1) hoisting
[英][hɔist] [美][hɔɪst]
吊装
1.
Application of dynamic large tonnage gantry crane of center hole jack to hoisting;
穿心式千斤顶动力的大吨位起重机在吊装工程中的运用
2.
Dismantlement and hoisting skill of shield-shaped machine;
浅谈盾构机拆卸及吊装技术
2) lifting
[英][lift] [美][lɪft]
吊装
1.
Prefabrication, lifting and transmission of 18 m reinforced concrete broken-line roof truss;
18m钢筋混凝土折线形屋架预制、吊装及运输
2.
The lifting and transportation method of prestressed hollow plate in Fubi Bridge construction;
付壁大桥预应力空心板吊装运输方法
3.
Stretching,grouting and lifting of 24 m-stride prestress roof truss;
24m跨预应力屋架张拉、灌浆及吊装
3) erection
[英][ɪ'rekʃn] [美][ɪ'rɛkʃən]
吊装
1.
Research on Erection and Installation of 195m Span Box Reinforced Concrete Arch Bridge;
195m钢筋混凝土箱形拱桥吊装施工技术研究
2.
A detailed description is given of the technique for prefabrication and erection of the 35 m small box girder.
箱梁的安装,采用了轨道平车运梁,架桥机吊装。
3.
According to the topographic situations of Houjiagou Bridge,the paper discussed how to choose reasonable, economical erection plan to construct.
根据侯家沟大桥特殊的地形状况,选用最合理、最经济的吊装方案,进行大桥的箱梁吊装。
4) Hoist
[英][hɔɪst] [美][hɔɪst]
吊装
1.
Procedure Control and Precautions of Cable-hoisting Arch Bridge;
缆索吊装箱形拱桥的工序控制及注意事项
2.
On hoisting construction study of large span girder in the space
大跨度桁架现场吊装施工研究
3.
The big sectional wind duct 7000×1000(7500×630)is welded with steel sheet δ=3mm thick,assembling and hoisting in the locale.
对于大截面风管,采用δ=3mm薄钢板进行焊接制作、现场组装和吊装。
5) lifting and erection
吊装
1.
The 228-m reinforced concrete box arch span of the main bridge of Tianchi Bridge is currently the longest span bridge of its kind in China,whose main arch rings were constructed by the precasting,lifting and erection methods.
天池大桥主桥228 m钢筋混凝土箱形拱桥是目前国内同类型桥梁之最,主拱圈采用预制吊装法施工。
2.
In the light of the characteristics of composite girders,the construction techniques and features of lifting and erection of the composite girders of Qingzhou Minjiang River Bridge are dealt with.
根据结合梁的特点,介绍青洲闽江大桥结合梁的吊装施工技术及施工特点。
3.
In this paper, the construction of the principal structure of the Bridge is presented, in which the lifting and erection of arch ribs, steel tie beams, cross beams of hangers of both upper and lower decks, cross beams of posts on arch, hollw slab girders and π deck plates are included.
介绍其主体结构的施工,主要包括拱肋的吊装、钢系梁的吊装、上层吊杆横梁的吊装、下层吊杆横梁的吊装、拱上立柱横梁的吊装、空心板梁、π形桥面板的吊装。
6) hoisting and installation
吊装
1.
In the Xiaowan hydropower station,the low diversion tunnel is designed of a arc gate at its downstream side,the pressured seal of the arc gate makes hoisting and installation of the gate difficult.
小湾水电站导流底孔下游侧布置弧型工作门,弧门设置充压水封装置,给弧门结构件的吊装增加了难度,施工单位根据现场施工条件,制定出切实可行的吊装方案,顺利完成了弧门结构件的吊装,为后续弧门结构件的吊装积累了经验。
2.
The hoisting and installation technique of this type of boiler are still under exploration.
浙江国华宁海电厂二期2×1000 MW工程采用了1000 MW塔式锅炉,该类型锅炉吊装中的技术工艺尚处于探索阶段。
补充资料：吊装
分子式：
CAS号：
性质：又称吊烧。细长形瓷件生坯头部预留可作为支撑的烧头或先穿入已烧好的耐温瓷棒，将坯体悬吊起来烧成，出窑后用瓷件切割机或电阻丝局部加热急冷法将吊烧头除去。对生坯强度较低的坯体，其底部可用坯垫支撑，烧成瓷件过程中因坯体收缩，瓷件自动离开坯垫，而由头悬空支撑。吊装可大大减少细长形，棒形瓷件烧成时的弯曲变形，并可提高装窑密度。辊道窑瓷套管、测温热电偶管等都可采用吊装技术，效果良好。
CAS号：
性质：又称吊烧。细长形瓷件生坯头部预留可作为支撑的烧头或先穿入已烧好的耐温瓷棒，将坯体悬吊起来烧成，出窑后用瓷件切割机或电阻丝局部加热急冷法将吊烧头除去。对生坯强度较低的坯体，其底部可用坯垫支撑，烧成瓷件过程中因坯体收缩，瓷件自动离开坯垫，而由头悬空支撑。吊装可大大减少细长形，棒形瓷件烧成时的弯曲变形，并可提高装窑密度。辊道窑瓷套管、测温热电偶管等都可采用吊装技术，效果良好。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条