说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 喷焊
1)  spray welding
喷焊
1.
Study of spray welding procedure of anti-abrasion and erosion coating on the oil siliceous earth pump;
油白土泵抗磨蚀涂层喷焊工艺研究
2.
Study on cavitation erosion resistance of flame spray welding nickel-based and copper-based coatings;
镍基、铜基喷焊覆层的耐气蚀性研究
3.
Extensive spray welding on the blade of large scale axial-flow hydraulic turbine;
大型轴流式水轮机叶片的大面积喷焊
2)  spray-welding
喷焊
1.
Microstructure and mechanical property of cast iron spray-welding;
铸铁喷焊组织及力学性能
2.
Technology of spray-welding powder hard metal alloy on 1Cr13 large type of gate;
1Cr13大型闸板喷焊粉末硬质合金工艺
3.
Microstructure of WC reinforced Ni-based self-fluxing alloy composite coating prepared by oxy-acetylene flame spray-welding was investigated by scanning electron microscopy(SEM),electron probe micro-analysis(EPMA),X-ray diffraction(XRD) and transmission electron microscopy(TEM).
采用扫描电镜、电子探针、X射线衍射和透射电镜技术分析了氧乙炔火焰喷焊WC增强镍基自熔性合金复合涂层的组织结构,并采用湿砂橡胶轮式磨粒磨损试验机对该涂层与等离子喷涂NiCr/Cr3C2涂层的磨损性能进行了实验比较。
3)  flames spray-welding
火焰喷焊
1.
WC/Ni coating was made on TC4 alloys surface by using flames spray-welding,and the microstructure, composition,phase structure and microhardness of the coating were tested and analyzed.
采用火焰喷焊技术对TC4合金表面喷焊Ni基WC。
2.
The possibility of Ni-based WC coating on titanium alloys substrate through flames spray-welding technique was explored,and the microstructure and properties of the coating were determined using SEM,XRD and so on.
研究了在钛合金Ti-6A l-4V表面上采用火焰喷焊技术制备镍基碳化钨型自熔性合金涂层的可行性,利用SEM、XRD等手段分析了它的组织和性能。
3.
Two kinds of Ni-base coatings with 0% and 4% La2O3 addition respectively on titanium alloys substrate made by flames spray-welding technique were prepared, and their microstructure, elemental distribution, micro-hardness and tribological properties under dry sliding against steel were studied.
采用火焰喷焊技术在钛合金基体上制备了不加La2O3和加4%(质量分数)La2O3两种镍基涂层,分析了它们的显微组织、合金元素的扩散、显微硬度以及耐磨性能。
4)  flame spray-welding
火焰喷焊
1.
Ni60+WC clad layers on the 45 steel substrate were produced by l aser cladding and flame spray-welding,respectively.
分别采用激光熔覆与粉末火焰喷焊两种技术在45钢基体表面制备Ni60+20%WC合金涂层,比较其组织结构和性能。
5)  spray welded coating
喷焊涂层
6)  Ni 60 spray welded coating
Ni60喷焊层
补充资料:激光喷码机与喷墨喷码机的比较
喷印的图案文字和数码主要包括生产日期、有效期、批号、条形码以及商标图案。防伪标记和中文字样等,是贯彻卫生法和促进包装现代化强有力的设备。

    这种技术广泛应用于多行业,多材质表面,运行高速,稳定,适配各种车间,生产线工况的包装标刻。应用材质包括纸张、PVC、玻璃、塑料、橡胶、木材、陶瓷、皮革、布料等各种材质。应用对象目前主要分两大类,一类是产品的包装,主要分布在食品、饮料、烟草、酒类及医药行业:另一类是产品本身,即在产品上标注其规格型号等,使其成为产品本身的一部分内容,主要分布在电线电缆、建筑材料、电子产品和商务印刷等行业。


按此在新窗口浏览图片

按此在新窗口浏览图片
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条