1) tire cord steel
帘线钢
1.
Composition control of a CaO-SiO_2-Al_2O_3-MnO system in tire cord steel;
帘线钢CaO-SiO_2-Al_2O_3-MnO系夹杂物的成分控制
2.
Inclusion precipitation in tire cord steel during solidification;
帘线钢凝固过程中夹杂物析出
3.
Minimum free-energy change model for controlling inclusion components in tire cord steel
帘线钢夹杂物成分控制的最小自由能变化模型
2) Cord Steel
帘线钢
1.
Analysis on Pencil-Tip Shaped Fracture of Cord Steel 72A during Cold Drawing and Improvement of Process
72A帘线钢线材冷拔笔尖状断裂分析和改进工艺措施
2.
In order to establish suitable heated process parameters for 72A cord steel billets, three aspects of heat treatment experiments were made, including an oxidized and decarburized experiment related to surface quality, a thermal diffusion experiment on reducing central carbon segregation, and an austenitic coarsening experiment on microstructure controlling.
为了合理制定72A帘线钢小方坯的加热制度,研究了影响表面质量的氧化脱碳规律、改善中心碳偏析的热扩散规律以及决定组织形态的奥氏体粗化温度测定三方面的热处理工艺;并在此基础上对工业加热参数做出了优化。
3) tyre cord steel
帘线钢
1.
The production process of tyre cord steel was presented, and the technical status quo of smelting, refining and continuous casting of tyre cord steel were analyzed by investigation technical data.
通过相关文献资料调研,介绍了帘线钢生产工艺流程及其冶炼、精炼和连铸技术现状,重点分析了帘线钢的质量控制。
2.
The quality requirement of tyre cord steel was introduced,and the production process was presented,the technical status quo of smelting,refining and continuous casting of tyre cord steel were analyzed emphatically,By contrasting steel mills production status at home and abroad,the purity control in domestic tyre cord steel production was proposed to make greater efforts.
简要阐述帘线钢的质量要求,重点分析了帘线钢的生产工艺流程及冶炼、精炼和连铸技术现状,通过国内外钢厂生产现状的对比,建议国内帘线钢生产应在洁净度控制方面多下功夫。
3.
The article presents the analysis requirements for modification of inclusions in tyre cord steel.
本文主要介绍了帘线钢夹杂物改性的成分要求,对影响帘线钢断丝原因进行了分析,并对某钢厂在夹杂物控制方面所做的工作和结果作了介绍。
4) steel for cord
帘线钢
1.
To set forth market situation of steel for cord.
阐述帘线钢市场状况,根据帘线钢对化学成分、冶炼质量、表面质量和组织性能等主要技术要求,结合鞍钢开发帘线钢的过程,提出钢帘线用钢生产过程中央杂物控制、成分偏析、化学成分控制、轧制缺陷及氧化皮重量的控制、组织索氏体化与质量检测等技术难点,对帘线钢生产技术研究及应用和今后的发展提出一些建议。
2.
Requirements of purity degree, surface quality and microstructure for steel for cord arc strict.
帘线钢对纯净度、表面质量、金相组织等要求十分严格。
5) Wire for Steel Cord of Tyre
钢帘线钢
6) steel cord
钢丝帘线
1.
Application of 0.25+6+12×0.225HT steel cord in carcass ply of TBR tire;
0.25+6+12×0.225HT钢丝帘线在全钢载重子午线轮胎胎体中的应用
2.
Application of new structure steel cord in TBR tire;
全钢载重子午线轮胎新结构钢丝帘线的应用
3.
Application of 5×0.35HI steel cord in belt guard ply of TBR tire;
5×0.35HI钢丝帘线在全钢载重子午线轮胎带束保护层中的应用
补充资料：钢丝帘线
分子式：
CAS号：
性质：由优质高碳钢经表面镀层、拉拔、加捻制成，是轮胎主要骨架材料之一。钢丝轮胎帘线包括胎体用钢帘线和带束层用钢帘线。轮胎钢丝帘线一般由不同直径的单丝组成股线捻制而成。根据轮胎规格和使用部位的不同，其单丝根数和帘线的结构亦不同。钢线帘线主要用于全钢子午线轮胎的胎体层和带束层，以及纤维子午线轮胎的带束层。钢丝帘线的帘线结构、表面镀层等均影响其力学性能和黏合性能。
CAS号：
性质：由优质高碳钢经表面镀层、拉拔、加捻制成，是轮胎主要骨架材料之一。钢丝轮胎帘线包括胎体用钢帘线和带束层用钢帘线。轮胎钢丝帘线一般由不同直径的单丝组成股线捻制而成。根据轮胎规格和使用部位的不同，其单丝根数和帘线的结构亦不同。钢线帘线主要用于全钢子午线轮胎的胎体层和带束层，以及纤维子午线轮胎的带束层。钢丝帘线的帘线结构、表面镀层等均影响其力学性能和黏合性能。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条