说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 推拉丝短路过渡
1)  push-pull short-circuit transfer
推拉丝短路过渡
1.
The authors analyzed some reasons of reducing energy input in welding process by adopting lowenergy -input (LEI) welding, through comparing traditional short-circuit transfer to push-pull short-circuit transfer.
为了研究低能量输入焊接法参数匹配对能量输入的影响规律,通过对比传统短路过渡与推拉丝短路过渡的特点,分析了推拉丝短路过渡可以降低能量输入的原因。
2)  Push&Pull feeding short-circuit CO_2 welding
推拉丝短路过渡CO_2焊
3)  short circuit transfer
短路过渡
1.
Study on modeling and simulation of short circuit transfer of inverter arc welding system;
短路过渡焊接电源系统建模及仿真研究
2.
Analysis and forecase of dynamic GMAW system on short circuit transfer;
短路过渡GMAW系统中参数变化的预测分析
3.
The technology of butt jointing thin plates by CO_2 shielded spot arc welding with short circuit transfer;
CO_2气体保护焊短路过渡电弧点焊对接薄板技术
4)  short-circuit transfer
短路过渡
1.
Effects of voltage of power supply on the short-circuit transfer process in water vapor arc welding;
电源电压对水蒸气保护焊短路过渡过程的影响
2.
High-speed paragraph research on short-circuit transfer process of CO_2 welding;
CO_2焊短路过渡过程的高速摄影研究
3.
After the definition of molten droplet size in short-circuit transfer mode was given and the analysis system for molten droplet size and arc signals based on MATLAB platform was introduced,the characteristic of molten droplet size in short-circuit CO_2 arc welding using the power supply with constant voltage output,the relationsh.
建立了基于高速CCD摄像的熔滴图像检测和焊接电流、电弧电压同步采集系统,在给出短路过渡模式下的熔滴尺寸定义并简述基于MATLAB平台的熔滴尺寸与电弧信号分析系统的基础上,对平特性电源短路过渡CO2焊接熔滴尺寸变化特征及其与工艺性能间的关系进行了试验研究。
5)  short circuiting transfer
短路过渡
1.
Modeling and analysis of droplet forming in gas metal arc welding short circuiting transfer;
气体保护焊短路过渡熔滴成形的建模分析
2.
Dynamic model of GMAW system with short circuiting transfer;
GMAW短路过渡动态模型的建立
3.
Results showed that with the different matching of welding current and arc voltage,the mode of metal transfer consists of short circuiting transfer,globular transfer,mixing transfer,projected transfer and streaming transfer etc.
结果表明,双丝间接电弧氩弧焊焊接电流与电弧电压的不同匹配选择,熔滴具有短路过渡、大滴过渡、混合过渡、射滴过渡、射流过渡等不同过渡形式。
6)  short-circuiting transfer
短路过渡
1.
Influence of dynamic electromagnetic force on stability of short-circuiting transfer in GMAW
电磁力动态变化对短路过渡稳定性的影响
2.
The regular of the arc-time and short-circuiting transfer cycle time was investigated under the high speed welding.
利用汉诺威焊接质量分析仪,检测CO2焊短路过渡过程的电参数信号,研究高速焊接情况下燃弧时间与短路过渡周期的变化规律,分析了高速CO2焊接过程中短路过渡各个电参数对焊接过程稳定性的影响。
3.
The effects of the short-circuiting transfer parameters on weld formation quality in high speed CO2 welding process were analyzed.
分析了高速CO2焊接过程中短路过渡参数对焊缝成形质量的影响。
补充资料:推三推四
1.同"推三阻四"。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条