2) halogen-free flame retardant acrylnitrile-butadiene-styrene copolymer
非卤阻燃ABS
3) halogen-free flame retardant
无卤阻燃
1.
Study of halogen-free flame retardant polypropylene combustibility by using cone calorimeter;
用锥形量热仪研究无卤阻燃聚丙烯体系燃烧性
2.
Synergistic effect of zinc borate in intumescent halogen-free flame retardant ABS composite;
硼酸锌在膨胀型无卤阻燃ABS中的协同作用
3.
Study on Halogen-free Flame Retardant ABS/IFR/Hollow Bead Composite Toughened by Elastomer;
无卤阻燃ABS/空心微珠复合材料的研究
4) non-halogen flame-retardant
无卤阻燃
1.
In this paper Mg OH 2 and red phosphorus as non-halogen flame-retardant additives for polypropylene (PP) were studied.
研究了添加红磷与不同粒径的无卤阻燃剂氢氧化镁后的聚丙烯的阻燃效果,工艺简单。
2.
By the way of dynamic vulcanization,the thermoplastic elastomers(TPE) have been manufactured,which are applied to the modification of PE resin,and non-halogen flame-retardant cable materials that meet the requirements have been made.
本文采用动态硫化法制成热塑性弹性体 ,并把它应用于聚乙烯树脂的改性 ,研制出了符合要求的无卤阻燃电缆料。
3.
Red phosphorus as non-halogen flame-retardant additives for polypropylene (PP) were studied.
采用包覆红磷作为无卤阻燃剂对聚丙烯(PP)进行了阻燃改性。
5) halogen free flame retardant
无卤阻燃
1.
Development of halogen free flame retardant polyolefin cable material;
无卤阻燃聚烯烃电缆料的发展概况
2.
The functions were as following:type of vinyl group silicone gum;type and dosage of fumed silica;type and dosage of structural control agent;dosage of anti creepage trace agent;dosage of halogen free flame retardant and the type of vulcanization system.
研究乙烯基生胶的种类,气相白碳黑,结构控制剂的种类和用量;耐漏电起痕添加剂,无卤阻燃剂的用量,以及硫化体系等对冷缩(预扩张)电缆附件用硅橡胶的物理力学和电性能的影响。
3.
Using chemical crosslinking technology and one step compression molding process,the foaming technique of halogen free flame retardant low density polyethylene(LDPE) modified by ethylene vinyl acetate copolymer(EVA) was studied.
以乙烯 醋酸乙烯酯 (EVA)改性低密度聚乙烯 (LDPE) ,添加无卤阻燃剂氢氧化镁 ,采用高温混炼、化学交联、模压一步法来制备无卤阻燃改性PE泡沫塑料。
补充资料:阻燃ABS树脂
分子式:
CAS号:
性质:以ABS树脂为基材,添加高热稳定阻燃剂、添加剂等,经混合、熔融塑炼造粒包装成产品。为白色粒料,具有较高的机械强度,良好的阻燃性和优异的流动性,制品收缩性小,外观光洁且有一定的涂饰性。拉伸强度40MPa,弯曲强度65MPa,热变形温度89℃,阻燃性UL-94,V-O级。用于电视机阻燃前框,及其他各种阻燃电器零部件。
CAS号:
性质:以ABS树脂为基材,添加高热稳定阻燃剂、添加剂等,经混合、熔融塑炼造粒包装成产品。为白色粒料,具有较高的机械强度,良好的阻燃性和优异的流动性,制品收缩性小,外观光洁且有一定的涂饰性。拉伸强度40MPa,弯曲强度65MPa,热变形温度89℃,阻燃性UL-94,V-O级。用于电视机阻燃前框,及其他各种阻燃电器零部件。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条