1) polyvinyl chloride
PVC
1.
Application of high - purity hydrogen chloride-byproduct from potassium sulfate production in polyvinyl chloride production;
K_2SO_4装置副产高纯度HCl在PVC生产中的应用
2.
The effect of CaCO3 nanoparticle and acrylic rubber content on the mechanical properties of polyvinyl chloride(PVC) was studied.
研究了纳米碳酸钙和丙烯酸酯橡胶(ACR)二元增韧聚氯乙烯(PVC)材料,主要考察了丙烯酸酯橡胶以及纳米碳酸钙用量对PVC力学性能的影响,并采用扫描电镜、透射电镜对复合材料的结构进行了观察。
3.
Sealing strip using in automobile door or window was produced by using the polyvinyl chloride(PVC) elastomerics of high polymerization degree as host resin which was modified by blending with nitrile-butadiene rubber(NBR).
以高聚合度PVC弹性体为主体树脂,用丁腈橡胶进行共混改性制备了汽车门窗密封条;对试样进行了硬度、拉伸强度、断裂伸长率、热老化等性能试验;对老化后的试样表面进行了SEM表征。
2) Poly(vinyl chloride)
PVC
1.
Study on Properties and Preparation of Ultrafiltration Membrane from Polyurethane/Poly(vinyl chloride) Blends;
PU/PVC共混超滤膜的制备及性能
2.
Poly(vinyl chloride) was aminated by ethanolamine in DMF and aminated polymers with different content of nitrogen were made under the optimum reaction conditions : the reaction temperature 80℃, molar rate of amine to poly(vinyl chloride) 11, the reaction time within 36h ,and the reaction pressure 2.
确定了最佳反应条件:温度80℃,PVC结构单元与乙醇胺的摩尔比1/1,反应时间小于36 h,反应压力2。
3.
The comprehensive information in both gas phase and condensed phase can be acquired by using cone calorimeter which was used to investigate the synergistic effect of Cu 2O and MoO 3 on flame retardance and smoke suppression of poly(vinyl chloride)(PVC) in this paper.
用锥形量热仪 (CONE)研究Cu2 O/MoO3 体系对PVC的阻燃和抑烟协同效应可以同时获得气相和凝聚相的综合信息。
3) PVC film
PVC膜
1.
Migration of plasticizer di-2-ethylhexyl phthalate from PVC film into water food simulants;
几种水性溶剂对PVC膜中增塑剂DEHP的溶出作用
2.
In this paper, the migration of DEHA in PVC film for food packaging dipped in stimulant oil, hormal hexane, was studied.
实验结果表明:速度常数随浸泡温度的上升和PVC膜中DEHA的起始浓度的提高而增加。
3.
PVC materials contain PVC film.
综述近十余年来国内各种PVC材料粘接的研究进展,分类介绍PVC膜、PVC管材,PVC革、PVC板材和PVC装饰材料等所用胶粘剂的概况,讨论了各种材料所适用的胶粘剂种类,并通过剥离强度,粘接强度等主要性能指标分析了各胶粘剂的主要性能。
4) PVC membrane
PVC膜
1.
Objective: To study the specialities of reaction being taken place between chelate reagent in PVC membrane and Fe 2+ in water.
目的 :研究固定在PVC膜上的络合显色剂与水中Fe2 +的反应特性。
2.
The calcium ion sensing needle is based on acupuncture needle as supporter, and coated with PVC membrane which are mixed with sensitive material,the methods of making the membrane how to effect its properties are introduced.
钙离子传感针是以针灸针为基体 ,将钙离子敏感材料的 PVC膜复合其上而制成的微电极 ,介绍了不同成膜方法对其性能的影响。
3.
In this paper, a new PVC membrane iodide ion-sensitive electrode has been prepared on the basis of the complexes of metallotetraazaannulene macrocycliclic as carriers.
以镍（Ⅱ）-四氮杂轮烯大环配合物为载体，制备了一种新型PVC膜碘离子化学传感器。
5) PVC bag
PVC袋
1.
OBJECTIVE To investigate the stability of acyclovir in PVC bags,three-layer plastic bags with the innermost layer made of polyethylene and glass containers.
目的考察阿昔洛韦在PVC袋(聚氯乙烯输液袋)、三层复合膜输液袋及玻璃瓶中的稳定性是否存在差异。
补充资料：PVC
结构式【－CH2-CHCl]n-
由单体氯乙烯经加聚反应生成的热塑性线型树脂。工业品为白色或浅黄色粉末。密度（20/4℃）1.40g/cm3，含氯量56～58％。低分子量的易溶于酮类，酯类和氯代烃类等溶剂。高分子量的难溶。聚氯乙烯树脂经加工成型就得到聚氯乙烯塑料。其单体成本低、生产工艺成熟、易加工成型。耐酸碱性、耐磨性、电绝缘性好，不燃烧；但热稳定性和耐光性差。140℃分解放出氯化氢，在加工成型过程中，需加入稳定剂。软化温度低，限在80℃以下使用。根据所加增塑剂的多少，可制得软质塑料和硬质树脂。软质塑料可用作电线电缆包皮和其它绝缘材料，可制成透明薄膜，用作雨衣、台布、农用育秧薄膜等；还用来制人造革、泡沫塑料和氯纶纤维。硬质塑料可用于制板材、管道、贮槽、吸收塔等。氯乙烯经悬浮法聚合可得粉末状树脂，若用乳液法聚合，可得糊状树脂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条