1) adhesive
[英][əd'hi:sɪv] [美][əd'hisɪv]
粘接剂
1.
Study and prepariration on IIR adhesive in PE film;
聚乙烯薄膜粘接剂的研制
2.
In-vitro Study on Adhesive Remnant Mode when Debonding Orthdontic Brackets;
正畸托槽去除时粘接剂残留模式的体外研究
3.
SMT Line Configurations And Adhesive Dispensing Processes;
SMT生产线配置与粘接剂涂覆工艺
2) binder
[英]['baɪndə(r)] [美]['baɪndɚ]
粘接剂
1.
Application of PANa Resin Binder in Foundry Production;
PANa树脂粘接剂在铸造生产中的应用
2.
M40J graphite fiber reinforced aluminum composite is fabricated by a vacuum liquid infiltration process and the effects of an acid phosphate binder on the properties of the fiber preform and its composite are studied in this paper.
以高模高强石墨纤维Ｍ４０Ｊ增强铝基复合材料为研究对象，研究了真空液相压渗工艺中，偏磷酸铝粘接剂对纤维预制件抗压性能及复合材料力学性能的影响。
3.
The tongue-and groove binding of VRLA cell case and cover,binding processing,various binders for this purpose and a great number of performance data gained after curing were presented in detail,and the perferred binders for this processing were suggested.
研究了阀控铅酸蓄电池槽盖的封合粘接的技术及应用,列出了应用各种粘接剂在固化后所取得的性能数据,并对不同粘接剂的效果进行了综合分析。
3) adhesives
粘接剂
1.
Comparison on Shear Bond Strength of Edgewise Brackets Bonding with Three Orthodontic Adhesives Against Salivary Contamination;
3种正畸粘接剂抗唾液污染的剪切强度比较
2.
Study of Fluoride Released from Fluoride-releasing Adhesives;
含氟牙釉质粘接剂释氟的实验研究
3.
Research progress of adhesives for maxillofacial prostheses
颜面赝复体粘接剂的研究进展
4) cement
[英][sɪ'ment] [美][sə'mɛnt]
粘接剂
1.
The influence of cements on the colour of two kinds of all-ceramic restoration;
不同粘接剂对全瓷修复体颜色影响的实验研究
2.
Shear bond strength of all-ceramic cement to dentin;
全瓷粘接剂对牙本质的粘接抗剪强度考察
5) adhensive
粘接剂
1.
Comparison on shear bond strength of edgewise brackets bonding with three orthodontic adhensives under different adhensive conditions;
3种正畸秞质粘接剂在不同粘接条件下的抗剪切强度比较
2.
The adhensive, which ismade of oligomer of Tetraethylorthosilicate can control the particl size when the mould-ing is sintered.
为ＳｎＯ２气敏材料成型而加入的粘接剂，不仅对烧结体的机械强度有影响，还对元件的灵敏度、选择性、稳定性有影响，以正硅酸乙酯做为粘接剂，在元件烧结过程中，有抑制晶粒成长的“烧结阻碍”作用，使粒径大小控制在一定的程度，从而控制元件的电阻值、灵敏度和长期稳定性，这种粘接剂提高烧结体的抗压强度的现象与粘接剂中的硅含量有关，硅含量愈多，抗压强度愈高。
3.
Objective: To compare the shear bond strength(SBS) and adhensive remnant index(ARI) score of Edgewise brackets bonding with three adhensive under moist and dry conditions.
目的:通过比较3种正畸秞质粘接剂在干性和湿性两种不同粘接条件下的抗剪切强度以及托槽去除后牙面粘接剂的残留指数,探讨使用何种粘接剂既可产生最佳的临床粘接强度,同时又防止秞质崩裂、节省椅旁操作时间,简化操作流程。
补充资料：GRF粘接剂
分子式：
CAS号：
性质：由明胶、间苯二酚混合物及甲醛水溶液组成的双液粘接剂，简称为GRF粘接剂。使用时在组织面涂布甲醛溶液，将加热至40℃左右的明胶/间苯二酚混合物涂布均匀，滴加几滴甲醛液，2～3min后完成粘接。适用于皮肤与黏膜的粘接，可防止实质性脏器的出血等。不宜用作组织或脏器的粘接以及代替缝合。
CAS号：
性质：由明胶、间苯二酚混合物及甲醛水溶液组成的双液粘接剂，简称为GRF粘接剂。使用时在组织面涂布甲醛溶液，将加热至40℃左右的明胶/间苯二酚混合物涂布均匀，滴加几滴甲醛液，2～3min后完成粘接。适用于皮肤与黏膜的粘接，可防止实质性脏器的出血等。不宜用作组织或脏器的粘接以及代替缝合。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条