1) thermal shrinkage
热收缩
1.
The influence of MMT naonomaterials on the thermal shrinkage performance of PET fiber was investigated by means of WAXD, DSC, fiber orientation measurement, etc.
利用WAXD、DSC和声速法等手段测试纤维的取向、结晶度及结晶形态等的变化,研究蒙脱土的加入对PET纤维热收缩性能的影响。
2.
In this paper structures and properties of thermal shrinkage PP fiber were studied.
添加改性组分共混纺丝可以进一步提高所得纤维的热收缩性。
3.
The chemical structure changes and the thermal shrinkage of PAN fiber are studied when it is first treated in nitrogen gas.
在聚丙烯腈(PAN)纤维不熔化过程中,由于受到热作用,分子链沿纤维轴向发生热收缩,分子解取向。
2) heat shrinkage
热收缩
1.
Film heat shrinkage of black-and-white milk package and influence upon the film heat-sealing performance;
牛奶包装用黑白膜热收缩性及对热封性能的影响
2.
This paper studied the effects of Sb and Ti system catalyst on the synthesizing process the heat shrinkage film polyester,as well as the effects of comonomers as CHDM,DEG and IPA on the glass transition temperature (T_g),melting point (T_m),crystallizing performance,thermo stability of the heat shrinkage film polyester and the properties of heat shrinkage film.
研究了锑系和钛系催化剂对热收缩膜用聚酯合成工艺的影响,以及共聚单体1,4-环已二甲醇(CHDM)、二甘醇(DEG)和间苯二甲酸(IPA)对热收缩膜用聚酯的玻璃化转变温度(T_g)、熔点(T_m)、结晶性能、热稳定性和聚酯热收缩膜性能的影响。
3.
This paper determined the conditions of the capillary extrusion of LLDPE and measured the mechanical properties and the heat shrinkage property of the LLDPE fibres extruded at 180℃ and low temperature zone drawn fibres(drawn at 120℃and draw ratio 8-15).
本文测试了在１８０℃下由毛细管挤出的ＬＬＤＰＥ单丝和低温区域拉伸丝的力学性能和热收缩性能。
3) heat shrinkable
热收缩
1.
One-step forming process of PVC heat shrinkable film;
PVC热收缩膜一步法成型工艺
2.
The heat shrinkable polyester film is a shrinkable packaging material developed recently in the world.
单向拉伸聚酯热收缩薄膜是国外最新开发的收缩包装材料,具有许多优异的特件,是目前广泛使用的PVC热收缩薄膜的理想替代品。
3.
The development and application of insulating tapes made of heat shrinkable films were described.
介绍了热收缩薄膜交织布绝缘保护带的研制、试验以及应用情况。
4) Thermal contraction
热收缩
1.
The experimental results showed that the fiber morphology had little effects on the mechanical properties of the fibers when the plain fibers were processed into the enlarged-end and slubby staple fibers, but their thermal contraction decreased and the dynamic mechanical property changed to some extent,which resulted from the decrease of storage modulus and the increase of dynamic l.
结果表明 ,将平直纤维加工成凸端短纤维和竹节状短纤维 ,对纤维拉伸性能的影响不大 ,但纤维的热收缩减小 ,并使纤维的动态力学性能发生一定程度的变化。
2.
The experimental results show that the nearest interatomic distance r1 and the coordination number Ns of In melt decrease with increasing temperature from 280℃ to 750℃, and thermal contraction phenomenon of atom cluster occurs.
实验结果表明,In熔体的平均最近邻原子间距和原子配位数随温度的升高而减小,原子团簇出现热收缩现象,且收缩在390～550℃温度区间内发生突变,收缩明显。
5) shrinkage by heat
热收缩
1.
Evaluation of shrinkage by heat of 0.6-taperd gutter-perchas;
大锥度牙胶尖热收缩性能的评价
6) heat shrinkable film
热收缩膜
1.
Development of speciality resin for heat shrinkable film;
热收缩膜专用树脂的开发
2.
The heat sensitivity of polyvinyl chloride (PVC) heat shrinkable film was described.
阐述了聚氯乙烯（PVC）热收缩膜的热敏性，并从生产实际的角度详细讨论了PVC热收缩膜热敏性的影响因素以及热敏性与成型收缩率和贮存性能之间的关系。
补充资料：干热收缩
分子式：
CAS号：
性质：纤维经于热空气处理前后长度的差数对处理前长度的百分率。此参数表征生产过程中热处理效果和纤维内部分子微细结构变化的影响。关系到纺织加工和织物的尺寸稳定性。
CAS号：
性质：纤维经于热空气处理前后长度的差数对处理前长度的百分率。此参数表征生产过程中热处理效果和纤维内部分子微细结构变化的影响。关系到纺织加工和织物的尺寸稳定性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条