说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 氢离子注入
1)  hydrogen ion implantation
氢离子注入
2)  ion implantation
离子注入
1.
Study on characteristics and technology of ion implantation-assisted electroless copper plating films on Al_2O_3 ceramics;
离子注入辅助Al_2O_3陶瓷表面化学镀镀层特性研究
2.
Application of ion implantation and D-gun spraying technology to improve Operation life for jet element of fluid efflux hammer;
应用离子注入和爆炸喷涂技术提高液动锤射流元件寿命
3.
Application of low energy ion implantation in breeding of high yield CGTase strains;
低能离子注入在CGTase高产菌株选育中的应用
3)  Ion-implantation
离子注入
1.
Substituting Epitaxy by Ion-implantation in the Production of Microphone Devices;
改用离子注入替代外延生产话筒管
2.
Study on ion-implantation induced intermixing effect of quantum well by using photoluminescence spectroscopy;
离子注入诱导量子阱界面混合效应的光致荧光谱研究
3.
Using single energy or overlapped energy ion-implantation technology,a modified layer was formed after C ions implanted into uranium.
利用离子注入技术,分别采用单能量和多能量叠加注入方式在铀表面注入碳形成表面改性层,并对改性层的形貌、注入元素的分布和相结构分别进行扫描电镜(SEM)、俄歇电子能谱(AES)及表面相结构衍射谱(XRD)分析,利用电化学极化法测试注入样品的抗腐蚀性能。
4)  implantation [英][,implɑ:n'teiʃən]  [美][,ɪmplæn'teʃən]
离子注入
1.
Ion-implantation-induced transformation and pyrochlore nanodomains in a single crystal YSZ;
离子注入诱发YSZ相变和Pyrochlore纳米晶的电子显微研究
2.
Ion Implantation in Fabricating Strained Si Channel CMOS;
应变Si沟道CMOS中的离子注入工艺
3.
The structure of the aluminum alloy LY12 implanted with N/Ti by plasma based ion implantation (PBII) was characterized using X ray photoelectron spectroscopy (XPS) and glancing X ray diffraction (GXRD).
用X射线光电子能谱 (XPS)和小掠射角X射线衍射 (GXRD)研究了铝合金LY12等离子体基离子注入氮 /钛改性层的结构。
5)  Ions implantation
离子注入
1.
It is analyzed that range distribution and energy deposition distribution of 15 keV nitroger or argon ions implantation in polyether sulfone film.
计算了 1 5 ke V N+和 Ar+注入聚醚砜薄膜的射程分布和能量淀积分布 ,利用计算的结果说明了离子注入聚醚砜膜后 ,薄膜表面电导率增加 (增加 5个数量级 )和光吸收率增加 (最大吸收率从44%增加到 82 。
2.
In this paper, the biological features of saccharomycse stour implanted with low energy ion-beams are studied, and the parameters for ions implantation are established.
研究了以低能离子注入为手段 ,来选育斯托尔酒精酵母 。
3.
Changes in structure and property of tool and mould steel by matallic ions implantation was analyzed in this paper.
对金属离子注入工模具钢造成的结构及性能的变化进行了分析 ,并对其强化机理进行了讨论。
6)  Ion beam implantation
离子注入
1.
In vitro material is always difficult to survive because of freeze injury during ion beam implantation.
离子注入过程中活体材料往往由于真空造成的冻害而不能存活。
2.
After the SOD(superoxide dismutase) was treated with low energy N+ ion beam implantation in different doses,the effect of low energy N+ ion beam implantation on the secondary structure of SOD was studied by circular dichroism,and the effect of the change of secondary structure on the activity of the SOD was analyzed.
超氧化物歧化酶经低能N+离子注入,应用圆二色光谱分析不同剂量低能N+离子注入对超氧化物歧化酶二级结构的影响,并分析了酶蛋白的二级结构变化对酶活性的影响。
3.
This paper discusses and explores the interaction between the implanted ions and cells, and the biological effect of microorganisms by ion beam implantation.
探讨了低能注入离子与生物细胞的相互作用以及离子注入微生物细胞所产生的生物效应。
补充资料:氢离子异体
分子式:
CAS号:

性质:又称质子导体,是能传导氢离子或水合氢离子H3O+的化合物。氢离子导体一般都含水,如杂多酸Hm[XxYyOz]·nH2O(X和Y可代表多种元素),蒙脱石和H3O+β-Al2O3等。它们虽在室温下有较高的电导率,但热稳定性差,随着温度的升高和水的失去,电导率逐渐降低。不含水的氧化物氢离子导体如掺杂SrCeO3和BaCeO3,则不受温度影响,是高温质子导体,在1000℃的电导率达10-2S·cm-1。质子导体可用作氢/氧燃料电池的隔膜材料。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条