的带式输送机;用于支承输送带的一种哑铃型整体式托辊,及用于自动清扫尾段积料的风叶畚斗式积料清扫器为其专有技术,这些结构及技术保证了带式输送机整机性能优良,输送量高、带速快,高效节能。
5) Support roller
托辊
1.
Improvement for support roller of push－ guide with tilting device;
推床带翻钢机的托辊改造
2.
This article discussed the hardware and software test system constituting and work processed of the tested system of the support roller.
文章论述了托辊阻力参数测试系统的组成以及工作过程,介绍了系统电气电路和测试仪软件系统及数据处理应用程序的设计。
3.
Discussed the hardware test system constituting and work processed of the testing system of the support roller.
论述了托辊阻力参数硬件测试系统的组成及工作过程,进行了系统硬件的电气原理电路的设计和测试软件系统及数据处理应用程序的设计。
6) roller axes
托辊轴
1.
A study on the fracture was conducted by means of fracture analysis,metallographic examination and hardness testing,The results showed that the unapt quenching technics brings on bad quenching of roller surface and asymmetric quenching layer resulting in the final fracrure of the roller axes.
通过对托辊轴的断口形貌、显微组织、硬度等进行试验分析,结果表明,托辊轴表面淬火工艺选择不当,导致轴身表面淬火不良及淬硬层不均匀是导致托辊轴最终断裂的主要原因。
补充资料：辊辊
1.犹混混。形容苟且混世。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条