1) layered material
层状材料
1.
Intercalating process of the inorganic layered materials with organosilicane;
有机硅对无机层状材料的插层处理
2.
The new layered materials SiY1 and SiY2 were prepared with Si(OC2H5)4 and CH3(CH2)16COOH.
采用硬脂酸与正硅酸乙酯制备了新型的层状材料SiY1、SiY2,并用X射线衍射(XRD)、差示扫描量热(DSC)表征了其结构,利用热重分析(TG)考察了其热稳定性。
2) layered materials
层状材料
1.
Inorganic layered materials are a class of compounds that possess regular lamellar structure.
通过调变层板骨架阳离子、表面负载活性物种、层间柱撑无机或有机基团合成了各种新型功能性层状材料,并在酸碱催化、光催化、环保以及医药等领域有着广泛的应用。
3) LDHs layered materials
LDHs层状材料
1.
An effective combination of a series spinel ferrites and LDHs layered materials to form core-shell structured nanometer magnetic catalytic materials has been designed and realized in this thesis.
本论文提出将一系列尖晶石铁氧体材料与LDHs层状材料进行组装制备核-壳结构的磁性纳米复合催化材料。
5) layered composite materials
层状复合材料
1.
Self-assembled organic/inorganic layered composite materials;
自组装制备有机/无机层状复合材料
2.
The possibility to improve the bonding of Al-Pb interface with taking Bi or Sn as the third element in the interface was analyzed by function of bonding parameters,and the layered composite materials of Al-Bi-Pb and Al-Sn-Pb were prepared by liquid-solid coating method.
利用键参数函数理论分析了第三组元Bi或Sn作为Al-Pb非混溶体系实现冶金结合一体化的可行性,并采用液-固包覆成型的方法制得了Al-Bi-Pb及Al-Sn-Pb层状复合材料,通过SEM、EDS等检测手段分析研究试样的显微组织,并讨论了界面的扩散现象。
6) laminated composites
层状复合材料
1.
Fabrication of mullite/aluminum titanate laminated composites;
莫来石/钛酸铝层状复合材料的制备
2.
ZrB2/Mo laminated composites,in which ZrB2 containing 10 vol% nano-SiC whiskers and 10 vol% SiC particles were taken as matrix layer and Mo as interfacial layer were prepared by roll-compaction and hot-pressing sintering at 1950°C for 1 h under 20 MPa pressure in flow argon.
以SiC颗粒和纳米SiC晶须复合增韧的ZrB2为基体层,以金属Mo为界面层,采用轧膜成型和热压烧结的方法,在1950℃,1h,25MPa压力/Ar气氛的条件下,成功制备了ZrB2/Mo层状复合材料。
3.
C/BN laminated composites were obtained by spark plasma sintering.
采用放电等离子烧结技术(SPS)快速烧结了C/BN层状复合材料,研究了烧结工艺、结构和性能之间的关系。
补充资料：层状结构催化剂
分子式：
CAS号：
性质：在层状结构物中层与层之间引进有机或无机的基因，从而具有催化作用的催化剂。其优点是可通过控制层间距(如0.5～4.0nm)，使反应物定向，以达到独特的反应物和产物选择性。层状结构材料可以用天然层状黏土或水滑石等改性，也可以用K2La2Ti3O10等起始层板材料分步交换制得。提高柱层状结构物的热稳定性和水热稳定性，目前还比较困难。
CAS号：
性质：在层状结构物中层与层之间引进有机或无机的基因，从而具有催化作用的催化剂。其优点是可通过控制层间距(如0.5～4.0nm)，使反应物定向，以达到独特的反应物和产物选择性。层状结构材料可以用天然层状黏土或水滑石等改性，也可以用K2La2Ti3O10等起始层板材料分步交换制得。提高柱层状结构物的热稳定性和水热稳定性，目前还比较困难。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条