1) photosensitive resin
光敏树脂
1.
Determination of the critical exposure and the penetration depth of the photosensitive resin for Stereolithography;
光固化快速成形光敏树脂临界曝光量和透射深度的测试研究
2.
Synthesis of waterborne photosensitive resin and study of its membrane properties;
水溶性光敏树脂的制备及成膜性能研究
3.
Study on the effect of factors on curing rate of photosensitive resin in Stereo Lithography
SL中光敏树脂固化速度的影响因素研究
2) photocurable resin
光敏树脂
1.
A novel type of photocurable resin was sythesis through Michael addition of acrylate containing polybasic double bond such as TMPTA with polybasic aliphatic amine such as ethylenediamine and triethylenetetraamine,which was characterizaled by 1HNMR,FT-IR,GPC and UV-curable experment.
光敏树脂具有节约能源、污染小、固化速度快、生产效率高、适宜流水线生产等优点,近年来得到了快速发展[1 4]。
2.
The influence of polymer filler on the shrinkage of photocurable resin used for stereolithography is studied by measuring the viscosity、the specific gravity、the photocuring speed、the linear shrinkage,and the volume shrinkage of the resin containing polymer filler.
本文用聚合物填料对SL用光敏树脂进行改性处理 ,研究了填料量对树脂粘度、密度、固化速度 ,以及对固态聚合物密度、线收缩、和体收缩的影响 ,并经激光快速成型机验证 ,获得了一种用于激光快速成型的实际可行低收缩性光敏树
3.
Telled about the technological process of the Stereo Lithography Apparatus,and introduced the photocurable resin that is the materials specialloy use in the SLA.
对快速成形SLA工艺方法进行了简述,并时SLA专用材料——光敏树脂进行了介绍;分析了光敏材料的组成及其使用特性。
3) photopolymer resin
光敏树脂
1.
Study of fiber orientation in photopolymer resin under the electric field;
电场效应与光敏树脂中纤维取向的研究
2.
Study on shrinkage properties of photopolymer resin for laser rapid-prototyping;
激光快速成型加工中光敏树脂收缩性能研究
3.
In the process of repaid prototyping,control of solidified depth of photopolymer resin is a vital factor for affecting the accuracy of the shape and dimension of parts.
在激光快速成型加工中，光敏树脂固化深度的控制是影响零件形状精度和尺寸精度的重要因素。
4) Photopolymer
[,fəutəu'pɔlimə]
光敏树脂
1.
This paper introduces a method for real time measurements of the shrinkage of the photopolymer.
从实验分析入手，介绍一种实时测量光敏树脂收缩率的测试方法。
5) light-sensitive resin
光敏性树脂
6) water-based photosensitive resin
水性光敏树脂
1.
Effects of raw materials ratio , reaction temperature and the kinds of catalysts on the properties of water-based photosensitive resin which was synthesized with epoxy resin , acrylic acid , malei anhydride as raw materials were investigated.
以环氧树脂、丙烯酸、马来酸酐为原料合成水性光敏树脂,讨论了原料投料比、反应温度、催化剂等因素对合成水性光敏树脂性能的影响;并以滤纸为例,初步研究了水性光敏树脂在低紧度纸张涂布中的应用工艺。
2.
Effects of raw material ratio,reaction temperature and catalyzer kind on properties of water-based photosensitive resin which is synthesized with epoxy resin,acrylic acid,malei anhydride as raw materials were investigated.
以环氧树脂、丙烯酸、马来酸酐为原料合成水性光敏树脂。
3.
It was found that the water-based photosensitive resin could be used in coating and wet-end adding .
以环氧树脂、丙烯酸、马来酸酐为原料合成水性光敏树脂,讨论了原料投料比、反应温度、催化剂等因素对合成水性光敏树脂性能的影响。
补充资料：光敏树脂
分子式：
CAS号：
性质：在紫外线照射下借助光敏剂的作用而使树脂发生聚合，并交联固化成膜，这类树脂称为光敏树脂。是制备光固化涂料的重要原料。所用光敏剂是一类能吸收一定波长的紫外线而产生自由基或离子的化合物。光固化涂料常用的光敏剂有苯乙酮类、二苯甲酮类、硫苯蒽酮类、苯并咪唑衍生物等。
CAS号：
性质：在紫外线照射下借助光敏剂的作用而使树脂发生聚合，并交联固化成膜，这类树脂称为光敏树脂。是制备光固化涂料的重要原料。所用光敏剂是一类能吸收一定波长的紫外线而产生自由基或离子的化合物。光固化涂料常用的光敏剂有苯乙酮类、二苯甲酮类、硫苯蒽酮类、苯并咪唑衍生物等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条