1) nano-Ti-alloy
纳米钛合金
1.
PP/nano-Ti-alloy composites were prepared by melt blending of PP with nano-Ti-alloy.
将纳米钛合金与聚丙烯(PP)经熔融共混制得PP/纳米钛合金复合材料,研究了PP及其复合材料在大气暴露条件下的耐候性,利用傅立叶变换红外光谱仪分析了老化前后PP及其复合材料的化学结构。
2.
Nylon 6/nano-Ti-alloy composites were prepared by melt blending nylon 6 with organized nano-Ti-alloy.
将尼龙6和经有机化处理的纳米钛合金熔融共混制得复合材料,对该复合材料的力学性能、耐化学药品性和热性能进行了研究。
2) binary nano-composite of Ti and Zr
钛-锆二元纳米合金
3) nano-alloy
纳米合金
1.
Research on Nano-alloy, Nano-carbon and Its Polymer Hybrid Materials Prepared Continuously by Pulsed Laser Ablation;
脉冲激光轰击法连续制备纳米合金，纳米碳及其聚合物杂化材料的研究
2.
Preparation and catalytic performance of Fe-Ni-B-O nano-alloy having crystal-palpus structure has been studied.
上述报道方法合成的均为球型纳米合金粉末,具有须状结构的铁系纳米金属微粒的研究尚未见报导,本文用液相还原法合成了须状结构的Fe-Ni纳米合金微粉。
3.
Fe-Ni nano-alloy has been synthesized by reducing mixture solution of Fe~(2+), Ni~(2+) with KBH_4 as reducer and polyethylene glycol as dispersant.
本文采用液相化学还原法，以聚乙二醇为分散剂，在摩尔比为1∶1的硝酸铁和硝酸镍混合盐溶液中滴加碱性硼氢化钾溶液，不断搅拌，金属Fe~(3+)、Ni~(2+)被还原，制得纳米合金微粉。
4) nanocrystalline alloy
纳米合金
1.
A Mg--Zn bulk nanocrystalline alloy was directly prepared by quenching of the melted Mg and Zn at a cooling rate of 50 K/s under pressure of 4 GPa.
用压淬法在 ４ＧＰａ 静高压下，以 ５０Ｋ／ｓ的冷却速率冷却熔化的 Ｍｇ和 Ｚｎ原料，制备出块体的 Ｍｇ－Ｚｎ纳米合金该纳米合金由 Ｍｇ７Ｚｎ３和未知相组成研究了在高压下压力与合成产物相组成及晶粒度间的关系并讨论了块体纳米晶形成的机
2.
An amorphous alloy of single phase could be prepared by mechanical alloying for the nominal composition of Fe60B40 which could hardly be formed by the rapid solidification of molten alloys,while nanocrystalline alloys would be produced in the other composition ranges studied.
在适当条件下机械合金化可以形成急冷法难以得到的单一Ｆｅ６０Ｂ４０非晶合金，而在其他成分内形成亚稳纳米合金。
5) nanometer alloy
纳米合金
1.
The nanometer alloy sample of Fe 69.
5V7Si12 B8Al2 纳米合金样品 。
2.
Recent studies on nanometer alloys used as novel anode materials for lithium ion battery are re viewed with focus on the preparation,elecrochemical properties.
综述了锂离子电池纳米合金负极材料的研究进展。
6) nanostructured alloy
纳米合金
1.
A bulk Al-Fe(Mo,Si,B) nanostructured alloy composed of a single phase was prepared by heating alternate layers of (Fe0.
制备出单相Ａｌ－Ｆｅ（Ｍｏ，Ｓｉ，Ｂ）纳米合金块，其晶体结构属正交晶系，平均晶粒度为２２ｎｍ。
补充资料：Ti-55高温钛合金显微组织
Ti-55高温钛合金显微组织
丫‘“合‘{丫:黔
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条