1) additional
[英][ə'dɪʃənl] [美][ə'dɪʃənḷ]
加成型
1.
Prime coating & viscosifier of additional LSR;
加成型液体硅橡胶的底涂剂及增粘剂
2.
Prime coating & viscosifier for additional LSR (continued).;
加成型液体硅橡胶的底涂剂及增粘剂(续)
3.
Study on two components additional silicone gel used in sensor.;
传感器用双组分加成型硅凝胶的研究
2) addition type
加成型
1.
Manufacture on addition type transparency liquid silicone rubber for textile trademarks;
加成型纺织商标用液体硅橡胶的配方设计
2.
The properties of addition type silicone rubber were determined by mechanical test machine and hardness meter, then the effects of molecular weight of ethyl silicone rubber, crosslink agent type, ratio of to , filler type on the property were reviewed.
合成了不同乙烯基含量的 MQ树脂 ;探讨了不同因素 (乙烯基硅橡胶分子量、含氢硅油种类、Si H/CH=CH2 比例、填料种类 )对于加成型有机硅橡胶物理力学性能的影响。
3) addition
[英][ə'dɪʃn] [美][ə'dɪʃən]
加成型
1.
The vulcanization mechanism,composition,application of addition type liquid silicone rubber are reviewed.
介绍了加成型液体硅橡胶的硫化机理、组成及应
2.
Comparing the addition curing system and peroxide curing system on the mechanical properties of silicone rubber products and its cost,the results show that compared with the peroxide silicone rubber,when curing to the similar amount of curing agent,the tensile strength and tear strength.
采用PL-10A/TM-10B的加成型固体硅橡胶因生产效率而降低单位产品生产成本,具有较强的竞争优势。
3.
Two-part addition cure liquid silicone rubber was prepared with low viscosity organopolysiloxane containing alkenyl group as basic gum, high pure quartz as filler, organohydrogenpolysiloxane as crosslink agent and catalyzed by Pt catalyst.
以低黏度端乙烯基硅油为基胶、高纯石英粉为填料、含氢硅油为交联剂、铂配合物为催化剂,制得双组分加成型硅橡胶电子灌封料。
4) addition-cured
加成型
1.
Fumed silica as reinforcing agents were used to fill in the addition-cured room temperature vulcanization silicone rubber in this paper.
采用气相法白炭黑作补强剂填充加成型RTV硅橡胶,研究了白炭黑含量对硅橡胶黏度、力学性能、介电性能以及硫化时间的影响,并通过SEM考察了白炭黑在硅橡胶中的分散效果。
2.
In this paper, addition-cured room te.
加成型室温硫化硅橡胶因具有制造简单、使用方便、固化交联反应不产生副产物、可深层硫化、操作时间可控制、介电性能优良、线收缩率低等优点已在各个工业部门得到了广泛应用。
5) addition cure
加成型
1.
Manufacture and study on addition cure high transparency and strength LIMS for iatrical grade;
加成型医用高透明液体注射硅橡胶的制备与研究
6) processing
[英]['prəʊses] [美]['prɑsɛs]
成型加工
1.
Reconstruction and Reformation of Polymer Materials Processing Curriculum;
高分子材料成型加工课程建设与教学改革
2.
The paper introduces the properties,processing methords and application of UHMWPE,and also indicates its main points during processing and application at home.
介绍了超高相对分子质量聚乙烯(UHMWPE)的性能、成型加工方法及其在各领域的应用情况,指出了其加工难点和要点及在国内的应用前景。
3.
The property,processing and application of UHMWPE were studied .
介绍了超高相对分子质量聚乙烯 (UHMWPE)的性能、成型加工和应用情况 ,并且对未来市场情况进行了分
补充资料：加成型三嗪树脂
分子式：
CAS号：
性质： 胺氰化合物经加成反应合成的一类含均三嗪环结构的热固性树脂。以伯双胺腈和仲二(N-磺酰胺)胺腈为原料，在加热时通过加成反应形成均三嗪环及交联结构。预聚物溶于低沸点溶剂，预浸料的贮存稳定性和加工性能优良，适用作纤维增强复合材料基体树脂。碳纤维层压板的弯曲强度和弯曲模量分别是1470MPa(25℃)、903MPa(232℃)和100GPa(25℃)、93GPa(232℃)。
CAS号：
性质： 胺氰化合物经加成反应合成的一类含均三嗪环结构的热固性树脂。以伯双胺腈和仲二(N-磺酰胺)胺腈为原料，在加热时通过加成反应形成均三嗪环及交联结构。预聚物溶于低沸点溶剂，预浸料的贮存稳定性和加工性能优良，适用作纤维增强复合材料基体树脂。碳纤维层压板的弯曲强度和弯曲模量分别是1470MPa(25℃)、903MPa(232℃)和100GPa(25℃)、93GPa(232℃)。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条