1) in situ recrystallization
原位再结晶
1.
There are in situ recrystallization and discontinuous recrystallization at annealing temperature.
结果表明,Cr可以有效地阻碍再结晶过程,提高材料抗高温软化性能;在退火过程中可发生原位再结晶和不连续再结晶两种再结晶形式,再结晶的形式主要取决于析出相颗粒的大小,可以钉扎住晶界移动的Cr析出相的临界尺寸约为43。
2.
5% yield by using hydroboration-in situ recrystallization procedure as shown in Scheme 2.
6％e e)(-)-α-蒎烯通过硼氢化-原位再结晶,制备高光学纯(97。
2) in-situ crystallization
原位结晶
1.
The non-in-situ crystallization occurring in in-situ crystallization process ofkaolin microspheres has been characterized by XRD, SEM, etc.
以XRD、SEM等方法表征了高岭土微球原位合成NaY过程中产生的非原位结晶,研究了非原位结晶的形成与晶化体系化学组成、晶种、搅拌速度等对非原位结晶的影响,提出了控制非原位晶化反应的可能方法。
2.
Because the composite ceramics were obtained through SHS in-situ crystallization and symbiotic .
由于该复相陶瓷是通过SHS原位结晶及在大过冷条件下熔体发生共生共晶反应生成的,所以在本实验条件下只有亚共晶成分的复相陶瓷才易获得ZrO_2相纤维直径在纳米/微米级尺度上的1-3复合的Al_2O_3-ZrO_2纳米/微米晶内型复相陶瓷。
3.
The in-situ crystallization process of terephthalate-pillared Ni-Al-LDHs on γ-Al2O3 is accompanied by ex-situ crystallization reaction.
在-γAl2O3表面原位合成对苯二甲酸柱撑Ni-Al-LDHs/-γAl2O3的过程中伴随着非原位结晶反应。
3) in-situ crystallization technique
原位结晶法
1.
Because it provides a convenient means to control the shape ,size and distribution of reinforcements in MMCs,in-situ crystallization technique has been studied widely and thoroghly.
原位结晶法制备的自生颗粒增强金属基复合材料因其增强体尺寸、形态与分布方式便于人工控制的特点而备受重视。
4) ex-situ crystallization
非原位结晶
1.
The in-situ crystallization process of terephthalate-pillared Ni-Al-LDHs on γ-Al2O3 is accompanied by ex-situ crystallization reaction.
在-γAl2O3表面原位合成对苯二甲酸柱撑Ni-Al-LDHs/-γAl2O3的过程中伴随着非原位结晶反应。
5) remelt junction
再结晶结
6) recrystallized grains
再结晶晶粒
1.
Effects of solution treatment temperature on the recrystallized grains,the second phases,electrical conductivity and tensile properties of cold rolled Al-1.
结果表明:合金在520℃~560℃之间进行固溶处理时,随着固溶温度的升高,其再结晶晶粒尺寸变化不大,而第二相粒子的数量明显减少;且固溶态合金的伸长率也随着固溶温度的升高而增大,560℃固溶后伸长率最大。
补充资料：二次再结晶(见再结晶晶粒长大)
二次再结晶(见再结晶晶粒长大)
secondary recrystallization
erCI 201」le」Ing二次再结晶(seeondary reerystallization) 见再结晶晶杠长大。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条