1) RTV
室温硫化
1.
Study of Mechanical Properties of RTV Silicone Sealant Modified by Carbonyl Iron Powder;
羰基铁粉填充室温硫化有机硅密封胶力学性能的研究
2.
Study on one-component condensating type RTV fluorosilicone adhesive;
单组分缩合型室温硫化氟硅橡胶胶粘剂的研制
3.
Study on water-based RTV silicone rubber having self-catalytic crosslinker;
自催化交联体系室温硫化水性硅橡胶研究
2) room temperature vulcanization
室温硫化
1.
The development of room temperature vulcanization silicone rubber and water based silicone rubber was reviewed The preparation method and crosslinking mechanism of water based silicone rubber were introduced The crosslinking mechanism,capability and applications of water based silicone rubber were described in detail
简要回顾了室温硫化硅橡胶及水基硅橡胶的发展过程 ,介绍了水基硅橡胶的制备方法及交联机理 ,并对其交联过程、性能及用途作了较详细的阐述。
2.
Addition-cured room temperature vulcanization silicone rubber can be vulcanized in room temperature with no small molecules be emitted and no heat and shrinkage be generated during vulcanization.
加成型室温硫化硅橡胶因其硫化反应是在室温下进行，在硫化交联过程中不放出低分子物，不发热、不收缩；硫化后的硅橡胶无毒、机械强度高、具有卓越的抗水解稳定性、良好的低压缩形变、低燃烧性、可深度硫化、以及硫化速度可以用温度来控制等优点，因此自问世以来立即受到各工业部门的关注，并进行了大量的应用工作。
3.
Addition-cured room temperature vulcanization silicone rubber has the advantages of favorable handling properties, short setting time, producing no outgrowth, and dimensional stability, which have resulted in its popularity in many industrial fields.
加成型室温硫化硅橡胶因具有制造简单、使用方便、固化交联反应不产生副产物、可深层硫化、操作时间可控制、介电性能优良、线收缩率低等优点已在各个工业部门得到了广泛应用。
3) room temperature vulcanized
室温硫化
1.
One-part room temperature vulcanized fluorosilicone rubber(FR1)containing ND-42(phenylaminomethyl triethoxysilane)as crosslinker and dibutyltin dilaurate as condensation catalyst can cure quickly and has good adhesive properties.
研究以苯胺甲基三乙氧基硅烷（南大－４２）为交联剂的单组分缩合型室温硫化氟硅橡胶和以硅氮化合物ＫＨ－ＣＬ或正硅酸乙酯为交联剂的双组分缩合型室温硫化氟硅橡胶的硫化性能及其粘接性能。
4) room temperature selfvulcanization
室温自硫化
1.
The characteristics of butyl rubber lining from room temperature selfvulcanization are described for anticorrosion treatment, also some detailed services and job practice about the lining are summed up.
介绍室温自硫化丁基橡胶防腐衬里的特性,总结该衬里的具体应用和施工方法。
5) room-temperature vulcanized silicone rubber
室温硫化硅橡胶
1.
Enhancing methods of room-temperature vulcanized silicone rubber adhesive;
室温硫化硅橡胶胶粘剂的增强方法
2.
With PDMS(polydimethyl siloxane)of appropriate viscosity as matrix and addition of appropriate fillers and assistants,the room-temperature vulcanized silicone rubber coatings was successfully prepared.
采用一定粘度的聚二甲基硅氧烷为基体,加入适量填料和助剂,成功制备了室温硫化硅橡胶涂层。
3.
With hydroxyl group terminated PDMS on both side as feedstock, adding several kinds of fillers and adjuvants, the room-temperature vulcanized silicone rubber coatings are prepared.
以二羟基聚二甲基硅氧烷(PDMS)为基体,加入不同填料和助剂,制备了室温硫化硅橡胶涂层。
6) room temperature vulcanized silicone rubber
室温硫化硅橡胶
1.
Modified room temperature vulcanized silicone rubber adhesive filled in situ with silica white;
白炭黑原位填充的改性室温硫化硅橡胶胶黏剂
2.
Research progress in thermal conductive room temperature vulcanized silicone rubber;
导热室温硫化硅橡胶的研究进展
3.
Progress in reinforcemnet and modification of room temperature vulcanized silicone rubber;
室温硫化硅橡胶的增强改性研究进展
补充资料：室温硫化
分子式：
CAS号：
性质：用氯化硫黄在室温下硫化薄膜橡胶制品是传统的方法，现在主要用硫黄加超速促进剂二硫代氨基甲酸盐或黄原酸盐，可使胶料在常温下自然硫化，此即室温硫化。这类促进剂常用于自然硫化的胶黏剂，此即室温硫化。这类促进剂常用于自然硫化的胶黏剂、修补用胶料、浸渍制品及薄胶布等制品。此外，改性的硅橡胶与有机硅化合物及有机金属化合物混合后，亦可在室温下硫化。
CAS号：
性质：用氯化硫黄在室温下硫化薄膜橡胶制品是传统的方法，现在主要用硫黄加超速促进剂二硫代氨基甲酸盐或黄原酸盐，可使胶料在常温下自然硫化，此即室温硫化。这类促进剂常用于自然硫化的胶黏剂，此即室温硫化。这类促进剂常用于自然硫化的胶黏剂、修补用胶料、浸渍制品及薄胶布等制品。此外，改性的硅橡胶与有机硅化合物及有机金属化合物混合后，亦可在室温下硫化。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条