1) direct torque control
直接转矩控制
1.
Application of direct torque control in electric drive of belt conveyors;
直接转矩控制在带式输送机电气传动中的应用研究
2.
MATLAB simulation of speed sensorless direct torque control system;
无速度传感器直接转矩控制系统的MATLAB仿真
3.
A novel compensation method of stator flux estimating in low speed region based on direct torque control system;
一种基于直接转矩控制系统低速时磁链观测补偿的新方法
2) DTC
直接转矩控制
1.
Research on Synthesizing Vector Control Method for Improving the Torque Ripple of Direct Torque Control(DTC);
合成矢量控制法改善直接转矩控制转矩脉动的研究
2.
Modeling and Simulation of PMSM DTC System Using SVPWM;
一种基于SVPWM的永磁同步电动机直接转矩控制系统仿真实验研究
3.
Research on Strategy of Reducing Torque Ripple of DTC;
一种直接转矩控制中降低转矩脉动方法的研究
3) direct torque control(DTC)
直接转矩控制
1.
Permanent Magnet Synchronous Motor Direct Torque Control(DTC)System;
电动汽车用永磁同步电机直接转矩控制系统设计
2.
Due to the larger torque ripple existing in the conventional direct torque control(DTC) system of inductance motor,fuzzy neural network based on Takagi-Sugeno model is adopted to reduce torque ripple and improve control performance.
传统的直接转矩控制存在较大的转矩脉动。
3.
Due to hexagon flux control or six-section circle-flux used in traditional direct torque control(DTC),it is easy to form large torque ripple twelve section control method of voltage select table and the implementation was presented.
由于传统的直接转矩控制采用六边形磁链控制或六区间的圆形磁链控制,容易造成转矩脉动大。
4) direct torque control (DTC)
直接转矩控制
1.
It is very important to reduce the loss of motors, and a minimum loss control method combined with direct torque control (DTC) method was used to reduce the motor loss through on-line adjusting the flux reference based on the analysis of permanent magnet synchronous motor (PMSM) loss models and modeled in the MATLAB.
降低电机的损耗对于节能有重要的意义,分析永磁同步电机(PMSM)损耗模型的基础上,结合直接转矩控制方案,通过实时在线调节磁链给定的控制算法,使永磁同步电机运行于最小损耗控制方式下,并利用MATLAB仿真软件建立了系统模型。
2.
To reduce the large torque ripple of induction machine subjected to conventional direct torque control (DTC) at low speeds, a new control strategy of DTC was proposed.
针对传统的异步电动机直接转矩控制在低速时存在转矩脉动比较大的问题,提出了一种新的减小转矩脉动的直接转矩控制方法,在传统异步电机直接转矩控制的基础上推导出转矩微分方程,分析了转矩脉动的原因。
3.
Based on the analysis of the increment of the electromagnetic torque of the induction motor (IM), this paper explains the reason why the IM performance in the low speed region is poor under conventional direct torque control (DTC).
首先通过对感应电机转矩增量的分析,解释了传统直接转矩控制中低速性能较差的原因。
5) direct self control
直接转矩控制
1.
Simulation analysis of influence of rotor resistance variation on direct self control for asynchronous motor;
转子电阻变化对异步电机直接转矩控制影响的仿真分析
2.
Modeling and simulation of induction motor direct self control system based on MATLAB/SIMULINK;
基于 MATLAB/SIMULINK 的异步电动机直接转矩控制系统的建模和仿真
3.
Study of direct self control theory in asynchronous motor;
交流异步电机直接转矩控制理论的研究
6) torque control/DTC
转矩控制/直接转矩控制
补充资料：世间转法转智转无尽
【世间转法转智转无尽】
世间转者，谓展转摄前众生界、世界、虚空界也。法转者，谓展转摄前法界、涅槃界、佛出现界也。智转者，谓展转摄前如来智界，心所缘佛智所入境界也。盖此三转，皆言无尽者，以世法智之三种，展转含摄，无有穷尽，是名世间转、法转、智转无尽。
世间转者，谓展转摄前众生界、世界、虚空界也。法转者，谓展转摄前法界、涅槃界、佛出现界也。智转者，谓展转摄前如来智界，心所缘佛智所入境界也。盖此三转，皆言无尽者，以世法智之三种，展转含摄，无有穷尽，是名世间转、法转、智转无尽。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条