1) Metal tube
金属管
1.
The stator of the motor composes of a metal tube with twelve arrises and PZT pieces stuck to the metal tube.
研制了一种新型金属管状弯曲旋转超声电机,该电机的定子由一个具有12个棱面的金属管和粘贴其上的PZT片组成,其尺寸为外径42 mm、内径34 mm、长44 mm。
2.
Corrosion of underground metal tubes and reinforcing steel bars in the building not only resultin heavy economic losses,but also bring out environmental pollution,and give rise to hidden accident.
地下金属管及建筑物中的钢筋发生腐蚀不仅导致重大经济损失，而且还可引发环境污染，并孕育安全事故隐患。
3.
The dissertation choosed thefuze inductive setting as the research object, especially the study of metal tube, and bringforward some solving ways.
本文就是以引信装定技术中的热点——“感应装定技术”作为研究对象，尤其针对小口径金属管感应装定技术中的难点进行深入分析，提出可行的解决方案。
2) metal hose
金属软管
1.
An automatic device for metal hose welding was designed based on the common latitudinal seam welder,according to the structure of high-pressure metal hose.
在普通环缝焊机的基础上,依据高压金属软管结构特点,研制了一套金属软管焊接自动化装置,主要由旋转装置、传动机构和焊接夹具组成。
2.
This paper describes the application of the safety systems engineering method to solve the pipeline stress of the tanks' exit and entrance and the application of metal hose on the tank of the No.
简要叙述了运用安全系统工程解决油库罐区因地基下沉而造成的储罐出入口管线存在的应力问题 ,及金属软管连接在石油一厂储罐中的应用。
3.
materlal and paraineter of metal hose,the performance of the metal hose was improved,it meeted the requirement of connecting lance in Pangang converter.
通过选取金属软管的结构、材质及相关参数，改善其使用条件，满足了攀钢转炉氧枪软连接的需要。
3) metal tube
金属圆管
1.
In order to simulate the acceleration pulse in impact tests, the design method of the acceleration pulse generator by the multi-segment tubes with different thicknesses based on the theory of metal tubes press expansion was researched.
为模拟碰撞实验中的加速度波形的要求,以金属圆管扩胀变形原理,通过不同壁厚圆管的分段组合形式研究了波形发生器的设计方法。
4) flexible metal tube
金属软管
1.
There had existed corrosion and leakage problems for the flexible metal tubes at the satellite platforms in Chengdao Oilfield for many years.
对埕岛油田卫星平台多年来一直存在的金属软管漏蚀问题进行分析,找出了导致金属软管漏蚀的主要原因,提出了相应的防治措施,主要有:在金属软管外部裹附橡胶垫,采用带弯头的减振金属软管,安装时金属软管的曲率半径要大于其最小弯曲半径等。
2.
Improving the flexible metal tube used in the system of supply and return steam line for hot press,that is to avoid the leak of the steam,and then to raise the product quality and increase the production profits.
对热压机供回汽系统中金属软管进行技术改造,避免了蒸汽的泄漏,提高了产品质量,增加了生产效益。
5) metal micro-tubes
金属微管
1.
The preparation of metal micro-tubes via electroless plating using spider silk as templates was investigated.
研究了以天然蜘蛛丝为模板,利用化学镀工艺制备金属微管的方法。
6) Metal pipeline
金属管道
1.
This paper introduce types and mechanism of corrosion of underground metal pipelines and structures and anti-corrosion methods.
本文介绍了地下金属管道和设备的腐蚀类型和机理以及防腐蚀的方法。
2.
The development tends of anti-corrosion technologies for metal pipelines were analyzed.
介绍了金属管道的腐蚀与防腐蚀原理,详细研究了涂层防腐蚀、金属管复合防腐蚀、电化学防腐蚀、磁场防腐蚀等工艺的优缺点。
补充资料：有色金属管
分子式：
分子量：
CAS号：
性质：金属管的一类。主要有铜管、黄铜管、铅管和铝管。
分子量：
CAS号：
性质：金属管的一类。主要有铜管、黄铜管、铅管和铝管。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条