1) guide rail
导轨
1.
Resumption of up and down guide rail precision of double end face grinder;
双端面磨床磨头导轨精度的恢复
2.
Analyses and Determination of Installation Position of Movable Guide Rail and Fabric Bar on GA731 Rapier Loom;
GA731型剑杆织机活动导轨和托布板安装位置的分析与确定
2) guide
[英][ɡaɪd] [美][gaɪd]
导轨
1.
The study to research machine tool guide crawl appearance;
机床导轨爬行现象的研究
2.
Failure Analysis and Maintenance Skills for CNC Milling Machine Tool Guides;
数控铣床导轨故障分析与维修技巧
3.
This essay presents an innovative guide moving device which is easymaking and lowcost, and it is easy for operating and repairing.
介绍了一种具有经济实用性的滑动导轨行走装置 ,该装置具有制造简单、成本低廉、维护使用方便、运行精度高等特点 ,对该装置稍加改进 ,即可实现圆柱形 ,螺旋形等运动 ,达到一机多用的功
3) Guideway
['ɡaidwei]
导轨
1.
A Method for Measuring Straightness Error of the Guideway of Machine Tool;
一种测量机床导轨直线度误差的方法
2.
Counter Measures on Stick-slip Fault of Guideways for Machine Tools;
机床导轨爬行故障的对策措施
3.
Design of Bed Guideway Lubrication System for Portal Planer;
龙门刨床床身导轨润滑系统的设计
4) rail
[英][reɪl] [美][rel]
导轨
1.
Application of rail-mounted scaffolds in constructing high-rise;
浅析导轨式爬架在高层建筑施工中的应用
2.
A new method that studies the rail inductance gradient during the launch is presented.
为研究电磁轨道发射试验过程的导轨电感梯度,本文首先利用Matlab时频工具箱对发射试验的电流信号进行处理,得到了发射过程中电流的时频曲线;同时通过Ansoft建模仿真得到了不同频率下的导轨电感梯度值;进而得到实际发射过程中对应于不同时刻的导轨电感梯度值。
3.
In this paper,the feasibility of the electromagnetic launch technology of unmanned aerial vehicle is researched by principle analysis and the rail launching kinematics.
通过原理性分析以及导轨起飞运动学分析,对无人机电磁弹射技术进行了可行性研究。
5) Slideway
['slaidwei]
导轨
1.
Research on Stick-slip Motion Mechanism of Machine Tool Slideway;
机床导轨爬行现象的产生机理研究
2.
Research of Plastic-iron Slideway Applied for CNC Machine Tools;
贴塑导轨在数控机床上的应用研究
3.
Straightness error measurement of a slideway based on position sensitive detector
基于PSD的导轨直线度测量
6) guide track
导轨
1.
This paper deal with the equations about maximum pressure on closed-circuit guide track in machine tool.
本文推导出了机床闭式导轨面上最大压强的计算公式,该公式适用于任何可能的压板间隙,具有通用性。
2.
This device uses the guardrails as the guide track.
新型高速公路护栏清洗装置结合护栏的结构特点而设计,以护栏本身为导轨。
补充资料：导轨磨床
| |||||||
主要参数内容 | 国际先进 | 国内先进 | 国内一般 | 国内落后 | 评定方法及说明 | ||
（一）加工精度（mm） | 参照GB5288-84、ISO4703-1984 | ||||||
试件装夹总长度 | |||||||
1、2000mm | ＜0.01 | 0.01 | 0.01 | ＞0.01 | |||
2、2000~5000mm | ＜0.015 | 0.015 | 0.015 | ＞0.015 | |||
3、5000~8000mm | ＜0.02 | 0.02 | 0.02 | ＞0.02 | |||
4、8000mm以上 | ＜0.025 | 0.025 | 0.025 | ＞0.025 | |||
（二）自动化程度 | |||||||
数控装置 | 有 | 有 | 无 | 无 | |||
（三）噪声dB（A） | ≤80 | 80~81 | 82~83 | ＞83 | |||
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条