1) gelling
[英][dʒel] [美][dʒɛl]
成胶
1.
The effect of HPAM concentration,the mass ratio of HPAM to AlCit and time on the gelling properties of HACDS was evaluated.
以部分水解聚丙烯酰胺、柠檬酸铝为主要材料合成了可用于油藏深部调驱的新型胶态分散体系(HACDS),评价了HPAM浓度、放置时间、HPAM/AlCit质量比对HACDS成胶性能的影响,并利用自吸吸入法研究了HACDS对岩石润湿性的影响。
2.
In-situ gelling and flooding experiments for micro-gel system were performed in long-core sand-packs to study its gelling behavior under flowing condition.
使用长岩心渗流试验装置 ,模拟油藏条件开展微凝胶体系动态成胶和驱油试验 ,研究了低浓度微凝胶体系在长岩心填砂模型中的动态成胶特征、流动特性和驱油效果。
3.
It also discusses the gelling mechanism,oil displacement mechanisms and the factors influencing the oil displacement efficiency by clay gel.
该文阐述了粘土胶驱油剂性能的室内实验研究；介绍了粘土胶驱油的宏观和微观物模驱油试验方法、步骤和结果；讨论了粘土胶驱油体系的成胶机理、驱油机理和对粘土胶驱油的影响因素。
2) colloidal forming
胶态成型
1.
In this paper,various colloidal forming techniques including SC,PIM,GC,DCC,TIF,HAS, EPD and are introduced.
重点介绍了几种主要陶瓷基复合材料胶态成型工艺,包括注浆成型、注射成型、凝胶注模成型、直接凝固注模成型、温度诱导絮凝成型、水解辅助固化成型、电泳浇注成型和溶胶-凝胶法成型。
2.
A novel colloidal forming processing of ceramics was investigated.
研究了一种新的凝胶成型工艺,将硅溶胶-凝胶特性成功运用于陶瓷部件胶态成型。
3.
The micro mechanisms of the generation of agglomerations in ceramic suspensions used in colloidal forming processing were investigated.
研究了陶瓷胶态成型过程悬浮体中产生团聚体的微观机理,根据液体介质中陶瓷粉体颗粒之间的作用势,建立了团聚体产生的微观结构模型。
3) synthetic rubber
合成橡胶
1.
Production and market of butadienyl synthetic rubber;
丁二烯基合成橡胶的生产与市场
2.
Status and development proposal on synthetic rubber industry in China Ⅰ.Status analysis;
我国合成橡胶工业现状及发展建议Ⅰ.现状分析
3.
Production status and development trend of synthetic rubber industry at home;
中国合成橡胶工业的发展、现状及展望
4) colloidal forming
胶态成形
1.
Colloidal forming,solid mouldless forming and gas phase forming techniques are introduced in this paper.
笔者介绍了胶态成形、固体无模成形工艺及气态成形,对上述工艺的原理、工艺过程及特点进行比较,提出了陶瓷成形工艺的关键问题。
2.
In-situ colloidal forming of ceramics is the most promising method in making the near-net-shape and complicated ceramics, to which silica and alumina sol have been widely applied.
陶瓷原位胶态成形方法是制备近净尺寸复杂陶瓷部件最具应用前景的方法,硅溶胶、铝溶胶也越来越多的应用于其中。
5) in-situ gelation
地下成胶
6) SIBR
集成橡胶
1.
The effect of raw SIBR Mooney viscosity on the properties of mix and vulcanizate was investigated and compared to that of SSBR1204.
研究不同门尼粘度的集成橡胶(SIBR)混炼胶和硫化胶的各项性能,并与溶聚丁苯橡胶(SSBR1204)进行对比。
2.
The effect of the silica on the properties of SIBR compound by substituting for the same level of carbon black was investigated.
研究白炭黑等量替代炭黑对集成橡胶(SIBR)胶料性能的影响。
补充资料：桐油成胶点
分子式：
CAS号：
性质：是鉴定桐油掺假与变质用的一个特性项目，指桐油转化为成胶物所需的温度。一般正常桐油如迅速加热至280℃，则4～8min即可成胶。成胶物用刀切剖时，硬脆不粘。但掺有其他油类或转变为β-型桐油时均可使成胶发生变化。此试法称为华氏试验(Worstall test)。
CAS号：
性质：是鉴定桐油掺假与变质用的一个特性项目，指桐油转化为成胶物所需的温度。一般正常桐油如迅速加热至280℃，则4～8min即可成胶。成胶物用刀切剖时，硬脆不粘。但掺有其他油类或转变为β-型桐油时均可使成胶发生变化。此试法称为华氏试验(Worstall test)。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条