1) room temperature and atmospheric pressure
常温常压
1.
The catalytic activity of the prepared catalyst was investigated by catalytic wet peroxide oxidation process(CWPO)at room temperature and atmospheric pressure,and azo dye,C.
采用浸渍法制备用于常温常压下催化湿式过氧化氢氧化工艺(CWPO)的负载型Fe2O3/γ-Al2O3催化剂,采用BET,SEM,XRD,XPS和XRF对其进行了表征,并以偶氮染料酸性橙为特征污染物,考察了Fe2O3/γ-Al2O3催化剂的催化活性和稳定性。
2.
Several supported catalysts were prepared by impregnation-calcination process and their catalytic activities for catalytic wet hydrogen peroxide oxidation(CWPO)under room temperature and atmospheric pressure were investigated using simulated wastewater containing azo dyes as treatment object.
采用浸渍焙烧法制备了几种负载型催化剂,以偶氮染料模拟废水为处理对象,考察了这几种催化剂在常温常压下催化湿式过氧化氢氧化工艺中的催化活性。
3.
In order to solve this problem, catalytic wet oxidation (CWO) under room temperature and atmospheric pressure was developed in this disssertation, which allowing the possibil.
针对这些问题,本文系统地研究了常温常压催化湿式氧化(Catalytic Wet Oxidation,简称CWO)工艺,该工艺具有反应条件温和、处理效果好等优点。
2) normal temperature and pressure
常温常压
1.
A Study on intensified alkaline leaching pretreatment method to Yangshu refractory gold ore at normal temperature and pressure;
某含砷难浸金精矿常温常压强化碱浸预处理试验研究
2.
After the pretreatment of intensified alkaline leaching under normal temperature and pressure,the dissolution of gold is raised to 85.
采用常温常压碱浸强化预氧化工艺处理后,在NaCN用量6kg/t、氰化时间24h的条件下,金的浸出回收率提高到85。
3) room condition
常温常压
1.
This paper has evaluated the catalytic wet oxidation for the degradation of an azo dye,methyl orange under the room conditions.
以Fe、Mn、Cu和Zn的金属氧化物为活性组分,以γ-Al2O3为载体,制备了负载型催化剂,并分别以H2O2和NaClO为氧化剂,对比了在常温常压条件下催化湿式氧化工艺中处理甲基橙模拟废水的效果。
4) ambient temperature and pressure
常温常压
1.
Although many methods for synthesis of diamond and cubic-boron nitride at ambient temperature and pressure had been established, diamond-like B_2O can be only synthesized at high temperature and pressure.
本文首先综述了金刚石的人工合成方法的发展历程和富硼氧化物B_2O的研究现状,并详细的介绍了在常温常压条件下,使用离子液体体系电化学合成金刚石型B_2O的研究工作。
5) normal temperature and higher pressure
常温加压
1.
Different behaviours and risk for LPG at normal temperature and higher pressure as well as at lower temperature and normal pressure were analyzed,and potential fire and explosion consequence was assumed.
分别分析了LPG常温加压和低温常压储存的不同特点和LPG储存过程中的危险性和各种可能出现的火灾爆炸事故后果;设定了常见的LPG储存泄漏时效模式,运用PHAST软件模拟分析了LPG常温加压和低温常压储存的各种火灾爆炸事故的危害范围;比较两种储存条件下的危害后果,得出了LPG低温常压储存具有更高的安全性和经济性。
6) abnormal temperature and pressure
温压异常
补充资料：常温干燥
分子式：
CAS号：
性质：在常温条件下使涂膜干燥的工艺过程，也称自然干燥或空气干燥(air drying)。干燥时的气温、相对湿度和通风状况是影响干燥的重要因素。温度一般为10～35℃，相对湿度为75％以下，室内通风量为6～10次/h；室外风速在3级(3.4～5.5m/s)以下为宜。
CAS号：
性质：在常温条件下使涂膜干燥的工艺过程，也称自然干燥或空气干燥(air drying)。干燥时的气温、相对湿度和通风状况是影响干燥的重要因素。温度一般为10～35℃，相对湿度为75％以下，室内通风量为6～10次/h；室外风速在3级(3.4～5.5m/s)以下为宜。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条