说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 磨粒
1)  wear debris
磨粒
1.
3D measuration and reconstruction technology is introduced in analysis of wear debris.
在铁谱分析中引入计算机三维测量与重构技术,通过使用改进拉普拉斯算子对在普通光学显微镜下拍摄到的磨粒连续图像序列进行清晰度分析来测量磨粒表面高度,重构磨粒三维图像。
2.
The evolutions of wear debris characteristics as wear progress in sliding wear process was studied.
为提高基于磨粒的机器状态监测的准确性,研究了磨粒特征随滑动磨损进程的变化规律。
3.
This project focused on the issue to establish the evaluation approach of surface features of wear components based on surface characteristics of wear debris.
建立了基于磨粒表面信息的磨损表面评估方法。
2)  wear particle
磨粒
1.
The design of fractal dimension computing system about the wear particle based on real color;
基于真彩色的磨粒分形维数计算系统的设计
2.
Study about the fractal characterization of the wear particles boundary;
磨粒轮廓分形特征的研究
3)  debris [英]['debri:]  [美][də'bri]
磨粒
1.
Experiment and study of using metal debris - monitoring instrument to monitor sub - magnetic debris;
金属磨粒监测仪监测弱磁性颗粒的试验研究
2.
The basic decision-making probability of wear particle diagnosis information was calculated in detail,and the diagnosis information of all kinds of debris was fused by the combination rules of D-S evidence theory.
从某型发动机磨粒识别后的类型出发,探讨并确立了航空发动机各类磨粒诊断的监控标准,对磨粒诊断信息的基元决策概率值进行了详细计算,反复运用D-S证据理论组合规则对磨粒诊断信息进行融合,得出铁谱分析决策的总支持程度,从而对发动机磨损状态进行判别和分析研究。
3.
Based on the research of existing pattern recognition techniques,the nearest neighbor method,support vector machine(SVM),evidence theory and neural networks(NN) were used to classify the ferrographic debris of a certain aero-engine in order to raise the debris recognition rate.
在充分研究现有的模式识别技术基础上,把近邻法、支持向量机、证据理论、神经网络等用于某型发动机铁谱磨粒的分类,以提高现有的磨粒识别率。
4)  wear particles
磨粒
1.
A novel on-line ferrograph for monitoring wear particles in opaque lube is developed.
研制出1种监测不透光润滑油中磨粒图像可视在线铁谱仪,介绍了其中关键零部件(混合磁铁和磨粒探测单元)的组成及其工作原理,并进行了性能试验研究。
2.
Parameters for shape characteristics were obtained with digital analysis for wear particles image by process technologies of MATLAB image.
利用MATLAB的图像处理技术对铁谱磨粒图像进行数字化分析,求解了磨粒图谱的一些形状特征参数,通过对量化的数据进行统计和比较,揭示了铁谱图像的一些基本特性,以及这些特征所代表的一般意义和在铁谱磨粒图像分析过程中应用。
3.
The sinking motion law of wear particles in the magnetic field detector of on-line Ferrograph was investigated.
研究了在线铁谱仪磨粒探测器中的磨粒沉降运动规律,建立了磨粒在流道-磁极倾角方案下的运动模型,采用有限元法仿真了直流电磁装置的磁场分布情况,并研究了初始高度y0和磨粒直径D等参数对磨粒沉积位置的影响。
5)  abrasive particle
磨粒
1.
The results strongly indicate that both the abrasive particles and porosity in honing stone have an important effect on the service performance.
通过试验对比了国产与进口的氧化铝油石在粗珩阶段的磨削性能,利用扫描电镜观察了油石在加工前后的表面微观形貌,指出油石中磨粒及气孔等因素对油石的磨削能力有较大影响。
2.
The effect of the properties of abrasive particles in slurry, including the morphology and hardness, on the wear resistance of alumina-reinforced yttria-stabilized zirconia polycrystals (3Y-TZP/10wt%Al_2O_3, 10ADZ) was investigated in 5%NaOH slurry containing different abrasive particles using a pin-on-plate tribometer.
在不同磨粒的 5 %NaOH泥浆中 ,采用销 盘式摩擦磨损试验机考察了磨粒对氧化铝增强四方氧化锆多晶陶瓷材料 (ADZ)耐磨性的影响进行了研究。
3.
The wear properties of alumina reinforced Y-TZP composites in 5%NaOH slurry containing different abrasive particle were investigated using a block-on-block friction and wear test apparatus.
采用块 -块摩擦磨损试验机在不同磨粒的 5 %NaOH泥浆中 ,对氧化铝增强四方氧化锆多晶陶瓷材料 (ADZ)的磨损性能进行了研究。
6)  abrasive grain
磨粒
1.
In order to design the experimental scheme of grinding engineering ceramic in reason, the gist of selecting experimental parameters is analyzed and discussed in the aspects of the material remove mechanism, the cutting depth of single abrasive grain and the projecting height of grain on the wheel surface.
为了合理设计工程陶瓷磨削试验方案,从材料去除机理、单颗磨粒切削深度、砂轮表面磨粒突出高度等方面分析探讨了工程陶瓷磨削试验参数的选择依据。
2.
A method for detecting the protrusion height of diamond abrasive grain on diamond wheel was proposed based on the digital image identification technology, and the measuring system was established.
提出一种应用数字图像识别技术检测金刚石砂轮磨粒凸出高度的检测方案,并建立了测试系统。
3.
Analyses of abrasive flow shape by using instantaneous reflective grain_texture photography shows that the forces acting on abrasive grains are determinated by the difference of radial flow speeds,that the relative movement between machined surface and abrasive grains is determined by sliding speed of the wall surface, and that the greater the tangential thrust acting on ab.
根据流变学原理建立了磨料流加工时磨料流动形态的数学模型,利用反光粒子-纹影照相法对磨料流动形态进行的分析表明:沿径向流速差决定了磨粒所受的力;壁面滑动速度决定了磨粒与加工表面的相对运动,磨粒所受的切向力和磨粒与加工表面的相对运动越大,其加工效果越好,实验结果与理论分析的结论基本一致。
补充资料:牛柳粒炒杂菜粒
牛柳粒炒杂菜粒
牛柳粒炒杂菜粒

原料:牛肉半斤、杂菜粒一包.

佐料:盐、糖、酱油、黑椒粉(可因个人口味增减)、油、蒜茸(同黑椒粉)、鸡粉。

过程:

1.将牛肉切粒,若不善刀工者可在市场买的时候就请人代劳。用酱油、油、糖、生粉捞一捞。

2.用少少的油热一下锅,爆香蒜茸;

3.将牛肉粒倒进锅里,中火翻炒一分钟,加入黑椒粉、鸡粉,看牛肉转了颜色就可以装出来,不然牛肉会炒老;

4.不用再加油了,倒入杂菜粒(事先要过水),翻炒一分钟,加一点盐;

5.加入牛肉粒再翻炒1-2分钟;

6.大功告成,上盘。

温馨提示

杂菜粒在一些比较大型的超市里会有配好一包一包售卖的,可以挑选自己喜欢的口味,做菜前只需将其用开水泡一泡就可以了。油不用放得太多,只在开始放上两锅铲就够了,以健康为主。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条