1) wear resistance
耐磨
1.
Anti-friction and Wear Resistance Mechanism of FeS Layer;
FeS层的减摩耐磨机理
2.
The mechanism of wear resistance and reduction of metal ceramic coatings prepared by in-situ fabrication through laser cladding on the surface of oil well pump plunger;
激光合成金属陶瓷抽油泵柱塞耐磨减磨机理
3.
The thermal stability,thermal fatigue resistance,erosion resistance to aluminum liquid and thermal wear resistance of the new-developed high wear-resistant cast hot-working die steel were evaluated,their properties were compared with commercial H13 steel.
研制了一种高耐磨精铸热作模具钢,分析了其热稳定性、热疲劳性能、耐铝热熔损性能和热磨损性,并与H13钢进行了对比。
2) wear-resistance
耐磨
1.
Application on new nitriding coating technology of tube's corrosion-resistanceand wear-resistance;
油管耐磨抗蚀氮化新工艺与应用
2.
Study of wear-resistance of chemical plating on the surface of 65Mn steel;
65Mn钢表面化学镀耐磨研究
3.
So we have to improve the wear-resistance of the rotor by hard anodic oxidation.
在纺纱过程中,转杯处于高速旋转状态,纤维的摩擦、负压气流的冲刷以及部分杂质的侵蚀和人为的清洁工作,均能造成转杯内壁和凝棉槽表面的磨损,因此为提高转杯的耐磨性须对其进行硬质阳极氧化处理。
3) abrasion resistance
耐磨
1.
Testing results showed that the coat was excellent in abrasion resistance, stain resistance and slip resistance.
结果表明涂层在耐磨、耐污和防滑性方面表现优异。
2.
Comparing with ordinary rubber sole, PU sole is light in weight with better abrasion resistance.
聚氨酯鞋底与普通橡胶鞋底相比,它具有质量轻、耐磨性能好等特点。
3.
In this article through the inspection of imported cyclone separators, the author discussed the examining methods of cyclones, analyzed the mechanics of abrasion resistance and cracking of the hard surfacing.
通过对进口旋风分离器的检验 ,探讨了旋风分离器的检验方法 ,对表面硬化层耐磨和开裂的机理进行了一些探讨 ,为了研究旋风分离器堆焊层表面裂纹的扩展情况 ,制作了裂纹对比试块 ,利用端点回波法测量了堆焊层裂纹自身高度 ,为利用超声波探伤仪测量裂纹深度提供了有效方
4) wear-resisting
耐磨
1.
Study on Oxide-alumine Porcelain of Low-temperature Wear-resisting Ueing High-alumina Clay;
利用高铝矾土研制低温耐磨氧化铝瓷
2.
Welding of wear-resisting steel Hardox400;
Hardox400耐磨钢的焊接
5) wear-resistant
耐磨
1.
Application of wear-resistant and lubricating coating for wood cutting tools;
润滑耐磨功能涂料在木工刀具上的应用
2.
The wear-resistant material with best composition and overlay welding process were successfully developed,and the productiviting and the economic benefit were obviously improved.
通过对碎煤齿环的失效分析 ,找出了影响齿环寿命的因素及薄弱环节 ,并研制成功了最优成分的耐磨材料和堆焊工艺 ,显著提高了生产率和企业的经济效
6) wear
[英][weə(r)] [美][wɛr]
耐磨
1.
Development of wear resisting surfacing electrode with high efficiency,high hardness and low cost;
高效高硬度低成本耐磨堆焊焊条的研制
2.
A wear brazing coating was fabriacated through high temperature brazing in vacuum furnace after the flexible metal clothes were assembled to substrate.
金属粉末布贴装到零件表面，经过高温钎焊形成耐磨钎焊涂层。
补充资料：耐磨
1.经得起磨擦。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条